Direct monitoring of LiveDrive inputs...it just doesnt happen

kaimani · Dec 4, 2004, 10:49 PM

Haven't been able to monitor the livedrive inputs directly.That is, i can't hear my novation nova which is plugged into the line-2 input.I try and set the faders in the mixer app but nothing does happen.I'm sure its something easy and obvious i'm missing,but any quick ideas would be appreciated.

kaimani · Dec 5, 2004, 01:03 PM

Well i'll be more specific.I'm using a sblive 5.1 ,and i rec audio through the live drives line in.

Up to now i was able to monitor the signal from live drives inputs and set the level from the creative

software mixer . This just doesn't happen with the kx mixer . I mean i set the faders up and nothing happens.

I know audio is getting to the line in but i can't hear anything coming out from my

speakers.

I'm not trying to use the drivers along with any sequencer,i'm just trying to hear to whatever i'm feeding the livedrive from my speakers,that's all.

.Any ideas will be appreciated.

(All my connections are working ok by the way,and i use vstis and can play audio from tracktion just fine)

peate · Dec 5, 2004, 03:27 PM

Have you swapped your speakers around? kX uses rear output by default.

TravelRec. · Dec 5, 2004, 06:31 PM

Hi!

Go to DSP forum, read sticky DSP-Setup threads or go to General forum and read sticky setup threads and learn more about the DSP. You are able to route every attached signal inside the DSP to any physical output of your card. You have to tweak the DSP - no mixer soulutions. Give it a try - it works!

kaimani · Dec 5, 2004, 11:32 PM

Figured it out!!

Used the pro fx pluggins into the dsp and everything rocks again!!

Feels like i"ve boought a new card.The dsp is fantastic!Thank you guys for helping out!

Dec 4, 2004, 10:49 PM	#1
kaimani DriverHeaven Newbie Join Date: Dec 2004 Posts: 4 Rep Power: 0	Direct monitoring of LiveDrive inputs...it just doesnt happen Haven't been able to monitor the livedrive inputs directly.That is, i can't hear my novation nova which is plugged into the line-2 input.I try and set the faders in the mixer app but nothing does happen.I'm sure its something easy and obvious i'm missing,but any quick ideas would be appreciated.

Dec 5, 2004, 06:31 PM	#4
TravelRec. Alternative Audioproductions Join Date: Sep 2003 Location: Germany / Sachsen-Anhalt Posts: 1,710 Rep Power: 56	Hi! Go to DSP forum, read sticky DSP-Setup threads or go to General forum and read sticky setup threads and learn more about the DSP. You are able to route every attached signal inside the DSP to any physical output of your card. You have to tweak the DSP - no mixer soulutions. Give it a try - it works! __________________ Always take a look behind.

Dec 5, 2004, 01:03 PM	Thread Starter #2
kaimani DriverHeaven Newbie Join Date: Dec 2004 Posts: 4 Rep Power: 0	Well i'll be more specific.I'm using a sblive 5.1 ,and i rec audio through the live drives line in. Up to now i was able to monitor the signal from live drives inputs and set the level from the creative software mixer . This just doesn't happen with the kx mixer . I mean i set the faders up and nothing happens. I know audio is getting to the line in but i can't hear anything coming out from my speakers. I'm not trying to use the drivers along with any sequencer,i'm just trying to hear to whatever i'm feeding the livedrive from my speakers,that's all. .Any ideas will be appreciated. (All my connections are working ok by the way,and i use vstis and can play audio from tracktion just fine)

Dec 5, 2004, 03:27 PM	#3
peate HardwareHeaven Addict Join Date: Oct 2003 Posts: 389 Rep Power: 55	Have you swapped your speakers around? kX uses rear output by default.

Dec 5, 2004, 11:32 PM	Thread Starter #5
kaimani DriverHeaven Newbie Join Date: Dec 2004 Posts: 4 Rep Power: 0	Figured it out!! Used the pro fx pluggins into the dsp and everything rocks again!! Feels like i"ve boought a new card.The dsp is fantastic!Thank you guys for helping out!