Ati MMC 9.06

M.A.S · May 15, 2006, 03:39 AM

Greetings,

I have a critical component missing in the installed MMC 9.06. The missing component is the Personal Video Recorder tab in the setup window. I can schedule the event, all looks well but no action takes place. Additionally the PVR icon on the TV control is missing as well. I installed all required software accoring to the Drivers Page on my ATI TV Wonder PCI Card. ANy sugestions, hints, comments are very appreciated.

I have all the system requirements met.

H3X4D3C1M4L · May 15, 2006, 09:24 PM

You'll need to go up to MMC 9.08 or better...

M.A.S · May 16, 2006, 12:31 PM

Quote:

Originally Posted by H3X4D3C1M4L

You'll need to go up to MMC 9.08 or better...

Thank you for the quick reply. It is greatly appreciated. I navigated through the ATI website and was unable to to find MMC 9.08. Can you provide the link for me. Sorry for the trouble.

I also suppose there is a specific way to uninstall MMC 9.06 before proceeding with the new install?

Thank you again.

Edit: Before going back to MMC 9.06 I had the lastest version of MMC but my problem was that the no signal message (apparently had to do with the free to air option) was constantly poping up and interfereing with viewing the tv and I could never remove that message.

H3X4D3C1M4L · May 16, 2006, 08:53 PM

Well if you're not adverse to 3rd party apps you might look at DScaler

M.A.S · May 17, 2006, 02:23 AM

Quote:

Originally Posted by H3X4D3C1M4L

Well if you're not adverse to 3rd party apps you might look at DScaler

No I am not adverse to other 3rd party apps, I was considering BeyondTV for instance before you brought this other product to my attention.

However there must be a link out there somewhere on the ATI website that has 9.08 or perhaps if you can help me address the problem I has with the latest MMC I was encountering. Can anyone confirm if MMC 9.06 has the PVR option (it mus). After all why did it not install from the link that I directly DL'ed from ATI.

M.A.S · May 17, 2006, 02:39 AM

In my quest to fix my giant annoyance I stumbled upon the following downloads after exhaustive scouring through the ATI website. I hope that this is not a repeat and that at least one other person finds it useful.

H3X4D3C1M4L · May 17, 2006, 08:22 PM

Well I said 9.08 or better.... so 9.13 would've worked

M.A.S · May 17, 2006, 11:00 PM

Quote:

Originally Posted by H3X4D3C1M4L

Well I said 9.08 or better.... so 9.13 would've worked

Yes, I read your point. However I went on to mention that 9.13 also gave me some issues. At any rate I thank you for your quick and immediate help, it is greatly appreciated. Additionally, I am going to look further into DScaler. I will begin by searching through the forums.

I am going to give the latest version a try before I go back to 9.08 as per your suggestion.

Thank you

H3X4D3C1M4L · May 18, 2006, 10:19 PM

Ooh right, my mistake

DScaler I'm pretty sure should work, it works way better for me in most cases.

ROBSCIX · May 22, 2006, 12:40 AM

You need the proper driver version to use with the MMC, as the drivers started using a unified driver so if you try and use a newer driver with a Older MMC..no go, same thing if you try and use a older driver and a newer MMC....Justa thought, I think that MMC and driver list should be stickied..

H3X4D3C1M4L · May 22, 2006, 08:15 PM

We have enough stickies going methinks

lewdvig · May 28, 2006, 11:55 PM

Quote:

Originally Posted by M.A.S

In my quest to fix my giant annoyance I stumbled upon the following downloads after exhaustive scouring through the ATI website. I hope that this is not a repeat and that at least one other person finds it useful.

wonderful thanks!

M.A.S · May 31, 2006, 07:05 PM

Quote:

Originally Posted by lewdvig

wonderful thanks!

You are welcome. As a new member the forum was nice to help me out and I tried to repay the community. Thank you for the appreciation.

OldBuzzard · Jun 1, 2006, 07:31 AM

Well, as I mentioned in another thread, I had an ATI Tech tell me that the CAT 6.2/MMC 9.06.1 combination is the 'best'.

This was about a week ago when I was having probs with my X800XT AIW and ended up RMAing it. This was the 2nd level guy that I got passed on to.

I'm going to give that combo a try when the card comes back.

H3X4D3C1M4L · Jun 2, 2006, 03:01 PM

That combo wasn't all that good for me and I have an AiW X800XT

May 15, 2006, 03:39 AM	#31
M.A.S DriverHeaven Newbie Join Date: May 2006 Location: Toronto, Ontario, Canada Posts: 6 Rep Power: 0	Desperately Looking for Assistance with MMC 9.06 Greetings, I have a critical component missing in the installed MMC 9.06. The missing component is the Personal Video Recorder tab in the setup window. I can schedule the event, all looks well but no action takes place. Additionally the PVR icon on the TV control is missing as well. I installed all required software accoring to the Drivers Page on my ATI TV Wonder PCI Card. ANy sugestions, hints, comments are very appreciated. I have all the system requirements met.

May 17, 2006, 02:39 AM	#36
M.A.S DriverHeaven Newbie Join Date: May 2006 Location: Toronto, Ontario, Canada Posts: 6 Rep Power: 0	I hope this helps at least one other person! In my quest to fix my giant annoyance I stumbled upon the following downloads after exhaustive scouring through the ATI website. I hope that this is not a repeat and that at least one other person finds it useful. ATI Multimedia Center 9.08 ATI Multimedia Center 9.06.1 ATI Multimedia Center 9.03 ATI Multimedia Center 9.06 ATI Multimedia Center 9.13 CATALYST 5.5 Windows XP - Driver Download CATALYST 5.1 Windows XP - Driver Download Catalyst 5.10 Windows XP - Driver Download Catalyst 5.11 Windows XP - Driver Download Catalyst 5.12 Windows XP - Driver Download Catalyst 5.13 Windows XP - Driver Download CATALYST 5.2 Windows XP - Driver Download CATALYST 5.3 Windows XP - Driver Download CATALYST 5.4 Windows XP - Driver Download CATALYST 5.6 Windows XP - Driver Download CATALYST 5.7 Windows XP - Driver Download CATALYST 5.8 Windows XP - Driver Download Catalyst 5.9 Windows XP - Driver Download Catalyst 6.1 Windows XP - Driver Download Catalyst 6.2 Windows XP - Driver Download Catalyst 6.3 Windows XP - Driver Download Catalyst 6.4 Windows XP - Driver Download RADEON Previous Windows XP Drivers and Software versions prior to CATALYST 5.1 / Multimedia Center 9.03

Jun 1, 2006, 07:31 AM	#44
OldBuzzard DH's oldest Geek Join Date: May 2003 Location: Oberlin, OH Posts: 2,781 Rep Power: 142 System Specs	Well, as I mentioned in another thread, I had an ATI Tech tell me that the CAT 6.2/MMC 9.06.1 combination is the 'best'. This was about a week ago when I was having probs with my X800XT AIW and ended up RMAing it. This was the 2nd level guy that I got passed on to. I'm going to give that combo a try when the card comes back. __________________ When looking for a reason as to why things go wrong, never rule out sheer STUPIDITY

May 15, 2006, 09:24 PM	#32
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	You'll need to go up to MMC 9.08 or better...

May 16, 2006, 08:53 PM	#34
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	Well if you're not adverse to 3rd party apps you might look at DScaler

May 17, 2006, 08:22 PM	#37
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	Well I said 9.08 or better.... so 9.13 would've worked

May 18, 2006, 10:19 PM	#39
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	Ooh right, my mistake DScaler I'm pretty sure should work, it works way better for me in most cases.

May 22, 2006, 12:40 AM	#40
ROBSCIX DriverHeaven Senior Member Join Date: Mar 2004 Posts: 1,732 Rep Power: 0	You need the proper driver version to use with the MMC, as the drivers started using a unified driver so if you try and use a newer driver with a Older MMC..no go, same thing if you try and use a older driver and a newer MMC....Justa thought, I think that MMC and driver list should be stickied..

May 22, 2006, 08:15 PM	#41
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	We have enough stickies going methinks

Jun 2, 2006, 03:01 PM	#45
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	That combo wasn't all that good for me and I have an AiW X800XT