Traktor Setup

reactor_bg · Aug 28, 2003, 11:05 AM

Please help me. I'm new here, and I have searched the whole board and still no answer.
I have an SoundBlaster Live! (model SB0222) with the kX drivers version 3534. In Traktor I can't get two seperate outputs, one for master and one for monitoring. I noticed that 4/5 outputs are for the black connector and 6/7 are for the green, but that's in winamp, not with the ASIO drivers. When I select these outputs in Traktor with ASIO i can't get seperate outputs. Everthing comes out from one channel. Can anyone please help.
Thanks in advance.

reactor_bg · Aug 28, 2003, 01:45 PM

please, I really need some help.
I work as DJ and have a gig after six days.

Daniel Drummond · Aug 28, 2003, 03:15 PM

Make traktor output the master in ASIO 0-1 and the monitoring in ASIO 2-3. Go into the KX DSP window and route the FX BUS 0-1 to the EPILOG's front speakers connections and FX BUS 2-3 to the EPILOG's rear speakers connection. That would work...

reactor_bg · Aug 28, 2003, 05:09 PM

it didn't quite help

the master comes out from the green connector, but from the black comes both master & monitor

got any other suggestions?

MichelSup · Aug 30, 2003, 01:41 AM

Hello,
I've been annoyed too by this setup. I've found the solution by reading deaply the help file...

So set master to 4/5 ans cue to 5/6 asio outputs
Go to the dsp router
Remove all wires from fl/fr and from sl/sr on the xrouting box, remove effects boxes if you don't need them
plug fl/fr to Analog front l/r on epilog
plug sl/sr to Analog rear l/r on epilog
remove the swap between rear and front on the main mixer panel

that's all

just an advice: put a 10 band eq between the xrouting and the epilog, it may be usefull for balancing the sound between master and headphones

Enjoy

reactor_bg · Aug 30, 2003, 06:25 PM

still the same job
i get master from the green connector and both master & monitor from the black one

Here's what I did:
First, I set the master to 4/5 and monitor to 6/7
then, in DSP, in xrouter i disconnected all sl/sr and fl/fr outs to the surrounder and connected them to the epilog to the analog front and rear l/r speakers... it just doesn't work....still the same thing
I tried loats of combination and still no answer...
All I get is master from the green connector & both master & monitor from the black.

reactor_bg · Aug 31, 2003, 06:25 AM

haha..no problems at all...
I turned the knob "cue-.blah-blah..." to the left and everything is okay!

)))))))))

Aug 28, 2003, 11:05 AM	#1
reactor_bg DriverHeaven Newbie Join Date: Aug 2003 Posts: 6 Rep Power: 0	Traktor Setup Please help me. I'm new here, and I have searched the whole board and still no answer. I have an SoundBlaster Live! (model SB0222) with the kX drivers version 3534. In Traktor I can't get two seperate outputs, one for master and one for monitoring. I noticed that 4/5 outputs are for the black connector and 6/7 are for the green, but that's in winamp, not with the ASIO drivers. When I select these outputs in Traktor with ASIO i can't get seperate outputs. Everthing comes out from one channel. Can anyone please help. Thanks in advance.

Aug 28, 2003, 01:45 PM	Thread Starter #2
reactor_bg DriverHeaven Newbie Join Date: Aug 2003 Posts: 6 Rep Power: 0	pls :) please, I really need some help. I work as DJ and have a gig after six days.

Aug 28, 2003, 03:15 PM	#3
Daniel Drummond DriverHeaven Senior Member Join Date: Dec 2002 Location: Brazil Posts: 1,137 Rep Power: 0	Make traktor output the master in ASIO 0-1 and the monitoring in ASIO 2-3. Go into the KX DSP window and route the FX BUS 0-1 to the EPILOG's front speakers connections and FX BUS 2-3 to the EPILOG's rear speakers connection. That would work... __________________ www.palcomp3.com.br/ed

Aug 28, 2003, 05:09 PM	Thread Starter #4
reactor_bg DriverHeaven Newbie Join Date: Aug 2003 Posts: 6 Rep Power: 0	it didn't quite help the master comes out from the green connector, but from the black comes both master & monitor got any other suggestions?

Aug 30, 2003, 01:41 AM	#5
MichelSup DriverHeaven Newbie Join Date: Aug 2003 Posts: 1 Rep Power: 0	Hello, I've been annoyed too by this setup. I've found the solution by reading deaply the help file... So set master to 4/5 ans cue to 5/6 asio outputs Go to the dsp router Remove all wires from fl/fr and from sl/sr on the xrouting box, remove effects boxes if you don't need them plug fl/fr to Analog front l/r on epilog plug sl/sr to Analog rear l/r on epilog remove the swap between rear and front on the main mixer panel that's all just an advice: put a 10 band eq between the xrouting and the epilog, it may be usefull for balancing the sound between master and headphones Enjoy

Aug 30, 2003, 06:25 PM	Thread Starter #6
reactor_bg DriverHeaven Newbie Join Date: Aug 2003 Posts: 6 Rep Power: 0	still the same job i get master from the green connector and both master & monitor from the black one Here's what I did: First, I set the master to 4/5 and monitor to 6/7 then, in DSP, in xrouter i disconnected all sl/sr and fl/fr outs to the surrounder and connected them to the epilog to the analog front and rear l/r speakers... it just doesn't work....still the same thing I tried loats of combination and still no answer... All I get is master from the green connector & both master & monitor from the black.

Aug 31, 2003, 06:25 AM	Thread Starter #7
reactor_bg DriverHeaven Newbie Join Date: Aug 2003 Posts: 6 Rep Power: 0	haha..no problems at all... I turned the knob "cue-.blah-blah..." to the left and everything is okay! )))))))))