ASIO playback

silvertones · Nov 29, 2009, 01:31 PM

A2ZSNB
One thing I can't seem to get working is playback using ASIO. I choose ASIO 00,01 in my app but no sound. ASIO 00.01 uses the 00,01 outs of FXBus right? I have sound out of FXBus 00,01 when using WDM. What am I doing wrong?For playback only I don't need to wire anything in the DSP do I. I built my own DSP. Just prolog, epilog and SRC. 0.1 & 2,3 go to a mixer and then to rear outs. 4,5 go to Cent/sub outs. SRC goes to front outs & REC L&R. I haven't changed anything in the router. I SHOULD be able to select "kx out 00 & kx out 01" in my app and hear audio but I do not. I even selected one by one the other pairs of outs in the app to see if there's some mapping issue. Nothing.
Recording from SRC to ASIO 0,1 works fine. WHAT STUPID THING AM I NOT DOING!!!!!!!!!!!1
Looking at the Router and dropping down the ASIO section it doesn't look like it used to. If I click on kx out 0 on the left all that shows on the right is a light blue box with 0. the numbers can be changed like before but there are no sliders and no other busses showing. I'm thinking that the GUI is messed up and that there is a missing slider set all the way down.

Read more: Audidgy 2 ZS Notebook http://www.hardwareheaven.com/general-...#ixzz0YFqLTtDj

Russ · Nov 29, 2009, 03:07 PM

Hmm, are you using the bundled version of ProFx?
(with a 10k2 card, you should be using FxBusX or the current version of ProFx SRC)

If so, download and install/register the current version, and then rebuild your DSP config.

silvertones · Nov 29, 2009, 05:06 PM

Hey Russ,
Long time no chat>
That was it. I was using FXBus and not FXBusX. Got it now.
Thanks much

Nov 29, 2009, 01:31 PM	#1
silvertones HardwareHeaven Addict Join Date: Jul 2006 Posts: 283 Rep Power: 39	ASIO playback A2ZSNB One thing I can't seem to get working is playback using ASIO. I choose ASIO 00,01 in my app but no sound. ASIO 00.01 uses the 00,01 outs of FXBus right? I have sound out of FXBus 00,01 when using WDM. What am I doing wrong?For playback only I don't need to wire anything in the DSP do I. I built my own DSP. Just prolog, epilog and SRC. 0.1 & 2,3 go to a mixer and then to rear outs. 4,5 go to Cent/sub outs. SRC goes to front outs & REC L&R. I haven't changed anything in the router. I SHOULD be able to select "kx out 00 & kx out 01" in my app and hear audio but I do not. I even selected one by one the other pairs of outs in the app to see if there's some mapping issue. Nothing. Recording from SRC to ASIO 0,1 works fine. WHAT STUPID THING AM I NOT DOING!!!!!!!!!!!1 Looking at the Router and dropping down the ASIO section it doesn't look like it used to. If I click on kx out 0 on the left all that shows on the right is a light blue box with 0. the numbers can be changed like before but there are no sliders and no other busses showing. I'm thinking that the GUI is messed up and that there is a missing slider set all the way down. Read more: Audidgy 2 ZS Notebook http://www.hardwareheaven.com/general-...#ixzz0YFqLTtDj Last edited by silvertones; Nov 29, 2009 at 02:25 PM.

Nov 29, 2009, 03:07 PM	#2
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,561 Rep Power: 62	Re: ASIO playback Hmm, are you using the bundled version of ProFx? (with a 10k2 card, you should be using FxBusX or the current version of ProFx SRC) If so, download and install/register the current version, and then rebuild your DSP config. Last edited by Russ; Nov 29, 2009 at 03:32 PM.

Nov 29, 2009, 05:06 PM	Thread Starter #3
silvertones HardwareHeaven Addict Join Date: Jul 2006 Posts: 283 Rep Power: 39	Re: ASIO playback Hey Russ, Long time no chat> That was it. I was using FXBus and not FXBusX. Got it now. Thanks much