Cooler Master Silencio 652S Case Review with Seidon 120v Cooler
Cooler Master Silencio 652S Review
inc Seidon 120v Cooler / G650M PSU
Last year Cooler Master launched a new model in their Silencio range, the 652, designed to offer low noise operation with plenty of flexibility in terms of component choice. Recently Cooler Master announced a refresh of the 652, the 652S which changes the fan configuration for even quieter operation. Today we take a look at that very case, along with Cooler Masters Seidon 120v cooler.
Packaging and Bundle
Cooler Master package their Silencio 652s in a large box which has a decent image of the case on the front with other key feature information on various sides. Upon opening the box we find the case wrapped in a protective plastic bag and suspended in foam. Bundled with the case are a selection of screws, mounts, etc and the instruction manual. Also shown above is the inside of the case doors which have sound dampening material applied.
Before we look at the case itself, let’s take a quick glance at a couple of components we will install in it today.
First up is our PSU, a G650M unit from Cooler Master which measures 150x140x86mm. This is a semi modular unit which is 80 Plus Bronze certified. It contains a 12cm fan which runs at a low RPM until 50% load and then climbs slowly past that. We also get over voltage, power, temperature and current protection along with short circuit protection and the 12v rail is capable of providing 52A.
For cooling we have the Seidon 120v, a new model in Cooler Masters range. The Seidon 120v arrived in a much plainer package than the Silencio and is bundled with all the brackets/items we need for all current AMD/Intel systems. Also present is a rifle bearing 120x120x25mm fan (2400RPM max 40dBA). The 120v uses a 12cm aluminium radiator (154x119x27mm) which connects via two pipes to our CPU block which features a blue LED on top. This block contains the pump which cycles the coolant round our cooler and to aid performance it has a copper base with microchannel design.
The Silencio 652S
Shown above is the Silencio 652S and those familiar with the original 652 will see no differences here. It is essentially the same design externally and internally (508.6x220x507mm). The front surface is a door which opens to reveal our three optical drive bays, sound dampening material and a quick release vent which highlights a change in this model. Instead of a single 180mm fan we have two 1200RPM, 12cm Silencio models. These have lower power use than standard fans (0.6w/12v/0.05A) and feature IP6X standard dust protection. Rated for 11dBA they feature oversize fan blades and a motor which uses loop dynamic bearing technology all of which combines to give them a lifespan of 160,000 hours.
Looking up to the top of the case we find a stylish glossy trim and our various case connectors. These are 2xUSB 2.0, 2xUSB 3.0, 3.5mm audio in/out and an SD card reader. Also worthy of note is that the top section can be removed revealing a perforated, dust filtered area designed to be the top when a radiator is used in this location (120-240 size supported). This radiator compatibility is also replicated in the front fan location.
Turning round to the back of the case we find a layout which features 7 standard expansion slots with an additional slot to the side. Beside our I/O shield location is a 12cm exhaust and beneath that are rubber lined holes for watercooling tubes.
Flipping the case up on its front we find that the base has two dust filtered intakes and four rubber feet.
To access the inside of the Silencio 652S we remove two thumbscrews from each panel (The left side supports 180/200mm fan) and we can see the reasonably spacious chamber inside which supports mATX and ATX boards. The 652S can accommodate CPU coolers up to 168mm and graphics cards of 423mm and we have all the usual design aspects such as CPU backplate cut out and rubber lined wiring holes.
Down at the bottom left corner of the case is our PSU mount with rubber pads to minimise vibrations between the PSU and case. Looking up the back we find a 12cm fan, identical to the models used on the front and like those it features 4pin to Molex convertors so that we can connect to our motherboard or PSU directly. The optical bays are tool free, like the PCIe slots. Beneath them are four 2.5″ drive bays with expandable caddy and side wall which means we can convert to 3.5″ size. Beneath those four bays are another 3 3.5″ bays with options to install more drives behind the motherboard tray, in the optical bay and at the base of the case. That means that in total we can install 9 3.5″ drives or 10 2.5″. Counting up the fan locations we can fit:
Top: 180/200mm fan x 1, or 120/140mm fan x 2
Front: 120mm Silencio FP 120 fan x 2 (installed; 11±1 dBA, 1200±200 RPM)
Rear: 120mm Silencio FP 120 fan x 1 (installed; 11±1 dBA, 1200±200 RPM)
Side: 180/200mm fan x 1
Bottom: 120/180mm fan x 1
HDD cage: 120mm fan x 1
We start our install by adding in our motherboard stand-offs using the bundled tool to make it as easy as possible. Next we add our motherboard and PSU with plenty of room available. Our SSD screws into the caddy, as do 3.5″ drives and then we begin to think about the 120v cooler install. Cooler Master use a universal bracket for that and we use it to pass four screws through the motherboard. It is worth mentioning that this is a large bracket and despite their being a CPU plate cut-out on the Silencio it wasn’t big enough to fit the plate without issue here. This means that some may find it easier to do this part of the install outside the case.
Next we add our thermal paste and screw the fan/radiator into our case (8 screws total) before securing the CPU block to our backplate screws with four bolts. Next we connect the fan/pump power to our motherboard and the cooler is in place. Finally we add in our GPU and wire the case appropriately.
Notable Test Components:
ASUS/AMD FM2 board/A10-6700 Series APU, AMD/Gigabyte Radeon R9-280X GPU.
Starting with the build quality of the Silencio 652S we have a product which feels very sturdy. The steel construction is well put together and each of the plastic sections are of a high standard. Elsewhere there are a lot of nice touches like the easily removable filters, sound proofing material and even that dual top which allows us to switch between maximum airflow and minimal noise with ease. We also get those unique drive bays with their expanding drive holders and plenty of flexibility in terms of the components which can be fitted inside from 10 storage devices to three main radiator locations. That said, given that the entire point of this model is the low noise fans anyone who replaces them is missing the point so they should probably be used with any radiator we install rather than alternate models.
Turning to the Seidon 120v for a moment that too feels well built. We prefer rubber tubing rather than the harder material used here but that is a minor design issue rather than anything significant. The install is decent though and while a more compact CPU brand specific backplate would be ideal the overall install was quick/simple. In terms of performance the Seidon and Silencio combined well to keep our components cool and with minimal RPM all round. This of course resulted in a lower noise build which was enhanced by the foam layer within the case.
That brings us to value where the Silencio 652S retails for around £80-90 and the Seidon 120v for £35. For the latter that is a very attractive price for an all in one liquid cooler and wins it our value award. For the 652S we have a well-built case with plenty of flexibility and no significant issues in terms of design. That mixed with the very low noise Silencio FP 120 fans wins it our recommended award.