ATI AGP Video Card Problems?

Judas · Dec 29, 2007, 08:47 AM

I've recently setup 2 machines.. one with a SIS chipset and the other with a Via chipset..

Both of which have the 7.12's working without a single glitch or hitch thus far..

X800XL AIW and a radeon 9550

Bajtman · Dec 29, 2007, 11:20 AM

PCI\VEN_1002&DEV_71C1&SUBSYS_02101043&REV_9E
PCI\VEN_1002&DEV_71C1&SUBSYS_02101043
PCI\VEN_1002&DEV_71C1&CC_030000
PCI\VEN_1002&DEV_71C1&CC_0300
ASUS AX1650PRO AGP DDR2 256MB 600/800. Official ATI Catalyst 7.12 drivers do not work with this 'video card',
same as 7.10, 7.9, 7.8, 7.7, 7.6, 7.5 ...and asus stop updated driver on
version cat. 7.1(8.33)(X-G Warcats 7.4 is the lat driver working with this card).

Bart1987 · Dec 29, 2007, 11:31 AM

Quote:

Originally Posted by Judas

I've recently setup 2 machines.. one with a SIS chipset and the other with a Via chipset..

Both of which have the 7.12's working without a single glitch or hitch thus far..

X800XL AIW and a radeon 9550

It started for me by first installing one of the drivers that didn't work, like the 7.7, 7.8 and after that the other drivers wouldn't install properly anymore

djgoan · Dec 29, 2007, 12:33 PM

as i understand the problem now is only with nforce2 chipset...and ofc i have that.....have tested all old ati and omega drivers...none of them works....the one i got from shappires homepage gives me 3d problem...otherwise it works.....have put my old nvidia gf4800se card back and it works perfect after finding some old drivers.......ati/shappire go f yourselfs

blackdog · Dec 29, 2007, 04:23 PM

PCI\VEN_1002&DEV_554D&SUBSYS_03021002&REV_00
PCI\VEN_1002&DEV_554D&SUBSYS_03021002
PCI\VEN_1002&DEV_554D&CC_030000
PCI\VEN_1002&DEV_554D&CC_0300

ATI X800XL 256mb
Latest Omega drivers (Cat 7.10 version) work like a charm, any Catylyst above 7.8 don't work especially D3D.
This card runs on my old Athlon XP 3200 with A7N8X-E(nforce-2) board, 2gb pc3200 ram. Old system but still provides decent (non sm 3) gaming for my kids

crazyquay · Dec 30, 2007, 04:31 PM

I've recently installed this video card on an Asus A8V Deluxe mobo. Lots of blank screens, crashes and spontaneous reboots when running in 3D. Tried various driver versions and nothing helped including the VisionTek recommended 7.7 drivers.

When looking over the AGP settings in BIOS, I noticed that both AGP 3.0 Calibration Cycle and DBI Output for AGP Trans were enabled. Defaults for these are disabled, but I had changed them for BIOS optimization when the AGP card installed at the time was an ATI 9600XT.

That did the trick.... very stable in 3D now. I suspect the AGP 3.0 Calibration Cycle is the only option that needed to be disabled but I haven't tested any further.

If any of you with X1950 cards and A8Vs are having problems, check your BIOS settings - maybe you'll get lucky.

jandarsun8 · Jan 2, 2008, 04:49 AM

PCI\VEN_1002&DEV_7280&SUBSYS_E190174B&REV_9A
PCI\VEN_1002&DEV_7280&SUBSYS_E190174B
PCI\VEN_1002&DEV_7280&CC_030000
PCI\VEN_1002&DEV_7280&CC_0300

Sapphire X1950 Pro 512 Meg AGP card.

PCI\VEN_1002&DEV_4B4B&SUBSYS_03121002&REV_00
PCI\VEN_1002&DEV_4B4B&SUBSYS_03121002
PCI\VEN_1002&DEV_4B4B&CC_030000
PCI\VEN_1002&DEV_4B4B&CC_0300

ATI X850 Pro 256 Meg AGP card in spare box.

The Sapphire card has worked with all of the Cat drivers (haven't tried 7.12 yet) however I use the Omega drivers because they are less bloated.

ATI's own X850 Pro is a different story all together. ATI's drivers have not worked since version 7.0. The drivers install fine how ever launching any game on it will not work. Continues to come up with a "No Direct 3D device installed" error. I have no choice other then the Omega drivers in order to game on it using that box.

The specs for the machine that the X850 is:
Asrock K7VT4A Pro with a VIA KT600 chipset
AMD Sempron 2800+
2 gig ram
ATI X850 Pro agp card
X-Gamers 5.1 sound card

Games that have not worked unless using the Omega drivers.
CoD 2
WoW
Splinter Cell (any of them)
Rainbow Six 3: Raven Shield or Athena Sword
Thief 3
MoH: Pacific Assault

I have not tested any other games out of frustration and since using the Omega drivers it's worked fine so haven't wanted to go back to test it.

Blad31k · Jan 6, 2008, 02:02 AM

PCI\VEN_1002&DEV_7244&SUBSYS_317218BC&REV_00
PCI\VEN_1002&DEV_7244&SUBSYS_317218BC
PCI\VEN_1002&DEV_7244&CC_030000
PCI\VEN_1002&DEV_7244&CC_0300

Im still unable to play Crysis and the same with Need for Speed: Most Wanted. Each time i try to run these 2 games the artifacts and these weird lines that taper down obscure my view and rendering me to be able to play the game.

I also play Guild Wars and Rome:Total War and i seem to have no problems with these 2 game as i think it is due to the graphics are less demanding. I've tried so much and many different drivers and still no look its so frustrating. I have posted about a month back now and you can see in more detail on page 2 of my post.

There must be a solution to this im sure its down to ATI drivers, please if any one can resolve this it would be highly appreciated.

Thank you for you time.

thegave · Jan 10, 2008, 10:10 PM

Quote:

Originally Posted by jandarsun8

The Sapphire card has worked with all of the Cat drivers (haven't tried 7.12 yet) however I use the Omega drivers because they are less bloated.

please let us know when you've tried the omegas based on 7.12 with the sapphire x1950pro as i'm getting that exact card.

thanks

Judas · Jan 11, 2008, 12:09 AM

OK

i think i'm having isolated cases of success with agp cards...

I've now tried these cards in various combinations with these chipsets:

ATI radeon 9500
ATI radeon 9550se
ATI radeon 9700pro
ATI radeon 9800pro
ATI Radeon x800
ati radeon x800xl AIW
ATI radeon x1950pro

everythin except the 9550se is built by ATI

Chipsets:

Via KM400
Via KT400
Via KT400a
Via KT600
Intel (various) 478 socket
Nvidia nforce 2 ulta
SiS 6xx through to 7xx series

So far, i've used 7.9's through to the 7.12's with no case of issues thus far....

Bart1987 · Jan 11, 2008, 09:16 AM

I haven't had any problems since I reinstalled my pc, I'm using cat 7.12 right now

Dyre Straits · Jan 11, 2008, 09:20 AM

Quote:

Originally Posted by Bart1987

I haven't had any problems since I reinstalled my pc, I'm using cat 7.12 right now

Did you install straightaway to the 7.12s without trying any previous versions?

brack · Jan 13, 2008, 04:40 AM

PCI\VEN_1002&DEV_9587&SUBSYS_00281002&REV_00
PCI\VEN_1002&DEV_9587&SUBSYS_00281002
PCI\VEN_1002&DEV_9587&CC_030000
PCI\VEN_1002&DEV_9587&CC_0300

Sapphire HD 2600 Pro 512 Meg DDR2 AGP card

Omega 3.8.442 Driver (ATI 7.12 I could not install - when run could not find device)

Windows XP Home Edition - Pentium (R) 4 CPU 2.8 GHz, 2.81 GHz, 2.0 GB Ram

Satan2k · Jan 14, 2008, 12:13 AM

i got exactly the same card and the same issues with the catalyst installer

Using now the omega drivers

Its working pretty well

thegave · Jan 15, 2008, 06:31 PM

Weird double post.

Can be deleted.

thegave · Jan 15, 2008, 06:32 PM

PCI\VEN_1002&DEV_7280&SUBSYS_E190174B&REV_9A
PCI\VEN_1002&DEV_7280&SUBSYS_E190174B
PCI\VEN+1002&DEV_7280&CC_030000
PCI\VEN_1002&DEV_7280&CC_0300

Sapphire ATi Radeon X1950Pro 512mb DDR3

Windows XP Professional

Omega Catalyst 4.8.442 (Cat 7.12)

Everything working fine so far.

crack1up · Jan 15, 2008, 08:53 PM

PCI\VEN_1002&DEV_71C2&SUBSYS_030B1002&REV_00
PCI\VEN_1002&DEV_71C2&SUBSYS_030B1002
PCI\VEN_1002&DEV_71C2&CC_030000
PCI\VEN_1002&DEV_71C2&CC_0300

ATI Raedon X1600 Pro (AGP)
512 mb ram (DDR2)
Windows XP Pro SP2
Current working Drivers: Original 7.11

Drivers that did not work are the Original 7.10 and 7.12 and I have not tried Omega's 7.12 yet.

I did report to AMD on the cat feedback and they responded telling me to use 7.7 but i'm not interested in going backwards since the 7.11's work. Also the 7.11's fixed my problem of the 3d games just going to the desktop at random.

Thanks all!

simbus82 · Jan 16, 2008, 12:44 AM

ID Hardware PRIMARY

PCI\VEN_1002&DEV_4B49&SUBSYS_00000000&REV_00
PCI\VEN_1002&DEV_4B49&SUBSYS_00000000
PCI\VEN_1002&DEV_4B49&REV_00
PCI\VEN_1002&DEV_4B49
PCI\VEN_1002&DEV_4B49&CC_030000
PCI\VEN_1002&DEV_4B49&CC_0300

ID Hardware SECONDARY
PCI\VEN_1002&DEV_4B69&SUBSYS_00010000&REV_00
PCI\VEN_1002&DEV_4B69&SUBSYS_00010000
PCI\VEN_1002&DEV_4B69&CC_038000
PCI\VEN_1002&DEV_4B69&CC_0380

GPU-Z

The brand?

Xpertvision / Palit

This is a 850xt with a proprietary pcb and without temp and fan control....

From 7.9 to 7.12 , 3 errors in dxdiag.... only opengl work. D3D is broken!!!!

Win xp sp2, athlon 3200+, 1,5GB ddr400, abit nf7-s v2.0.

Please insert this ids into drivers!!! THANKS!

Bart1987 · Jan 16, 2008, 11:45 AM

Ati catalyst 8.1 hotfix is out: Fix for problems with DirectX and Radeon AGP Graphics cards.

AMD Customer Care

DeKay · Jan 16, 2008, 11:43 PM

anyone tried them out?

MaZ · Jan 17, 2008, 09:13 AM

Download now right now, hope it works

Detected my card without a problem

Ecology · Jan 17, 2008, 10:01 AM

Quote:

Originally Posted by Bart1987

Ati catalyst 8.1 hotfix is out: Fix for problems with DirectX and Radeon AGP Graphics cards.

AMD Customer Care

OMG
is it real?

MaZ · Jan 17, 2008, 10:17 AM

Still having problems with Counter-Strike i will try with other games.

simbus82 · Jan 17, 2008, 12:25 PM

Quote:

Originally Posted by Bart1987

Ati catalyst 8.1 hotfix is out: Fix for problems with DirectX and Radeon AGP Graphics cards.

AMD Customer Care

THEY DO THE WORK!!!!!!!!!!!!!!!!!!!!!!

YEAHHHHHHHHHHH!!!

So long..... from 7.8 to 8.1.....

DeKay · Jan 17, 2008, 03:00 PM

Quote:

Originally Posted by MaZ

Still having problems with Counter-Strike i will try with other games.

having problems on CS / Quake 3 ...
driver installation works flawlessly however so we got a good point there

now if 3D could work, then we'd be in heaven !

comon, one more try amd pleaseeee

Bart1987 · Jan 17, 2008, 05:51 PM

this wasn't supposed to fix problems with CS or quake 3, just the problem with agp users that failed the directx diag tests. Can you complete those without problems?

DeKay · Jan 17, 2008, 06:43 PM

directdraw works
direct3d gives me a spinning cube but the textures on the sides of it are all wrong except for the direct9 test.....

Dyre Straits · Jan 17, 2008, 08:26 PM

Quote:

Originally Posted by DeKay

directdraw works
direct3d gives me a spinning cube but the textures on the sides of it are all wrong except for the direct9 test.....

Did you try installing the official 8.1s and then the Hotfix? I thought I read that it must be done in this way to work. I'm no longer using AGP cards so can't test it.

MaZ · Jan 17, 2008, 08:54 PM

The hotfix fixes some issues in some games where the menu would move a very bad, games like FIFA08 or Tony Hawk's Pro Skater 4.
For starters is good.

FlyByU · Jan 20, 2008, 12:03 PM

With the new hotfix I can actually get Medieval2 Total War running without a BSOD, but it is very slow and I am unable to play the game (stuttering, jumpy). I had a ATI X1600Pro 256 before and it ran it with no problems I figured the HD2600 512 would have been better but with the driver problems it is worse. I am going to install Rome Total War and see if I can play it without a BSOD, and slow frame rate (stuttering, jumpy).

Update:

Also want to add that Call of Duty plays for awhile then my system reboots using the agp 8.1 hotfix. So now I'm back to Omega Drivers latest version.

Dec 29, 2007, 04:23 PM	#35
blackdog HardwareHeaven Lover Join Date: Nov 2002 Location: Frozen North of 49 Posts: 104 Rep Power: 0	PCI\VEN_1002&DEV_554D&SUBSYS_03021002&REV_00 PCI\VEN_1002&DEV_554D&SUBSYS_03021002 PCI\VEN_1002&DEV_554D&CC_030000 PCI\VEN_1002&DEV_554D&CC_0300 ATI X800XL 256mb Latest Omega drivers (Cat 7.10 version) work like a charm, any Catylyst above 7.8 don't work especially D3D. This card runs on my old Athlon XP 3200 with A7N8X-E(nforce-2) board, 2gb pc3200 ram. Old system but still provides decent (non sm 3) gaming for my kids Last edited by blackdog; Dec 29, 2007 at 04:29 PM.

Dec 30, 2007, 04:31 PM	#36
crazyquay DriverHeaven Newbie Join Date: Oct 2006 Posts: 1 Rep Power: 0	VisionTek X1950PRO 256MB AGP I've recently installed this video card on an Asus A8V Deluxe mobo. Lots of blank screens, crashes and spontaneous reboots when running in 3D. Tried various driver versions and nothing helped including the VisionTek recommended 7.7 drivers. When looking over the AGP settings in BIOS, I noticed that both AGP 3.0 Calibration Cycle and DBI Output for AGP Trans were enabled. Defaults for these are disabled, but I had changed them for BIOS optimization when the AGP card installed at the time was an ATI 9600XT. That did the trick.... very stable in 3D now. I suspect the AGP 3.0 Calibration Cycle is the only option that needed to be disabled but I haven't tested any further. If any of you with X1950 cards and A8Vs are having problems, check your BIOS settings - maybe you'll get lucky.

Jan 2, 2008, 04:49 AM	#37
jandarsun8 HardwareHeaven Addict Join Date: Jan 2008 Location: MN, US Posts: 321 Rep Power: 45 System Specs	PCI\VEN_1002&DEV_7280&SUBSYS_E190174B&REV_9A PCI\VEN_1002&DEV_7280&SUBSYS_E190174B PCI\VEN_1002&DEV_7280&CC_030000 PCI\VEN_1002&DEV_7280&CC_0300 Sapphire X1950 Pro 512 Meg AGP card. PCI\VEN_1002&DEV_4B4B&SUBSYS_03121002&REV_00 PCI\VEN_1002&DEV_4B4B&SUBSYS_03121002 PCI\VEN_1002&DEV_4B4B&CC_030000 PCI\VEN_1002&DEV_4B4B&CC_0300 ATI X850 Pro 256 Meg AGP card in spare box. The Sapphire card has worked with all of the Cat drivers (haven't tried 7.12 yet) however I use the Omega drivers because they are less bloated. ATI's own X850 Pro is a different story all together. ATI's drivers have not worked since version 7.0. The drivers install fine how ever launching any game on it will not work. Continues to come up with a "No Direct 3D device installed" error. I have no choice other then the Omega drivers in order to game on it using that box. The specs for the machine that the X850 is: Asrock K7VT4A Pro with a VIA KT600 chipset AMD Sempron 2800+ 2 gig ram ATI X850 Pro agp card X-Gamers 5.1 sound card Games that have not worked unless using the Omega drivers. CoD 2 WoW Splinter Cell (any of them) Rainbow Six 3: Raven Shield or Athena Sword Thief 3 MoH: Pacific Assault I have not tested any other games out of frustration and since using the Omega drivers it's worked fine so haven't wanted to go back to test it. Last edited by jandarsun8; Jan 2, 2008 at 05:12 AM.

Jan 16, 2008, 11:45 AM	#49
Bart1987 DriverHeaven Senior Member Join Date: Jul 2003 Location: The Netherlands Posts: 634 Rep Power: 0	Ati catalyst 8.1 hotfix is out: Fix for problems with DirectX and Radeon AGP Graphics cards. AMD Customer Care Last edited by Bart1987; Jan 16, 2008 at 10:01 PM.

Jan 16, 2008, 11:43 PM	#50
DeKay DriverHeaven Newbie Join Date: Oct 2003 Posts: 12 Rep Power: 0	anyone tried them out? __________________ --DeKay

Dec 29, 2007, 11:20 AM	#32
Bajtman DriverHeaven Newbie Join Date: Dec 2007 Posts: 1 Rep Power: 0	PCI\VEN_1002&DEV_71C1&SUBSYS_02101043&REV_9E PCI\VEN_1002&DEV_71C1&SUBSYS_02101043 PCI\VEN_1002&DEV_71C1&CC_030000 PCI\VEN_1002&DEV_71C1&CC_0300 ASUS AX1650PRO AGP DDR2 256MB 600/800. Official ATI Catalyst 7.12 drivers do not work with this 'video card', same as 7.10, 7.9, 7.8, 7.7, 7.6, 7.5 ...and asus stop updated driver on version cat. 7.1(8.33)(X-G Warcats 7.4 is the lat driver working with this card).

Dec 29, 2007, 12:33 PM	#34
djgoan DriverHeaven Newbie Join Date: Dec 2007 Location: sweden Posts: 6 Rep Power: 0	as i understand the problem now is only with nforce2 chipset...and ofc i have that.....have tested all old ati and omega drivers...none of them works....the one i got from shappires homepage gives me 3d problem...otherwise it works.....have put my old nvidia gf4800se card back and it works perfect after finding some old drivers.......ati/shappire go f yourselfs

Jan 6, 2008, 02:02 AM	#38
Blad31k DriverHeaven Newbie Join Date: Dec 2007 Posts: 2 Rep Power: 0	PCI\VEN_1002&DEV_7244&SUBSYS_317218BC&REV_00 PCI\VEN_1002&DEV_7244&SUBSYS_317218BC PCI\VEN_1002&DEV_7244&CC_030000 PCI\VEN_1002&DEV_7244&CC_0300 Im still unable to play Crysis and the same with Need for Speed: Most Wanted. Each time i try to run these 2 games the artifacts and these weird lines that taper down obscure my view and rendering me to be able to play the game. I also play Guild Wars and Rome:Total War and i seem to have no problems with these 2 game as i think it is due to the graphics are less demanding. I've tried so much and many different drivers and still no look its so frustrating. I have posted about a month back now and you can see in more detail on page 2 of my post. There must be a solution to this im sure its down to ATI drivers, please if any one can resolve this it would be highly appreciated. Thank you for you time.

Jan 11, 2008, 09:16 AM	#41
Bart1987 DriverHeaven Senior Member Join Date: Jul 2003 Location: The Netherlands Posts: 634 Rep Power: 0	I haven't had any problems since I reinstalled my pc, I'm using cat 7.12 right now

Jan 13, 2008, 04:40 AM	#43
brack DriverHeaven Newbie Join Date: Jan 2008 Posts: 2 Rep Power: 0	PCI\VEN_1002&DEV_9587&SUBSYS_00281002&REV_00 PCI\VEN_1002&DEV_9587&SUBSYS_00281002 PCI\VEN_1002&DEV_9587&CC_030000 PCI\VEN_1002&DEV_9587&CC_0300 Sapphire HD 2600 Pro 512 Meg DDR2 AGP card Omega 3.8.442 Driver (ATI 7.12 I could not install - when run could not find device) Windows XP Home Edition - Pentium (R) 4 CPU 2.8 GHz, 2.81 GHz, 2.0 GB Ram

Jan 14, 2008, 12:13 AM	#44
Satan2k DriverHeaven Junior Member Join Date: Jan 2008 Posts: 26 Rep Power: 0	i got exactly the same card and the same issues with the catalyst installer Using now the omega drivers Its working pretty well

Jan 15, 2008, 06:31 PM	#45
thegave -=[DHzer0point Team]=- Join Date: Jan 2005 Posts: 96 Rep Power: 0	Weird double post. Can be deleted.

Jan 15, 2008, 06:32 PM	#46
thegave -=[DHzer0point Team]=- Join Date: Jan 2005 Posts: 96 Rep Power: 0	PCI\VEN_1002&DEV_7280&SUBSYS_E190174B&REV_9A PCI\VEN_1002&DEV_7280&SUBSYS_E190174B PCI\VEN+1002&DEV_7280&CC_030000 PCI\VEN_1002&DEV_7280&CC_0300 Sapphire ATi Radeon X1950Pro 512mb DDR3 Windows XP Professional Omega Catalyst 4.8.442 (Cat 7.12) Everything working fine so far.

Jan 15, 2008, 08:53 PM	#47
crack1up DriverHeaven Junior Member Join Date: Jun 2005 Posts: 82 Rep Power: 0	PCI\VEN_1002&DEV_71C2&SUBSYS_030B1002&REV_00 PCI\VEN_1002&DEV_71C2&SUBSYS_030B1002 PCI\VEN_1002&DEV_71C2&CC_030000 PCI\VEN_1002&DEV_71C2&CC_0300 ATI Raedon X1600 Pro (AGP) 512 mb ram (DDR2) Windows XP Pro SP2 Current working Drivers: Original 7.11 Drivers that did not work are the Original 7.10 and 7.12 and I have not tried Omega's 7.12 yet. I did report to AMD on the cat feedback and they responded telling me to use 7.7 but i'm not interested in going backwards since the 7.11's work. Also the 7.11's fixed my problem of the 3d games just going to the desktop at random. Thanks all!

Jan 16, 2008, 12:44 AM	#48
simbus82 DriverHeaven Newbie Join Date: Jan 2008 Location: Baruchella (ROVIGO - 120Km from Venice) Italy Posts: 2 Rep Power: 0	ID Hardware PRIMARY PCI\VEN_1002&DEV_4B49&SUBSYS_00000000&REV_00 PCI\VEN_1002&DEV_4B49&SUBSYS_00000000 PCI\VEN_1002&DEV_4B49&REV_00 PCI\VEN_1002&DEV_4B49 PCI\VEN_1002&DEV_4B49&CC_030000 PCI\VEN_1002&DEV_4B49&CC_0300 ID Hardware SECONDARY PCI\VEN_1002&DEV_4B69&SUBSYS_00010000&REV_00 PCI\VEN_1002&DEV_4B69&SUBSYS_00010000 PCI\VEN_1002&DEV_4B69&CC_038000 PCI\VEN_1002&DEV_4B69&CC_0380 GPU-Z The brand? Xpertvision / Palit This is a 850xt with a proprietary pcb and without temp and fan control.... From 7.9 to 7.12 , 3 errors in dxdiag.... only opengl work. D3D is broken!!!! Win xp sp2, athlon 3200+, 1,5GB ddr400, abit nf7-s v2.0. Please insert this ids into drivers!!! THANKS!

Jan 17, 2008, 09:13 AM	#51
MaZ DriverHeaven Newbie Join Date: Dec 2007 Posts: 7 Rep Power: 0	Download now right now, hope it works Detected my card without a problem

Jan 17, 2008, 10:17 AM	#53
MaZ DriverHeaven Newbie Join Date: Dec 2007 Posts: 7 Rep Power: 0	Still having problems with Counter-Strike i will try with other games.

Jan 17, 2008, 05:51 PM	#56
Bart1987 DriverHeaven Senior Member Join Date: Jul 2003 Location: The Netherlands Posts: 634 Rep Power: 0	this wasn't supposed to fix problems with CS or quake 3, just the problem with agp users that failed the directx diag tests. Can you complete those without problems?

Jan 17, 2008, 06:43 PM	#57
DeKay DriverHeaven Newbie Join Date: Oct 2003 Posts: 12 Rep Power: 0	directdraw works direct3d gives me a spinning cube but the textures on the sides of it are all wrong except for the direct9 test..... __________________ --DeKay

Jan 17, 2008, 08:54 PM	#59
MaZ DriverHeaven Newbie Join Date: Dec 2007 Posts: 7 Rep Power: 0	The hotfix fixes some issues in some games where the menu would move a very bad, games like FIFA08 or Tony Hawk's Pro Skater 4. For starters is good.

Jan 20, 2008, 12:03 PM	#60
FlyByU DriverHeaven Newbie Join Date: Jul 2006 Location: Indiana, U.S.A. Posts: 17 Rep Power: 0	With the new hotfix I can actually get Medieval2 Total War running without a BSOD, but it is very slow and I am unable to play the game (stuttering, jumpy). I had a ATI X1600Pro 256 before and it ran it with no problems I figured the HD2600 512 would have been better but with the driver problems it is worse. I am going to install Rome Total War and see if I can play it without a BSOD, and slow frame rate (stuttering, jumpy). Update: Also want to add that Call of Duty plays for awhile then my system reboots using the agp 8.1 hotfix. So now I'm back to Omega Drivers latest version. Last edited by FlyByU; Jan 21, 2008 at 06:25 PM.