Enlight Sniper Power 650W PSU

On First Page2. The Unit


Introduction

Enlight are  a well known manufacturer of PC components and peripherals, albeit not very popular among hardcore enthusiasts. They are a conservative company with few high end products and they mainly aim at the value and mainstream segments of the market. They do have a few products designed for gamers and enthusiasts though, and today we will take a look at one of them; the Sniper Power 650W PSU. Enlight currently has no 800W+ units and this product is their second most powerful they currently produce, but its output is more than enough for the needs of the majority of PC enthusiasts and gamers. Let us have a closer look at it and see how well it can really perform.


Manufacturer Features and Specifications

  • 1 x 24 pin mainboard power
  • 1 x 4 pin 12V
  • 1 x 8 pin EPS12v
  • 2 x Loom with 3×4 pin MOLEX + 1.4 pin FDD (Total 6+1)
  • 2 x Loom with 3 x SATA Power (Total 6)
  • 1 x Loom with 2 x 6 pin PCI Express Connectors
  • 120mm Fan (2xBall Bearing) Temperature Controlled
  • Short Circuit Protection
  • Over Voltage Protection
  • Over Current Protection
  • Active PFC > 95% Efficiency
  • 80 PLUS® Efficient
  • Low Acoustics
  • 3 x 12v Rails
Voltage 5V
Regulation ±5%
MinimumLoad 0.3A
MaximumLoad 25.0A
Ripple & Noise(Vp-p) 70 mV
Voltage 3.3V
Regulation ±5%
MinimumLoad 0.5A
MaximumLoad 25.0A
Ripple & Noise(Vp-p) 70 mV
Voltage 12V1
Regulation ±5%
MinimumLoad 1.0A
MaximumLoad 16.0A
Ripple & Noise(Vp-p) 150 mV
Voltage 12V2
Regulation ±5%
MinimumLoad 1.0A
MaximumLoad 16.0A
Ripple & Noise(Vp-p) 150 mV
Voltage 12V3
Regulation ±5%
MinimumLoad 1.0A
MaximumLoad 16.0A
Ripple & Noise(Vp-p) 150 mV
Voltage -12V
Regulation ±10%
MinimumLoad 0.0A
MaximumLoad 0.5A
Ripple & Noise(Vp-p) 150 mV
Voltage 5Vsb
Regulation ±5%
MinimumLoad 0.0A
MaximumLoad 2.5A
Ripple & Noise(Vp-p) 70 mV

Rail
Wattage
Maximum load
+3.3V
180w
631.5W
25.0A
+5V
25.0A
+12V1
540w
16.0A
45A
+12V2
16.0A
+12V3
16.0A
-12V
6w
18.5W
0.5A
+5Vsb
12.5w
2.5A

Packaging and Bundle

The Enlight Sniper Power 650W unit is packed inside a fancy cardboard box. There is plenty of artwork and details concerning the features of the unit, but the box itself is thin and there is little protection for the unit itself. Inside the box you will also find a typical AC power cable, a small manual and four 3M mounting screws.

Leave a Reply

Related posts

SilverStone Roundup July 2014 – featuring GD09 Case, ST60F PSU and AR02 Cooler

SilverStone Roundup July 2014 - featuring GD09 Case, ST60F PSU and AR02 Cooler

There was a time a few years ago that Hi-Fi/AMP like HTPC cases were everywhere. That has changed a bit in recent times due to some excellent m-ATX boards allowing builds in compact chassis however there is still something about the home theatre component style of design which can be appealing...

Antec Roundup July 2014 – featuring Nineteen Hundred Case and Kuhler 950/1250

Antec Roundup July 2014 – featuring Nineteen Hundred Case and Kuhler 950/1250

Antec are well known for creating high performance cases and PSUs, with many of their models receiving awards from us in the past. In recent times they have also created some high performance liquid coolers and even branched out into audio products. Today we have a roundup of a little of...

Cooler Master Silencio 652S Case Review with Seidon 120v Cooler

Cooler Master Silencio 652S Case Review with Seidon 120v Cooler

Cooler Master Silencio 652S Review inc Seidon 120v Cooler / G650M PSU Last year Cooler Master launched a new model in their Silencio range, the 652, designed to offer low noise operation with plenty of flexibility in terms of component choice. Recently Cooler Master announced a refresh...