HOW TO: Get Theater 200 TV/Composite/S-Video inputs working in Vista

clicknext · Nov 5, 2006, 11:25 PM

I have spent a lot of hours trying to find a way to make my card work with the AIW features under Vista so I that I wouldn't have to junk it and buy a Hauppauge, and it finally paid off! I thought I would share the solution that worked for me so that hopefully it will help someone else get theirs to work.

Previously, the media chip would always display as ntativrv01, as most of you know. Even when I managed to install the driver for the device, whenever I tried to use any capture program, it would say unable to add capture graph, yada yada yada.

This solution has been done on the following system:
ATI All In Wonder Radeon 9600 Pro
Windows Vista RC2
Catalyst Display Driver 8.31.100
AV Stream (T200) Driver Version 6.14.10.1071
AMCap 9.00 used as capture program

STEP 1: Install the regular Catalyst drivers

Install the latest Catalyst driver package from the ATI website. At this time, it does not include the capture drivers

STEP 2: Install the AVStream driver

Find a copy of the old ATI Vista RC0 drivers, filename ati_LH_RC0_32.exe.-Double click on the driver to start the installation.
It will ask you where you want to install the files; pick a place. Here I picked the default C:\ATI\SUPPORT\ati_LH_RC0
After it copies the files over, and starts the Catalyst installation screen, cancel the installation
Go to the device manager, right click the ntativrv01 device, and select "Update Driver Software..."
Click browse my computer
Tell it to search in the directory where you put the install files, for me it was C:\ATI\SUPPORT\ati_LH_RC0. Make sure "include subfolders" is checked
It will install the drivers automatically from there
Restart your computer

STEP 3: Install AMCap

Install AMCap. I used a copy of AMCap I had that came with a webcam because the one you can download off the internet only works for 20 minutes. Another capture program might also work, but I havn't tried anything else other than Windows Media Capture 9 (which also works to some degree).
Create a shortcut to it
Right click the shortcut and go to properties
Click on the compatibility tab
Check "Run this program as an administrator"
Click OK, and run the program from the shortcut
Make sure in "Devices" the ATI T200 device is checked
Make sure in "Options", "Preview" is checked
Well there, you're done and hopefully it works.

STEP 4: AMCap details

Most of the features you'll want are in the Options menu
Video Input lets you select composite/S-video
Video Capture Pin lets you set the resolution of the signal to display (720x480 is the correct one on mine)
TV Tuner lets you select TV channels

Well hopefully this solution will also work for someone else. If you need the T200 driver, I've posted a link to it below, but it'll probably expire in a short time... I can send it to you via e-mail, but it would be nice if someone could host it. The portion you really need is only 400kb; too bad this forum doesn't support file attachments.

H3X4D3C1M4L · Nov 6, 2006, 04:23 PM

Why not use one of those sites like SendIt to send the file?

clicknext · Nov 7, 2006, 06:44 AM

http://download.yousendit.com/5A01AC0453EAADB5

Here it is.

sonicice · Nov 8, 2006, 01:37 PM

Hey, this worked for me, thanks!

Daenks · Nov 8, 2006, 06:43 PM

After i install the T200 driver, i get a code 10 (the device cannot start).

Vista RC2
AIW Radeon 9600 Pro

Also, vista doesn't recognize my AIW as a 3d card, so i cant use Aero without hacking the registry, any experience there?

H3X4D3C1M4L · Nov 9, 2006, 10:50 PM

Quote:

Originally Posted by Daenks

After i install the T200 driver, i get a code 10 (the device cannot start).

Vista RC2
AIW Radeon 9600 Pro

Also, vista doesn't recognize my AIW as a 3d card, so i cant use Aero without hacking the registry, any experience there?

Use Google for that Aero stuff its all there I believe

Daenks · Nov 10, 2006, 12:52 AM

Yea i got Aero working, but not the TV input, thats the important part :^)

H3X4D3C1M4L · Nov 11, 2006, 06:19 AM

Quote:

Originally Posted by Daenks

Yea i got Aero working, but not the TV input, thats the important part :^)

Well that's what the original post was about

Try posting in the Vista forum, I don't think anyone here has cared to bother with the card in Vista considering the nature of the beat in XP

marceloM · Nov 27, 2006, 02:23 PM

Quote:

Originally Posted by clicknext

http://download.yousendit.com/5A01AC0453EAADB5

Here it is.

Could you upload it again?

H3X4D3C1M4L · Nov 30, 2006, 10:49 PM

Quote:

Originally Posted by marceloM

Could you upload it again?

Just get him to email it to you via PM

marceloM · Dec 3, 2006, 02:18 PM

Hi guys.

I found this drivers.

http://www.station-drivers.com/telechargement/ati/ati%20catalyst%206.12%20(8.32)%20beta-2k-xp-32-64.exe

I found these drivers
I have not managed to make them work correctly

can anyone check it?

H3X4D3C1M4L · Dec 4, 2006, 09:11 PM

I don't like the look of that website... why not just download it directly from AMD's website?

marceloM · Dec 5, 2006, 01:50 AM

Quote:

Originally Posted by H3X4D3C1M4L

I don't like the look of that website... why not just download it directly from AMD's website?

I usually got drivers before the official launch.

In this case, there aren't any complete drivers from ATI's website.

H3X4D3C1M4L · Dec 5, 2006, 06:32 PM

Quote:

Originally Posted by marceloM

I usually got drivers before the official launch.

In this case, there aren't any complete drivers from ATI's website.

http://ati.amd.com/support/drivers/v...n-vista32.html

?

marceloM · Dec 6, 2006, 12:06 AM

As you can See:

Catalyst BETA Drivers
Version: 8.31.100
Posted: Nov. 2, 2006
WDM: no

Station Drivers option:
Version: 8.32
Posted: Nov. 30, 2006
WDM: yes

PatricioL · Dec 6, 2006, 12:26 AM

Anybody could please provide the ati_LHLRC0_32.exe driver to me?

I looked for it over the whole internet and couldnt find it

Thanks

H3X4D3C1M4L · Dec 6, 2006, 08:40 PM

Quote:

Originally Posted by marceloM

As you can See:

Catalyst BETA Drivers
Version: 8.31.100
Posted: Nov. 2, 2006
WDM: no

Station Drivers option:
Version: 8.32
Posted: Nov. 30, 2006
WDM: yes

Then where did they get it if AMD doesn't provide one?

Seems suspicious to me. Its most likely a rebadged XP driver.

marceloM · Dec 7, 2006, 12:19 AM

Don't worry be happy.

H3X4D3C1M4L · Dec 7, 2006, 06:39 PM

Quote:

Originally Posted by marceloM

Don't worry be happy.

Doesn't worry my in the least

anhnguyen · Dec 8, 2006, 09:45 AM

I just got my AIW X600 Pro works in my Vista Final built 6000 eventually.
Here is what I done. I Installed driver from ati.amd.com version 8.31.100 (I do not install Control Center) and then installed T200 driver (built 1071 with WHQL) from file ati_LH_RC0_32.exe. I am using AMCap and it works fine now.
The newest version for T200 is built 1075 that needs modify .inf file (loose WHQL) before install but I could not get it works. It just shows a green screen in Vista but it works fine in XP.
IMO, T200 should work in Vista if the driver is WHQL certified but will not work with Vista Media Center.

AVS_T200 driver built 1071 for Vista
http://r-hardwares.com/files/avs_t200.zip

marceloM · Dec 8, 2006, 07:16 PM

Thx device recognized

Next step, AmCap.

Just a question: can't you get more than 1024x768?

marceloM · Dec 8, 2006, 10:47 PM

BTW

Windows Media Center don't recognized the card

H3X4D3C1M4L · Dec 10, 2006, 05:24 PM

Quote:

Originally Posted by marceloM

BTW

Windows Media Center don't recognized the card

Use the XP drivers for WMC... its basically XP with a frontend video app anyway

marceloM · Dec 11, 2006, 01:45 AM

Quote:

Originally Posted by H3X4D3C1M4L

Use the XP drivers for WMC... its basically XP with a frontend video app anyway

You 're on a mistake

I´m not talking about Windows XP Media Center Edition,I´m talking about VISTA's Windows Media Center

H3X4D3C1M4L · Dec 12, 2006, 12:04 AM

Quote:

Originally Posted by marceloM

You 're on a mistake

I´m not talking about Windows XP Media Center Edition,I´m talking about VISTA's Windows Media Center

Say that then next time and I won't draw the wrong conclusion.

As it is, its what I suspected. That site you posted to download drivers from is just a site that has a modified INI file packed into the regular ATI Beta Vista drivers

marceloM · Dec 22, 2006, 11:13 PM

Must we wait till january to get drivers?

H3X4D3C1M4L · Dec 26, 2006, 07:31 PM

Quote:

Originally Posted by marceloM

Must we wait till january to get drivers?

If AMD says so then yes

Nov 5, 2006, 11:25 PM	#1
clicknext DriverHeaven Newbie Join Date: Dec 2002 Posts: 11 Rep Power: 0	HOW TO: Get Theater 200 TV/Composite/S-Video inputs working in Vista I have spent a lot of hours trying to find a way to make my card work with the AIW features under Vista so I that I wouldn't have to junk it and buy a Hauppauge, and it finally paid off! I thought I would share the solution that worked for me so that hopefully it will help someone else get theirs to work. Previously, the media chip would always display as ntativrv01, as most of you know. Even when I managed to install the driver for the device, whenever I tried to use any capture program, it would say unable to add capture graph, yada yada yada. This solution has been done on the following system: ATI All In Wonder Radeon 9600 Pro Windows Vista RC2 Catalyst Display Driver 8.31.100 AV Stream (T200) Driver Version 6.14.10.1071 AMCap 9.00 used as capture program STEP 1: Install the regular Catalyst drivers Install the latest Catalyst driver package from the ATI website. At this time, it does not include the capture drivers STEP 2: Install the AVStream driver Find a copy of the old ATI Vista RC0 drivers, filename ati_LH_RC0_32.exe.-Double click on the driver to start the installation. It will ask you where you want to install the files; pick a place. Here I picked the default C:\ATI\SUPPORT\ati_LH_RC0 After it copies the files over, and starts the Catalyst installation screen, cancel the installation Go to the device manager, right click the ntativrv01 device, and select "Update Driver Software..." Click browse my computer Tell it to search in the directory where you put the install files, for me it was C:\ATI\SUPPORT\ati_LH_RC0. Make sure "include subfolders" is checked It will install the drivers automatically from there Restart your computer STEP 3: Install AMCap Install AMCap. I used a copy of AMCap I had that came with a webcam because the one you can download off the internet only works for 20 minutes. Another capture program might also work, but I havn't tried anything else other than Windows Media Capture 9 (which also works to some degree). Create a shortcut to it Right click the shortcut and go to properties Click on the compatibility tab Check "Run this program as an administrator" Click OK, and run the program from the shortcut Make sure in "Devices" the ATI T200 device is checked Make sure in "Options", "Preview" is checked Well there, you're done and hopefully it works. STEP 4: AMCap details Most of the features you'll want are in the Options menu Video Input lets you select composite/S-video Video Capture Pin lets you set the resolution of the signal to display (720x480 is the correct one on mine) TV Tuner lets you select TV channels Well hopefully this solution will also work for someone else. If you need the T200 driver, I've posted a link to it below, but it'll probably expire in a short time... I can send it to you via e-mail, but it would be nice if someone could host it. The portion you really need is only 400kb; too bad this forum doesn't support file attachments. Last edited by clicknext; Nov 9, 2006 at 01:33 AM.

Dec 3, 2006, 02:18 PM	#11
marceloM DriverHeaven Junior Member Join Date: Jul 2002 Location: Buenos Aires Posts: 91 Rep Power: 0	Vista drivers Hi guys. I found this drivers. http://www.station-drivers.com/telechargement/ati/ati%20catalyst%206.12%20(8.32)%20beta-2k-xp-32-64.exe I found these drivers I have not managed to make them work correctly can anyone check it? __________________ Greetings from Buenos Aires Marcelo ASUS P5B Dx # Pentium Coroe 6300 # 1 Gb Mb RAM # ATI 1300 XL # WD 80 Gb # WD 250 Gb SATA2 # DVD Nec 3540a # Plextor 716 SATA # Iomega ZIP 100 Mb # Creative Sound Blaster Audigy 2ZS

Dec 6, 2006, 12:06 AM	#15
marceloM DriverHeaven Junior Member Join Date: Jul 2002 Location: Buenos Aires Posts: 91 Rep Power: 0	As you can See: Catalyst BETA Drivers Version: 8.31.100 Posted: Nov. 2, 2006 WDM: no Station Drivers option: Version: 8.32 Posted: Nov. 30, 2006 WDM: yes __________________ Greetings from Buenos Aires Marcelo ASUS P5B Dx # Pentium Coroe 6300 # 1 Gb Mb RAM # ATI 1300 XL # WD 80 Gb # WD 250 Gb SATA2 # DVD Nec 3540a # Plextor 716 SATA # Iomega ZIP 100 Mb # Creative Sound Blaster Audigy 2ZS

Dec 7, 2006, 12:19 AM	#18
marceloM DriverHeaven Junior Member Join Date: Jul 2002 Location: Buenos Aires Posts: 91 Rep Power: 0	Don't worry be happy. __________________ Greetings from Buenos Aires Marcelo ASUS P5B Dx # Pentium Coroe 6300 # 1 Gb Mb RAM # ATI 1300 XL # WD 80 Gb # WD 250 Gb SATA2 # DVD Nec 3540a # Plextor 716 SATA # Iomega ZIP 100 Mb # Creative Sound Blaster Audigy 2ZS

Dec 8, 2006, 09:45 AM	#20
anhnguyen DriverHeaven Newbie Join Date: Jun 2005 Posts: 7 Rep Power: 0	I just got my AIW X600 Pro works in my Vista Final built 6000 eventually. Here is what I done. I Installed driver from ati.amd.com version 8.31.100 (I do not install Control Center) and then installed T200 driver (built 1071 with WHQL) from file ati_LH_RC0_32.exe. I am using AMCap and it works fine now. The newest version for T200 is built 1075 that needs modify .inf file (loose WHQL) before install but I could not get it works. It just shows a green screen in Vista but it works fine in XP. IMO, T200 should work in Vista if the driver is WHQL certified but will not work with Vista Media Center. AVS_T200 driver built 1071 for Vista http://r-hardwares.com/files/avs_t200.zip Last edited by anhnguyen; Dec 8, 2006 at 10:00 AM.

Nov 6, 2006, 04:23 PM	#2
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	Why not use one of those sites like SendIt to send the file?

Nov 7, 2006, 06:44 AM	Thread Starter #3
clicknext DriverHeaven Newbie Join Date: Dec 2002 Posts: 11 Rep Power: 0	http://download.yousendit.com/5A01AC0453EAADB5 Here it is.

Nov 8, 2006, 01:37 PM	#4
sonicice DriverHeaven Newbie Join Date: Sep 2006 Posts: 2 Rep Power: 0	Hey, this worked for me, thanks!

Nov 8, 2006, 06:43 PM	#5
Daenks DriverHeaven Newbie Join Date: Nov 2006 Posts: 2 Rep Power: 0	After i install the T200 driver, i get a code 10 (the device cannot start). Vista RC2 AIW Radeon 9600 Pro Also, vista doesn't recognize my AIW as a 3d card, so i cant use Aero without hacking the registry, any experience there?

Nov 10, 2006, 12:52 AM	#7
Daenks DriverHeaven Newbie Join Date: Nov 2006 Posts: 2 Rep Power: 0	Yea i got Aero working, but not the TV input, thats the important part :^)

Dec 4, 2006, 09:11 PM	#12
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	I don't like the look of that website... why not just download it directly from AMD's website?

Dec 6, 2006, 12:26 AM	#16
PatricioL DriverHeaven Newbie Join Date: Dec 2006 Posts: 1 Rep Power: 0	Anybody could please provide the ati_LHLRC0_32.exe driver to me? I looked for it over the whole internet and couldnt find it Thanks

Dec 8, 2006, 07:16 PM	#21
marceloM DriverHeaven Junior Member Join Date: Jul 2002 Location: Buenos Aires Posts: 91 Rep Power: 0	Thx device recognized Next step, AmCap. Just a question: can't you get more than 1024x768? __________________ Greetings from Buenos Aires Marcelo ASUS P5B Dx # Pentium Coroe 6300 # 1 Gb Mb RAM # ATI 1300 XL # WD 80 Gb # WD 250 Gb SATA2 # DVD Nec 3540a # Plextor 716 SATA # Iomega ZIP 100 Mb # Creative Sound Blaster Audigy 2ZS

Dec 8, 2006, 10:47 PM	#22
marceloM DriverHeaven Junior Member Join Date: Jul 2002 Location: Buenos Aires Posts: 91 Rep Power: 0	BTW Windows Media Center don't recognized the card __________________ Greetings from Buenos Aires Marcelo ASUS P5B Dx # Pentium Coroe 6300 # 1 Gb Mb RAM # ATI 1300 XL # WD 80 Gb # WD 250 Gb SATA2 # DVD Nec 3540a # Plextor 716 SATA # Iomega ZIP 100 Mb # Creative Sound Blaster Audigy 2ZS

Dec 22, 2006, 11:13 PM	#26
marceloM DriverHeaven Junior Member Join Date: Jul 2002 Location: Buenos Aires Posts: 91 Rep Power: 0	Must we wait till january to get drivers? __________________ Greetings from Buenos Aires Marcelo ASUS P5B Dx # Pentium Coroe 6300 # 1 Gb Mb RAM # ATI 1300 XL # WD 80 Gb # WD 250 Gb SATA2 # DVD Nec 3540a # Plextor 716 SATA # Iomega ZIP 100 Mb # Creative Sound Blaster Audigy 2ZS