NVIDIA GeForce GTX 660 Ti Overclocked Graphics Card Review

On First Page2. EVGA GTX 660 Ti SuperOverclocked


NVIDIA GeForce GTX 660 Ti Review - Overclocked (EVGA, Palit and Zotac)

NVIDIA GeForce GTX 660 Ti Launch Review featuring:
EVGA GeForce GTX 660 Ti SuperClocked
Palit GeForce GTX 660 Ti JetStream
ZOTAC GeForce GTX 660 Ti AMP! Edition

AMD were reasonably quick to market with their latest generation of graphics cards, quickly releasing the 7900s, 7800s and 7700s but other than a few refreshes things have gone a little quiet of late. NVIDIA meanwhile were later to market with the GTX 680 and since then have launched products steadily with the GTX 670 and 690 following that first card and the GT 640 squeezed in there too.

Now NVIDIA are ready to launch their latest 600 series GPU, the GTX 660 Ti and we have three factory overclocked models on our test bench today. First up is the EVGA SuperClocked, then the Palit JetStream and finally the Zotac AMP! We will put each up against overclocked versions of the GTX 670, 7950, 7870 and 560 Ti (448) in a selection of real world gaming tests including Max Payne 3 and Battlefield 3 to see where the GTX 660 Ti fits in.

First though, a little refresher on the NVIDIA 600 Series.


The GeForce GTX 690 / Kepler Overview

One of the key design principles when designing Kepler was "Faster" and to enable this NVIDIA have developed what they call an "Extreme SM architecture" that contains (per 680 GPU) 1536 CUDA core which offer improved instruction throughput, texturing and geometry processing over previous GPUs.

Kepler Kepler

The GPU has its roots in GTX 480 which first used a parallel geometry pipeline and compute architecture (inc fast context switching). In Kepler, we have various hardware blocks which perform specific tasks with the GPC being the master high level hardware block with dedicated resource for rasterization, shading, texturing and compute.

Within the GPC we have the latest generation of Streaming Multiprocessors (named SMX) which have their performance enhanced over Fermi based equivalents while running on less power (NOTE: See how this affects power consumption and why later in the review). SMX are the components which power our games using their CUDA cores to handle pixel/vertex/geometry shading and physics/compute operations. Texture units deal with the filtering, load/store units fetch and save information and the PolyMorph Engine looks after vertex fetch, tessellation, viewport transform, attribute setup and stream output. Also included are Special Function Units (SFUs) for transcendental and graphics interpolation instructions.

Kepler

Connecting the core to its memory is a new memory interface. NVIDIA have reworked the memory subsystem to maximise the memory clock possible and therefore the bandwidth with rated speed of 6Gbps quoted. Elsewhere we have a new hardware based H.264 encoder (NVENC) which takes the video processing load away from the CUDA cores, enhancing performance and reducing power consumption.

Another area that comes under the "Faster" design ethic is NVIDIAs new GPU Boost technology. The basic idea behind this is that the GTX 660-690 has real time hardware monitoring that varies the clock speed of the core in small increments depending on load. This is completely automatic and not dependant on software and is similar to the speed step technology we have seen in desktop CPUs for some time, though to a much finer level of available speeds…less than 10MHz increments. The core speed doesn’t just scale down when at idle or low load though, when required it also "boosts" up with the default speed often rated as over 1000MHz (This is an average, often peaking higher while remaining within the defined power range for the card). This has a major (positive) impact on power use, overclocking, temperatures and essentially the day to day workings of our card so we recommend visiting Page 17 of this review for detailed information and examples of how it works.

Multi-screen demonstration

The significant changes brought to market by NVIDIA with the GTX 660-690 and its R300 drivers continue with three key technologies. First up is FXAA in all games, we have seen FXAA (smoother edges, smaller performance impact than MSAA) used in select games before now however from today we can enable the technology in the driver and that will be covered later in this review. Next up is surround gaming from one card. With the GTX 660-690 NVIDIA now allow us to connect three displays to one card/GPU and power resolutions such as 5760×1080 and while doing so we can also enable 3D Vision. As an added extra NVIDIA also allow the use of an "accessory" display, a fourth screen which can run at the same time as our three gaming screens for use on software such as chat, mail and browsing applications.

Next up is Adaptive VSync which looks to solve issues commonly associated with traditional V-Sync on/off setups. On past products users generally had to choose between V-Sync "on" which impacted framerates or V-Sync "off" which gave them the full speed of the card but with the introduction of image tearing. Adaptive VSync disables VSync when framerates are below 60fps, reducing stutters and when they return to over 60fps it is enabled again to reduce tearing.

And finally we have TXAA… a new mode of anti-aliasing which we will cover later in the article…

Leave a Reply

Related posts

Sapphire R9-290X 8gb Vapor-X OC Review

Sapphire R9-290X 8gb Vapor-X OC Review

Sapphire R9-290X 8gb Vapor-X OC Review

Zotac GTX 980 AMP! Extreme Edition Review

Zotac GTX 980 AMP! Extreme Edition Review

Zotac take the GTX 980 to a new level...

MSI GTX 980 Review (Twin Frozr V OC / Gaming 4G)

MSI GTX 980 Review (Twin Frozr V OC / Gaming 4G)

Today we get our first look at a custom GTX 980 in our MSI GTX 980 Review which features their hybrid/silent cooler and an overclocked spec.