Xigmatek NRP-PC602 600W PSU Review - HardwareHeaven.comHardwareHeaven.com
LT Panel
RT Panel
Saturday | December 10, 2016
Popular Review Links:
Xigmatek NRP-PC602 600W PSU Review

Xigmatek NRP-PC602 600W PSU Review

Product image

Xigmatek NRP-PC602 600W PSU – Introduction

There are many power supply products available to the budget-minded enthusiasts in today’s marketplace. Every power supply manufacturer has at least one series of units combining performance and good value, each with its distinct set of features and performance. Today we are going to have a look at a new PSU from Xigmatek which is designed with high electrical efficiency and a value orientated price in mind. It has to compete against many similar products from several manufacturers so will really have to excel in one area to stand out.


Manufacturer Features & Specifications

  • High efficiency over 85% – Higher efficiency, lower energy loss, cooler our Earth.
  • Compliant with ATX12V Ver.2.3 – Compliant with latest Intel ATX12V Ver.2.3 PSU design guide.
  • 0.99 Active PFC rate – The highest AC utility rate and active switch for universal AC voltage.
  • Real and stable 600W output – Continuous 600W total DC output for real 100% loading.
  • DC quality with low ripple noise – Low ripple noise DC output for better devices performance.
  • Japanese 105°C Main Capacitor – High-end and more stable Japanese capacitor for better output performance.
  • 140mm silent cooling fan – The bigger fan is equal to lower RPM and less noise.
  • Smart thermal fan control – Fan RPM was controlled by temperature and keep silence in typical loading.
  • All DC cables with mesh sleeve – Reduce airflow resistance for better thermal release in PC case.
  • PCIe graphic card connector support – Support high-end graphic card with PCIe 6/8pin connector.
Product Name NRP-PC602
Product Number CPH-0600U-X02
Power 600W
Dimension 150mm(L) x 160mm(W) x 86mm(H)
Power Factor PF > 0.9
Cooling System 14cm fan, Max. 1800RPM±10%
Hold-up Time 16ms
Noise Level 16dBA ±10% at 800RPM

INPUT
Input Voltage 100-240VAC
Input Frequency Range 47/63Hz
MTBF 100,000 hrs minimum (at 25°C)
Input Current 115Vac/10A max. 230Vac/5A max.

OUTPUT
  Max/Min Regulation Ripple & Noise Output
+5V 15.0A/0.2A +5, -5% 50mV 130W
+3.3V 24.0A/0.5A +5, -5% 50mV
+12V1 30.0A/0.5A +5, -5% 120mV 504W
+12V2 22.0A/1.0A +5, -5% 120mV
-12V 0.3A/0.0A +10, -10% 120mV 3.6W
+5Vsb 2.5A/0.1A +5, -5% 50mV 12.5W
Total Power 600W

Environment
Operating Temp. 10°C to 40°C
Storage Temp. -40°C to 70°C
Operating Humidity 20% to 90%, non-condensing
Storage Humidity 5% to 95%, non-condensing

Protection
  DC Rail Trigger Point/Range
Over Voltage Protection Trippunkt +3,3 V 4.5 V max.
Trippunkt +5,0 V 7.0V max.
Trippunkt +12,0 V 15.6V max.
Over Current Protection The power supply should provide OCP and should shutdown before 240VA of each output power (included +5V, +3.3V). The power supply should provide OCP when over current output of each output power (included +12V).
Short Protection All output to GND

About Author

Stuart Davidson

It appears you have AdBlocking activated

Unfortunately AdBlockers interfere with the shopping cart process

To continue with the payment process can we ask you to

deactivate your AdBlocking plugin

or to whitelist this site. Then refresh the page

We thank you for your understanding


Hardwareheaven respect you right to employ plugins such as AdBlocker.
We would however ask you to consider whitelisting this site
We do not allow intrusive advertising and all our sponsors supply items
relevant to the content on the site.

Hardwareheaven Webmaster