AMA Serac 770 Watercooling

On First Page2. AMA Serac 770 Watercooling


Introduction

Enthusiasts have been watercooling computers for years, allowing them to run massive overclocks while keeping components cool with minimum noise. However, despite the advantages, the majority of users tend to overlook watercooling as an option when building a computer. There are a number of reasons for this, the first being cost. Air cooling generally requires less overhead and a high end cooler will ultimately be sufficient for the majority of users. On the other hand, watercooling can provide similar or better thermal performance in an almost silent environment, while most traditional air cooled setups providing similar temperatures can be loud.

Another issue with watercooling is that it isn’t always as easy to setup which has undoubtedly scared off a lot of potential users. However, you can pick up kits which come with all the gear you need and are fairly straightforward to assemble. Today we’re going to look at a kit from a new manufacturer, the Serac 770 from AMA. It is a reasonably compact kit which aims to provide easy installation and an effective cooling solution.

Manufacturer’s Specifications

CPU Support

Intel® Core™2 Extreme/ Core™2 Quad (Quad-Core)
Intel® Core™2 Duo/ Pentium® Dual Core/ Pentium® D (Dual-Core)
Intel® Pentium® 4 HT/Celeron® D
AMD Athlon™ 64
AMD Athlon™ 64 FX/X2
AMD Phenom™ FX/X3/X4
AMD Sempron™

CPU Socket

Intel LGA 775
AMD 754/939/940
AMD AM2/AM2+/socket F(1207)/1207+

Water block

Dimension

52.0×13.0(H) mm

Material

Copper with nickel-plating

Pump&Tank

Dimension

64(L)x50(W)x101.3(H) mm

Flow Rate

120 L/hr

Rated Voltage

DC 12V

Tank Capacity

130 c.c.

Connector

4-pin power supply connector

LED

Blue LED

Acoustic

16 dBA

Radiator

Dimension

135(L)x57(W)x168(H)mm

Material

Aluminum

Fan Dimension

120mm

Max. Fan Speed

1,250 rpm with PWM function

Acoustic

19 dBA (at normal operation)

Fan Connector

4 pin with PWM function

Tube

Dimension

6mm(ID) x 8mm(OD)

Material

PU

Coolant

Capacity

500 c.c.

Main Material Ingredient

Ethylene Glycol

Packaging & Bundle

The Serac 770 arrives in a relatively attractive box with a glossy reflective finish.  The front has two circular windows, allowing us to see the radiator and water block through the packaging. AMA has provided some pretty good looking equipment with the kit, so the windowed display works and draws attention well. It has a fitting name too, Serac being a word used to describe blocks of ice that form on glaciers.

The sides contain the specifications and information on a couple of the key features. On the back we see the kit set up on an Asus Striker II Extreme motherboard, which clearly illustrates the market they are targeting.

Once opened, the packaging reveals another box and a Styrofoam piece containing the kit. Sitting in the Styrofoam are the three major components of the kit; the radiator, pump/reservoir, and the water block.

Leave a Reply

Related posts

Libratone Loop Review (AirPlay Compatible)

Libratone Loop Review (AirPlay Compatible)

Today we take a look at an interesting product in the wireless speaker marketplace in our Libratone Loop Review.

Final Fantasy Type-0 HD trailer shows off new visuals

Final Fantasy Type-0 HD trailer shows off new visuals

Square Enix has released a new trailer for the upcoming Xbox One and PS4 remake, Final Fantasy Type-0. Final Fantasy Type-0 HD is a remake of the series spin-off that originally launched on PlayStation Portable in Japan in 2011. http://www.youtube.com/watch?v=C0rPrzbZxcg Type-0 is most...

Super Talent Updates Its 7-pin SATA Flash Disk Module

Super Talent Updates Its 7-pin SATA Flash Disk Module

Super Talent Technology, a leading manufacturer of NAND Flash storage solutions, updates its 7-pin SATA FDM with the 7-pin SATA SJ1. The very popular 7-pin SATA FDM is now available in a SATA III version which allows for read speeds of up to 300 MB/s and write speeds of up to 100 MB/s. These...