LT Panel
RT Panel
Saturday | July 30, 2016
Popular Links:
Corsair GS800 Power Supply Review

Corsair GS800 Power Supply Review

Corsair GS800 Power Supply Review

Testing Results – Synthetic

Corsair GS800 Power Supply Power Supply Testing Results
40°C 200W 400W 600W 800W
3.3V 3.299V 3.303V 3.300V 3.299V
5V 5.003V 5.010V 5.005V 5.001V
12V 11.998V 12.040V 12.020V 12.012V
Efficiency 84.2% 85.6% 83.9% 81.3%
Noise Level
(PSU Only)
30dBA 32dBA 34dBA 37dBA
Ambient Temp 25°C 25°C 25°C 25°C
Exhaust Temp 40°C 43°C 44°C 49°C

Oscilloscope AC Ripple (mV p-p) +3.3 +5 +12
850W 12 35 79

In our first set of results, shown above, we look at the performance of the unit when using our various testing tools to stress the PSU in a controlled environment at 40c. Looking first to the 12v, 3.3v and 5v performance we have a PSU which supplies good readings across the board. As expected performance is strong in the 400w-500w range, well within specification. AC ripple is very good, exceeding the recommended ratings by some way. The standard for the industry states no more than 50Mv on 3.3/5v and 120mv on 12v so Corsair are well within specification at 12/35(out of 50) on 3.3/5v and 79(out of 120) on 12v.

Looking at the efficiency of the PSU, the 800w version meets the 80 Plus specification, even at 40c with the 100% load reading a little above the 80% required. That said, we are testing at a much higher (more demanding) temperature than is use for the official certification. Noise levels are also good with the unit remaining near silent for the majority of our testing, only becoming noticeable at around 80% load.

Finally we have exhaust temperature. The results produced by our sample were decent, not quite at the level of Corsairs higher spec units but perfectly acceptable.

About Author

Stuart Davidson

Stuart Davidson is Senior Editor at HardwareHeaven having joined the site in 2002.