wasnt able to overclock X800XT to pe

ReV smokey255 · Dec 28, 2004, 11:16 PM

ok i wasnt able to overclock to the pe. Like when i did it wouldnt run 3dmark. But the temps werent that high is there any reason why it is not able to overclock that high . I have a 5800 RPM torando case fan right above it so air is blowing out. i was using ati drivers. it is the gigabyte vivo X800XT. When i test it with ati tool it said it would be able to

MiDKnYtE · Dec 29, 2004, 12:06 AM

what did you get to? overclocking to PE speed is not guaranteed. it's all luck of the draw. try OCing the core, then the ram separately. that would isolate what is limiting you.

ReV smokey255 · Dec 29, 2004, 12:39 AM

well i used ati tool get to the limit and it said it was able to run there

MiDKnYtE · Dec 29, 2004, 01:01 AM

like I said, try only OCing the core and see what the max is. then do the same for the memory. You'll probably find that one or the other is holding you back from full PE speeds.

ToP3koms · Dec 29, 2004, 03:02 AM

I wouldn't put to much trust in what ATI tool says.Just test the core and memory seperately to see whats holding you back,but for the most part if you have a X800XT your probably cpu limited in realworld gaming anyway.

ReV smokey255 · Dec 29, 2004, 04:17 AM

i have a amd athlon 3500

~~Vasot~~ · Dec 29, 2004, 11:10 AM

Quote:

Originally Posted by ReV smokey255

ok i wasnt able to overclock to the pe. Like when i did it wouldnt run 3dmark. But the temps werent that high is there any reason why it is not able to overclock that high . I have a 5800 RPM torando case fan right above it so air is blowing out. i was using ati drivers. it is the gigabyte vivo X800XT. When i test it with ati tool it said it would be able to

We have the same card

I was able succesfully to OC to 520/560 (Platinum default Clock) from 500\500 without artifacts etc

Try that setting

Clubber · Dec 29, 2004, 11:39 PM

I wouldn't use ATI Tool. I fried my first 800xtpe with it.

ReV smokey255 · Dec 30, 2004, 09:47 PM

where you get the wdm

ReV smokey255 · Dec 30, 2004, 09:48 PM

what you use to overclock

The_Neon_Cowboy · Dec 31, 2004, 03:34 AM

The current rule of thumb...

X800pros are great over clockers,
X800XT's are poor over clockers,
X800XT PE's are good over clockers,

Quote:

Originally Posted by ReV smokey255

well i used ati tool get to the limit and it said it was able to run there

ATI TOOL sucks you need to do it the old fasioned way....

use a to like radlinker

Up the clocks a little.. run 3dmark watch carefully for ANY artifacts
repeat... go about 5 Mhz at a time... do core and memory seprate

If you see artifacts back down about 10-15Mhz try again should
be your sweete spot.

ALLWAYS REMEMBER your room and case temps advesly affects you heat sinks
cooling potential. What may be a good stable O/C at 68 deg F may not be one at 75 deg F.

Be VERRY CAREFULL and as always this is @ your own risk

(Note to moderators: Doesnt this thread belong in the Overclocking and Modding forum )

mike2h · Dec 31, 2004, 03:50 AM

6800 gt os to ultra 4c temp variance. clock to 420/1160 8c temp variance. absolutley stable. do not think the core will go higher but mem has potential.
notice!- this is pure spam. eyes only neon.

reholli · Dec 31, 2004, 08:25 AM

Quote:

Originally Posted by ReV smokey255

ok i wasnt able to overclock to the pe. Like when i did it wouldnt run 3dmark. But the temps werent that high is there any reason why it is not able to overclock that high . I have a 5800 RPM torando case fan right above it so air is blowing out. i was using ati drivers. it is the gigabyte vivo X800XT. When i test it with ati tool it said it would be able to

If the fan you have above the card is right above the card's HSF assembly and pulling air from the card instead of blowing air onto the card, I'd recommend flipping it. You want to increase airflow to the card, not decrease it.

ReV smokey255 · Dec 31, 2004, 08:29 PM

i dont know if i can switch the way the vantec toarndo blows and its dangerous its very fast fan and i dont want to lose a finger

mike2h · Dec 31, 2004, 08:36 PM

Quote:

Originally Posted by ReV smokey255

i dont know if i can switch the way the vantec toarndo blows and its dangerous its very fast fan and i dont want to lose a finger

you turm of your comp, unplug the fan & flip it over.

reholli is 100% correct. there is usually an arrow on the side of the fan housing denoting flow direction.

CDsDontBurn · Dec 31, 2004, 08:38 PM

i have a tornado on my side panel blowing over my 6800GT. Keeps it cool, so i'm happy. If you have your tornado sitting in the same manner as my tornado, then it should help out on cooling your x800

ReV smokey255 · Dec 31, 2004, 08:47 PM

i have the kingwin case can i buy a sidepanel fan

CDsDontBurn · Dec 31, 2004, 09:02 PM

EDIT: pix i had up were pointless

~~Vasot~~ · Jan 2, 2005, 12:50 AM

I Overclocked my card with ATI TRAY TOOL
(not with ATITOOL, they update their tool every 10 months, they are still with version 0.0.22

)

RADLINKER is also good

midnilux · Jan 3, 2005, 01:44 PM

I have a Sapphire X800XT, and that easily overclocked to X800XT PE speeds, but that's not saying much - its only 20mhz higher core speed, and 60mhz higher memory speed, I don't see how you cannot get that. I mean unless I misunderstood, you're trying to get PE speeds right? Should be easy. I did it and I have shitty stock fans all over my case.

Soilwork · Jan 3, 2005, 05:28 PM

my card sucks for overclocking. Its a GeCube x800pro VIVO which has the 16pipes enabled, but can't O/C at all otherwise it locks up. Any ideas??
my system:
Processor:
Pentium 4E 3.2GHz @ 3.6GHz Thermaltake Spark 7+
Operating System:
Windows XP SP2
Mobo:
MSI 865PE NEO 2 Platinum Edition
RAM:
2x 512MB Transcend DDR466 @ 450 MHz
Video:
GeCube x800PRO VIVO @ stock 16 Pipes
Storage:
Seagate Barracuda 80gb
Audio:
SoundBlaster Live 5.1 KX powered with 2.1 speakers.

I don't think it is heat cause the card Idles at 43c and full load at 70c whilst my case is around 33c

Geminiwave · Jan 3, 2005, 05:32 PM

yeah...i got some ideas. It wasnt meant to run 16 pipes.

try taking it down to the old 12 pipes and see that sucker OC like nobodies business.

either that or its juts a poor OCer. But anyway just be happy that you got 16 pipes, eh man?

btw THG generally suggests using powerstrip as it is kinda the best tool for OCing. I noticed MUCH BETTER results when OCing my graphics card through powerstrip than through radlinker(and ATI tool is lame. there was a time that whatever it said for your max was very conservative and you knew you had more headroom...now its so liberal that you need to drop down 10mhz from what its saying)

Soilwork · Jan 3, 2005, 05:35 PM

16 pipes rule! i just wish it would get to XT speeds. it has the 1.6ns memory and the RAD coded core so it should get there. oh well

El Kapitano · Jan 4, 2005, 08:33 PM

Quote:

Originally Posted by Soilwork

my card sucks for overclocking. Its a GeCube x800pro VIVO which has the 16pipes enabled, but can't O/C at all otherwise it locks up. Any ideas??
I don't think it is heat cause the card Idles at 43c and full load at 70c whilst my case is around 33c

VOLT MOD TIME!!!

Geminiwave · Jan 4, 2005, 10:34 PM

Quote:

Originally Posted by Soilwork

16 pipes rule! i just wish it would get to XT speeds. it has the 1.6ns memory and the RAD coded core so it should get there. oh well

it might also just be too hot. 16 pipes heats things up alot...not only that, but you appear to live in south africa(so says your info) and it gets pretty hot down there as memory serves...it could be that you just need some massive cooling there, eh?

Soilwork · Jan 4, 2005, 11:04 PM

I tried the vmod, but then it got WAY too hot 80c on the core. it isn't too hot down here, round about 30c now. hopefully i'll be getting an arctic silencer from a friend in the UK soon. I'm sure that'll help.

Dec 28, 2004, 11:16 PM	#1
ReV smokey255 John Kerry of video cards Join Date: Aug 2004 Posts: 574 Rep Power: 0	wasnt able to overclock X800XT to pe ok i wasnt able to overclock to the pe. Like when i did it wouldnt run 3dmark. But the temps werent that high is there any reason why it is not able to overclock that high . I have a 5800 RPM torando case fan right above it so air is blowing out. i was using ati drivers. it is the gigabyte vivo X800XT. When i test it with ati tool it said it would be able to Last edited by ReV smokey255; Dec 29, 2004 at 12:01 AM.

Dec 29, 2004, 03:02 AM	#5
ToP3koms Respect Human Rights Join Date: Dec 2002 Location: MD. US Posts: 149 Rep Power: 0	I wouldn't put to much trust in what ATI tool says.Just test the core and memory seperately to see whats holding you back,but for the most part if you have a X800XT your probably cpu limited in realworld gaming anyway. __________________ [color=DeepSkyBlue]_____________________________ Asus A8N-SLI Premium/Athlon64 X2 4800+ 2Gb OCZ Platnium Edition PC3200 (2,3,2,5) 2 BFG 7800GTX /Creative X-Fi Western Digital 160Gb SATA II HD /Lite-On 16X DVD-RW Pc Power & Cooling Turbo Cool 510/ WinXP Pro Sp2 [/color]

Dec 29, 2004, 11:39 PM	#8
Clubber DriverHeaven Lover Join Date: Dec 2003 Location: Boston, USA. Posts: 149 Rep Power: 0	I wouldn't use ATI Tool. I fried my first 800xtpe with it. __________________ [color=Red]DFI LanpartyUT nF4 SLI-DR Expert AMD Opteron 148 Venus G.Skill Extreme Series (2 x 1GB) eVGA 7800GT (x2) SoundBlaster Audigy 2zs SeaGate Barracuda 120GB OCZ PowerStream 600watt BIX III, Storm, Maze's, D5[/color][color=Teal][color=Red][/color] [/color]

Dec 30, 2004, 09:48 PM	Thread Starter #10
ReV smokey255 John Kerry of video cards Join Date: Aug 2004 Posts: 574 Rep Power: 0	what you use to overclock Last edited by ReV smokey255; Dec 30, 2004 at 09:57 PM.

Dec 31, 2004, 03:50 AM	#12
mike2h DriverHeaven Extreme Member Join Date: Nov 2002 Location: norcal Posts: 6,483 Rep Power: 91 System Specs	6800 gt os to ultra 4c temp variance. clock to 420/1160 8c temp variance. absolutley stable. do not think the core will go higher but mem has potential. notice!- this is pure spam. eyes only neon. __________________

Dec 29, 2004, 12:06 AM	#2
MiDKnYtE Caffeine Machine Join Date: Oct 2004 Location: Hell is empty. All the devils are here. Posts: 670 Rep Power: 0	what did you get to? overclocking to PE speed is not guaranteed. it's all luck of the draw. try OCing the core, then the ram separately. that would isolate what is limiting you.

Dec 29, 2004, 12:39 AM	Thread Starter #3
ReV smokey255 John Kerry of video cards Join Date: Aug 2004 Posts: 574 Rep Power: 0	well i used ati tool get to the limit and it said it was able to run there

Dec 29, 2004, 01:01 AM	#4
MiDKnYtE Caffeine Machine Join Date: Oct 2004 Location: Hell is empty. All the devils are here. Posts: 670 Rep Power: 0	like I said, try only OCing the core and see what the max is. then do the same for the memory. You'll probably find that one or the other is holding you back from full PE speeds.

Dec 29, 2004, 04:17 AM	Thread Starter #6
ReV smokey255 John Kerry of video cards Join Date: Aug 2004 Posts: 574 Rep Power: 0	i have a amd athlon 3500

Dec 30, 2004, 09:47 PM	Thread Starter #9
ReV smokey255 John Kerry of video cards Join Date: Aug 2004 Posts: 574 Rep Power: 0	where you get the wdm

Dec 31, 2004, 08:29 PM	Thread Starter #14
ReV smokey255 John Kerry of video cards Join Date: Aug 2004 Posts: 574 Rep Power: 0	i dont know if i can switch the way the vantec toarndo blows and its dangerous its very fast fan and i dont want to lose a finger

Dec 31, 2004, 08:38 PM	#16
CDsDontBurn Lurking DriverHeaven Join Date: May 2003 Location: Southern California Posts: 22,754 Rep Power: 231 System Specs	i have a tornado on my side panel blowing over my 6800GT. Keeps it cool, so i'm happy. If you have your tornado sitting in the same manner as my tornado, then it should help out on cooling your x800 __________________ Her First Day \| A year later

Dec 31, 2004, 08:47 PM	Thread Starter #17
ReV smokey255 John Kerry of video cards Join Date: Aug 2004 Posts: 574 Rep Power: 0	i have the kingwin case can i buy a sidepanel fan

Dec 31, 2004, 09:02 PM	#18
CDsDontBurn Lurking DriverHeaven Join Date: May 2003 Location: Southern California Posts: 22,754 Rep Power: 231 System Specs	EDIT: pix i had up were pointless __________________ Her First Day \| A year later Last edited by CDsDontBurn; Jan 3, 2005 at 06:34 PM.

Jan 2, 2005, 12:50 AM	#19
~~Vasot~~ Banned Join Date: Dec 2004 Location: GREECE Posts: 369 Rep Power: 0	I Overclocked my card with ATI TRAY TOOL (not with ATITOOL, they update their tool every 10 months, they are still with version 0.0.22 ) RADLINKER is also good

Jan 3, 2005, 01:44 PM	#20
midnilux DriverHeaven Junior Member Join Date: Sep 2004 Posts: 66 Rep Power: 0	I have a Sapphire X800XT, and that easily overclocked to X800XT PE speeds, but that's not saying much - its only 20mhz higher core speed, and 60mhz higher memory speed, I don't see how you cannot get that. I mean unless I misunderstood, you're trying to get PE speeds right? Should be easy. I did it and I have shitty stock fans all over my case.

Jan 3, 2005, 05:28 PM	#21
Soilwork A virus with shoes Join Date: May 2004 Location: Johannesburg, South Africa Posts: 236 Rep Power: 0	my card sucks for overclocking. Its a GeCube x800pro VIVO which has the 16pipes enabled, but can't O/C at all otherwise it locks up. Any ideas?? my system: Processor: Pentium 4E 3.2GHz @ 3.6GHz Thermaltake Spark 7+ Operating System: Windows XP SP2 Mobo: MSI 865PE NEO 2 Platinum Edition RAM: 2x 512MB Transcend DDR466 @ 450 MHz Video: GeCube x800PRO VIVO @ stock 16 Pipes Storage: Seagate Barracuda 80gb Audio: SoundBlaster Live 5.1 KX powered with 2.1 speakers. I don't think it is heat cause the card Idles at 43c and full load at 70c whilst my case is around 33c __________________ Last edited by Soilwork; Jan 3, 2005 at 05:30 PM. Reason: Mucked Up

Jan 3, 2005, 05:32 PM	#22
Geminiwave I Have lovely Breasts Join Date: Jul 2004 Location: In the closet... Posts: 5,395 Rep Power: 63	yeah...i got some ideas. It wasnt meant to run 16 pipes. try taking it down to the old 12 pipes and see that sucker OC like nobodies business. either that or its juts a poor OCer. But anyway just be happy that you got 16 pipes, eh man? btw THG generally suggests using powerstrip as it is kinda the best tool for OCing. I noticed MUCH BETTER results when OCing my graphics card through powerstrip than through radlinker(and ATI tool is lame. there was a time that whatever it said for your max was very conservative and you knew you had more headroom...now its so liberal that you need to drop down 10mhz from what its saying) __________________

Jan 3, 2005, 05:35 PM	#23
Soilwork A virus with shoes Join Date: May 2004 Location: Johannesburg, South Africa Posts: 236 Rep Power: 0	16 pipes rule! i just wish it would get to XT speeds. it has the 1.6ns memory and the RAD coded core so it should get there. oh well __________________

Jan 4, 2005, 11:04 PM	#26
Soilwork A virus with shoes Join Date: May 2004 Location: Johannesburg, South Africa Posts: 236 Rep Power: 0	I tried the vmod, but then it got WAY too hot 80c on the core. it isn't too hot down here, round about 30c now. hopefully i'll be getting an arctic silencer from a friend in the UK soon. I'm sure that'll help. __________________