Q: Audigy 2 - howto fix LFE level

Endeavour · Sep 11, 2007, 08:46 PM

question:
HOW DO I TWEAK MY SYSTEM TO GET CORRECT/INCREASED LFE LEVEL??

story behind:
Hi,

after I tried various creative drivers as well as the latest YouP-PAX-AXv3.63.03d driver, i still didn't manage to get a proper LFE level.
I tried KX drivers, there, the sound was very well with enough bass, unfortunately without eax support.
Does anyone have an idea, how i can fix, tweak, mod anything, to get correct/increased LFE level??

Cheers,
End.

primetime · Sep 12, 2007, 07:47 PM

Quote:

Originally Posted by Endeavour

question:
HOW DO I TWEAK MY SYSTEM TO GET CORRECT/INCREASED LFE LEVEL??

story behind:
Hi,

after I tried various creative drivers as well as the latest YouP-PAX-AXv3.63.03d driver, i still didn't manage to get a proper LFE level.
I tried KX drivers, there, the sound was very well with enough bass, unfortunately without eax support.
Does anyone have an idea, how i can fix, tweak, mod anything, to get correct/increased LFE level??

Cheers,
End.

Since I have both an X-fi and an audigy2zs on another computer i ran some test to get it working the same on both cards. Unfortunatly this is the only fix that DOES work as seen here. BTW don't forget to fine tune the sub crosover freq to best match your subwoofer or headset. I found 2 medusa 5.1 headsets to need complety different crosover settings to sound good without distortion

Endeavour · Sep 19, 2007, 09:42 AM

Thanks for this hint. This is a workaround, but not a real solution.

Robert McClelland · Sep 19, 2007, 07:09 PM

Worst case you might wanted formated or used driverheaven cleaner for it. And used tuneup 2007 to fix any errors that you may have too. What speakers do you have?

Endeavour · Sep 19, 2007, 09:55 PM

Robert, I am using a fresh installed XP with SP2. Soundcard is Audigy2 ZS.

I checked all settings, enables bass redirection etc. I believe, with "normal" ways, there is no other way to increase bass volume.
Do you know another way, to tweak your driver for more bass?

I am using analog 5.1 speakers from Teufel. The problem only occurs with analog speakers, as known in the community.

You can contact me via ICQ, send me an PM for the Number plz.

Cheers,
End.

Sep 11, 2007, 08:46 PM	#1
Endeavour DriverHeaven Newbie Join Date: Sep 2007 Posts: 4 Rep Power: 0	Q: Audigy 2 - howto fix LFE level question: HOW DO I TWEAK MY SYSTEM TO GET CORRECT/INCREASED LFE LEVEL?? story behind: Hi, after I tried various creative drivers as well as the latest YouP-PAX-AXv3.63.03d driver, i still didn't manage to get a proper LFE level. I tried KX drivers, there, the sound was very well with enough bass, unfortunately without eax support. Does anyone have an idea, how i can fix, tweak, mod anything, to get correct/increased LFE level?? Cheers, End.

Sep 19, 2007, 07:09 PM	#4
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,252 Rep Power: 193 System Specs	Worst case you might wanted formated or used driverheaven cleaner for it. And used tuneup 2007 to fix any errors that you may have too. What speakers do you have? __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://valid.canardpc.com/show_oc.php?id=2242746

Sep 19, 2007, 09:42 AM	Thread Starter #3
Endeavour DriverHeaven Newbie Join Date: Sep 2007 Posts: 4 Rep Power: 0	Thanks for this hint. This is a workaround, but not a real solution.

Sep 19, 2007, 09:55 PM	Thread Starter #5
Endeavour DriverHeaven Newbie Join Date: Sep 2007 Posts: 4 Rep Power: 0	Robert, I am using a fresh installed XP with SP2. Soundcard is Audigy2 ZS. I checked all settings, enables bass redirection etc. I believe, with "normal" ways, there is no other way to increase bass volume. Do you know another way, to tweak your driver for more bass? I am using analog 5.1 speakers from Teufel. The problem only occurs with analog speakers, as known in the community. You can contact me via ICQ, send me an PM for the Number plz. Cheers, End.