|
|||||||
| 3-D Audio kX 3-D Audio, DirectSound 3D, OpenAL and EAX discussion |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Newbie
Join Date: Feb 2006
Posts: 1
Rep Power: 0 ![]() |
Hi,
i got a Problem with my SoundBlaster Live!. I use the KX-project driver (Version 3538g) and have a problem with EAX support in Counterstrike. When I turn on EAX support in cs everything seems perfect, but the sound thats 3-dimensionally seen coming from behind me (rear sound) sounds bassless. It sounds as if I hadn't installed a sound driver, that means without bass and it's very quite. The sound thats coming from the front and the side is perfectly ok, but the sound from behind me sounds like trash. I have also tried it with the original Creative drivers but then it's the other way around, the sound coming from the front has no bass and sounds like no driver was installed and the sound coming from the back is way too loud and the bass is so uncomfortably intensive that its hard to play this way longer than 10 minutes ... Hope u can help me. P.S.: The Headset with which I play is the Speedlink Medusa 5.1 Headset. |
|
|
|
|
|
#2 |
|
Tail Razer
Join Date: Jun 2005
Location: Bernyurass, AZ - USA
Posts: 4,027
Rep Power: 50 ![]() ![]() |
KX doesnt support EAX
If possible - set CS to use 'Aureal' - and install the Aureal A2D Engine - found in Start menu/KX Audio Driver. It works well in games that support that. (UT2003, NWN) |
|
|
|
|
|
#3 | |
|
DriverHeaven Newbie
Join Date: Apr 2006
Posts: 3
Rep Power: 0 ![]() |
Quote:
With a SB A2 it would seem that would be plenty even using the normal drivers that come from creative labs. |
|
|
|
|
|
|
#4 | |
|
Tail Razer
Join Date: Jun 2005
Location: Bernyurass, AZ - USA
Posts: 4,027
Rep Power: 50 ![]() ![]() |
Quote:
A2D works with 1 card (not sure how one would go about 'forcing' the use of 2 cards in any game. - Most use 1 sound card driver only AFAIK. |
|
|
|
|
|
|
#5 |
|
DriverHeaven Newbie
Join Date: Apr 2006
Posts: 1
Rep Power: 0 ![]() |
MARCMARC: SB Live! had issues with front and rear outputs being out of phase on many models. The rear output has the phase inverted, which causes the apparent lack of bass. The problem happens at different outputs depending on the driver you use because Kx is by default re-routing the front to the rear outputs, just because these had better sound quality. (http://kxproject.lugosoft.com/rear.php?language=en)
About the bass problem check out this link: http://kb.kxproject.lugosoft.com/guide/setup-bass.html Cheers! |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|