DirectSound issue

HumanRes · Aug 4, 2003, 06:57 PM

The UT issue is still there with the 3534 driver (org. post: http://www.hardwareheaven.com/showthre...&postid=175889)

But i checked dxdiag now and found out that the last 4 directsound-tests only play on the right channel. I tested 0/1 and 4/5 with the same result - tried different hardware accellerations and kx-mixer speaker setups. DSP-Reinit didn't help either. Normally i use 5.1 copy mode, so i can hear the output on the headphones and via line out.

Can someone else confirm the dxdiag issue?

SBLive 1024 Value on WinXP
----Hardware / Software configuration---------------
Treiber Name:kX Audio Driver (Debug)
Treiber Datum: Aug 2 2003 22:07:58
Treiber Version: 5.10.00.3534 - debug
DB Name:none
CT4832 10k1 [d400]
PCI Information:
Device: 21102 Subsys: 80271102 ChipRev: 8
Card has MPU device
Card HAS AC97 codec
Codec name: Unknown AC97 codec [43525914
3D Extension: Crystal Semi 3D Stereo Enhancement
Codec is 2.0 compliant
Capabilities[1990] : -headphone out-
DAC resolutions : -16-bit- -20-bit-
ADC resolutions : -16-bit- -18-bit-
Ext Capabilities [200]: -slot/DAC mappings-
Port: d400 Irq: 11
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
GSIF buffer: 512 samples
OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148]
----------------------------------------------------

rii · Aug 5, 2003, 10:09 AM

Yes, I confirm the dxdiag issue with 3534 driver.
And with 3533b this problem not exist.

XP SP1, CT4832.

**Eugene Gavrilov** · Aug 5, 2003, 09:06 PM

confirmed
I'll try to investigate the problem soon

/Eugene

**Eugene Gavrilov** · Aug 5, 2003, 09:15 PM

btw, in 'copy' mode you don't hear the 'rear' speakers at all

/E

Aug 4, 2003, 06:57 PM	#1
HumanRes DriverHeaven Junior Member Join Date: Mar 2003 Location: Germany / Duesseldorf Posts: 26 Rep Power: 0	DirectSound DxDiag issue The UT issue is still there with the 3534 driver (org. post: http://www.hardwareheaven.com/showthre...&postid=175889) But i checked dxdiag now and found out that the last 4 directsound-tests only play on the right channel. I tested 0/1 and 4/5 with the same result - tried different hardware accellerations and kx-mixer speaker setups. DSP-Reinit didn't help either. Normally i use 5.1 copy mode, so i can hear the output on the headphones and via line out. Can someone else confirm the dxdiag issue? SBLive 1024 Value on WinXP ----Hardware / Software configuration--------------- Treiber Name:kX Audio Driver (Debug) Treiber Datum: Aug 2 2003 22:07:58 Treiber Version: 5.10.00.3534 - debug DB Name:none CT4832 10k1 [d400] PCI Information: Device: 21102 Subsys: 80271102 ChipRev: 8 Card has MPU device Card HAS AC97 codec Codec name: Unknown AC97 codec [43525914 3D Extension: Crystal Semi 3D Stereo Enhancement Codec is 2.0 compliant Capabilities[1990] : -headphone out- DAC resolutions : -16-bit- -20-bit- ADC resolutions : -16-bit- -18-bit- Ext Capabilities [200]: -slot/DAC mappings- Port: d400 Irq: 11 Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb GSIF buffer: 512 samples OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148] ---------------------------------------------------- Last edited by HumanRes; Aug 4, 2003 at 07:11 PM.

Aug 5, 2003, 10:09 AM	#2
rii DriverHeaven Newbie Join Date: Jun 2003 Posts: 5 Rep Power: 0	Yes, I confirm the dxdiag issue with 3534 driver. And with 3533b this problem not exist. XP SP1, CT4832.

Aug 5, 2003, 09:06 PM	#3
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	confirmed I'll try to investigate the problem soon /Eugene

Aug 5, 2003, 09:15 PM	#4
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	btw, in 'copy' mode you don't hear the 'rear' speakers at all /E