I'm in a pickle here!

saverain · Jan 26, 2006, 07:36 PM

Hi, I'm new but been here before. I just got an All In Wonder 2006 and installed it and the driver update 6.1 catalyst but there is absolutely no sound. I have a Sound Blaster Live 24bit and the lastest drivers for that. I've checked all the cables, mutes and devices several times. All say that they are running correctly. I have the audio input from the AIW adapter hooked up to my sound card input and my speakers hooked into the output. Before I installed it everything sounded fine. The only sound that works is the motherboard sound.

I call ATI and they told me this never happens and told me to do somethings I told them I already did and they didn't really want to help me any further.

I would be greatful for some advice.

saverain · Jan 26, 2006, 07:53 PM

Here are my specs..

celeron 1.7ghz
> 300mb SDRAM RAM
Motherboard P4IBMS
AGP
On board audio AC97Codec
Chipset Intel 82845 & 82801BA
AIW 2006 256mb AGP
Sound Blaster Live 24bit

H3X4D3C1M4L · Jan 27, 2006, 03:44 AM

Are you sure you plugged the cables in all correctly?

Sounds to me like WDM_NSP strikes again

swimtech · Jan 28, 2006, 02:21 AM

You updated just the video driver, not the Multimedia Center software?

hacrowder · Nov 13, 2006, 08:38 PM

Have you gotten an answer on this. I have basically the same set up and get NO SOUND from the TV Player (ok, it's not no sound, but crackling). DVD works fine. ATI website is not informative, I've tried everything there (re-installed a number of times including cleaning out the registry). There is no "audio wizard" as the website suggest, and I'm unable to get tv audio. I do have the cables correct (checked them a number of times). If anyone has any info regarding some settings that I can change, please advise.

H3X4D3C1M4L · Nov 14, 2006, 05:27 PM

I think this might have been resolved with a later driver revision, there were some fixes and I believe the T200 drivers superceeded the WDM_NSP

Jan 26, 2006, 07:36 PM	#1
saverain DriverHeaven Newbie Join Date: Jan 2006 Posts: 3 Rep Power: 0	I'm in a pickle here! Hi, I'm new but been here before. I just got an All In Wonder 2006 and installed it and the driver update 6.1 catalyst but there is absolutely no sound. I have a Sound Blaster Live 24bit and the lastest drivers for that. I've checked all the cables, mutes and devices several times. All say that they are running correctly. I have the audio input from the AIW adapter hooked up to my sound card input and my speakers hooked into the output. Before I installed it everything sounded fine. The only sound that works is the motherboard sound. I call ATI and they told me this never happens and told me to do somethings I told them I already did and they didn't really want to help me any further. I would be greatful for some advice.

Jan 28, 2006, 02:21 AM	#4
swimtech HardwareHeaven Extreme Member Join Date: May 2002 Location: North Carolina Posts: 4,040 Rep Power: 124 System Specs	You updated just the video driver, not the Multimedia Center software? __________________ It's not so much getting your way that matters or not - what matters is how you go about getting it.

Jan 26, 2006, 07:53 PM	Thread Starter #2
saverain DriverHeaven Newbie Join Date: Jan 2006 Posts: 3 Rep Power: 0	Here are my specs.. celeron 1.7ghz > 300mb SDRAM RAM Motherboard P4IBMS AGP On board audio AC97Codec Chipset Intel 82845 & 82801BA AIW 2006 256mb AGP Sound Blaster Live 24bit

Jan 27, 2006, 03:44 AM	#3
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	Are you sure you plugged the cables in all correctly? Sounds to me like WDM_NSP strikes again

Nov 13, 2006, 08:38 PM	#5
hacrowder DriverHeaven Newbie Join Date: Nov 2006 Posts: 1 Rep Power: 0	Have you gotten an answer on this. I have basically the same set up and get NO SOUND from the TV Player (ok, it's not no sound, but crackling). DVD works fine. ATI website is not informative, I've tried everything there (re-installed a number of times including cleaning out the registry). There is no "audio wizard" as the website suggest, and I'm unable to get tv audio. I do have the cables correct (checked them a number of times). If anyone has any info regarding some settings that I can change, please advise.

Nov 14, 2006, 05:27 PM	#6
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	I think this might have been resolved with a later driver revision, there were some fixes and I believe the T200 drivers superceeded the WDM_NSP