weeeeeeeeeee...

e-Seeker · Aug 7, 2002, 02:01 AM

YES, I just received my new Audigy, and am very eager to try it out

btw. this one's with that 'missing cap'!

Necrosis · Aug 7, 2002, 02:33 AM

Quote:

Originally posted by dEykeé
YES, I just received my new Audigy, and am very eager to try it out
btw. this one's with that 'missing cap'!

Good Luck!!!

e-Seeker · Aug 7, 2002, 03:31 AM

...am just a few minutes away from cleaning my system of all creativelike and therefore ready to see if I'm lucky

Malus · Aug 7, 2002, 04:46 AM

Good luck, you'll probably need it.

e-Seeker · Aug 7, 2002, 08:31 AM

oK!
...cleaned the registry, removed everything from Creative, plugged the card in the 2nd PCI slot, and went right on to Compaq install... Everything went as if I was 3 days old and stroking my butt

(smooth!)... Aw, I can't even remotely describe you the smile that came back on my face

Anyway, here's a pic of my Audigy, the incorruptible revision, not foretold by Creative:

Necrosis · Aug 7, 2002, 07:30 PM

Thanks for the pic.

Glad to hear you have everything running smoothly again. BTW, what dig. camera did you take that pic. with?

e-Seeker · Aug 8, 2002, 03:20 AM

Quote:

Originally posted by Necrosis
Thanks for the pic.

Glad to hear you have everything running smoothly again. BTW, what dig. camera did you take that pic. with?

Welcome, as always

Camera: Epson PhotoPC 800; unbelievable little camera

e-Seeker · Aug 8, 2002, 03:32 AM

Everything seems to work fine so far...
Have changed every PCI slot to see if there'll be any problems...
...'ve also tried adding HW after the Audigy - no problems encountered...
So, I guess this is def. a good ver. of the Audigy...

RIV@NVX · Aug 18, 2002, 10:24 AM

dEykeé, I see that you are from Croatia...
I was just wondering - where have you bought your Audigy, in which shop...
And where did they accepted to replace it?

e-Seeker · Aug 20, 2002, 04:16 AM

Quote:

Originally posted by RIV@NVX
dEykeé, I see that you are from Croatia...
I was just wondering - where have you bought your Audigy, in which shop...
And where did they accepted to replace it?

LoL, welcome Dalmacijo!

...to answer you question: It's Comwear d.o.o. My friend's dad is the owner, so I guess that made a great deal in making it possible for the exchange... Dunno... ...but I'm sure you'll be able to replace it @ where you bought it, as long as you have a valid guarantee; but the problem is in waiting for the replacement card, it could take up to a month or so...

RIV@NVX · Aug 23, 2002, 03:45 PM

I just recieved new Audigy, too. It has 'missing cap' (to get this one in Croatia it is similar to win on lottery

) I just have to try it out... It is only a slight different from dEykeé's one, because it has 1AA29JJ written on chip, it seems to be a bit newer than his one.
I just hope that it will work good as it is supposed to.

Conclusion - there is a certain revision (identified by number on chip) of Audigy that has this missing cap. My old one had 17****** serial and it didn't have it. So, I guess, that 18something or 19something were series with that cap on.

FASC · Nov 13, 2002, 11:07 AM

How can I identify if my card is defective, or not? Thanks.

RIV@NVX · Nov 13, 2002, 02:57 PM

Quote:

Originally posted by FASC
How can I identify if my card is defective, or not? Thanks.

It is simple. Check for missing cap and number on chip (that one that is lastest line on chip).

FASC · Nov 13, 2002, 08:23 PM

Quote:

Originally posted by RIV@NVX
It is simple. Check for missing cap and number on chip (that one that is lastest line on chip).

I've just taken the card off the computer, and there's no cap like the one on the photo.... The model is: SB0090. My SoundFont refuses to work, and I don't know why... All help needed!

EDIT: My chip has a "sticker" over it... I just can't see the damm number, without breaking it....

FASC · Nov 13, 2002, 08:52 PM

As I mark here, I can't see the number in red, AND I DO NOT have that little "chip"...

RIV@NVX · Nov 13, 2002, 10:07 PM

Quote:

Originally posted by FASC
As I mark here, I can't see the number in red, AND I DO NOT have that little "chip"...

So, you need to take Audigy out before adding new hardware (it is one of first revisions).
If you want to, you can try to RMA it.
And, BTW, most of Audigys out there have sticker SB0090, but some of them are CT0092 (my for example).

FASC · Nov 13, 2002, 10:12 PM

The thing is I am ALWAYS testing new hardware: graphics, ethernet, video, hard-disks, DVD-RW's, combos, etc, etc!!!! I just don't get it... BTW, I never had the chance to run SoundFont, what the hell is that?

RIV@NVX · Nov 13, 2002, 10:18 PM

Quote:

Originally posted by FASC
The thing is I am ALWAYS testing new hardware: graphics, ethernet, video, hard-disks, DVD-RW's, combos, etc, etc!!!! I just don't get it... BTW, I never had the chance to run SoundFont, what the hell is that?

SoundFont is a file that contains MIDI samples.

FASC · Nov 13, 2002, 10:21 PM

Quote:

Originally posted by RIV@NVX
And, BTW, most of Audigys out there have sticker SB0090, but some of them are CT0092 (my for example).

Listen, are you trying to say that I should rip off the sticker?!

DallasStar · Nov 14, 2002, 01:14 AM

Quote:

Originally posted by FASC
The thing is I am ALWAYS testing new hardware: graphics, ethernet, video, hard-disks, DVD-RW's, combos, etc, etc!!!! I just don't get it... BTW, I never had the chance to run SoundFont, what the hell is that?

Soundfonts are basically the Audigy's method of playing midi files. Like Rivanx said, they are basically a collection of musical sounds. The good thing about them is that you can change them whenever you like and get as high quality a soundfont as you like (with the sacrifice being RAM). Therefore, you can have a regular crappy midi sounding like an mp3

.

RIV@NVX · Nov 14, 2002, 08:08 PM

Quote:

Originally posted by FASC
Listen, are you trying to say that I should rip off the sticker?!

No, I am telling that sticker is not the only thing to thrust to.
You should not rip it, you will lose warranty.

Aug 7, 2002, 02:01 AM	#1
e-Seeker AKA e-Seeker Join Date: Jul 2002 Location: Croatia, Zagreb Posts: 943 Rep Power: 0	weeeeeeeeeee... YES, I just received my new Audigy, and am very eager to try it out btw. this one's with that 'missing cap'! __________________

Aug 7, 2002, 03:31 AM	Thread Starter #3
e-Seeker AKA e-Seeker Join Date: Jul 2002 Location: Croatia, Zagreb Posts: 943 Rep Power: 0	Install... ...am just a few minutes away from cleaning my system of all creativelike and therefore ready to see if I'm lucky __________________

Aug 7, 2002, 04:46 AM	#4
Malus BSD SMASH! Join Date: May 2002 Location: A rabbit hole. . . Posts: 1,170 Rep Power: 0	Good luck, you'll probably need it. __________________ quad (FreeBSD/amd64 8-CURRENT): Intel Q6600 - Asus P5E-VM HDMI - 2x2 GB Kingston PC6400 DDR2 Ram - Seagate 320GB 7200RPM HD - 2xSeagate 1TB 7200RPM HD in RAID 1 via ZFS - Lite-On 20x DVD Multi Recorder - Coolermaster Centurion 5 router (FreeBSD/amd64 8-CURRENT): Intel E4500 - Intel D945GCNL - 2 GB PC6400 Mushkin Ram - Lite-On 48x24x48x16 - Seagate 320GB 7200RPM HD - Silverstone SST-SG02-F wanderer (FreeBSD/i386 7-CURRENT): Lenovo Thinkpad T61p mini (OS X 10.5): Intel Core 2 Duo @ 1.8Ghz, 4 GB Mushkin PC5400 Ram - Headroom MicroDAC Portable sound: Rockboxed iPod Video -> Westone UM2's Not-So-Portable Sound: Headroon MicroDAC -> Singlepower PPX3-SLAM -> Grado RS-1's or Beyerdynamic DT-880's Very-Not-Portable-Sound: Squeezebox v3 -> Denon AVR-1507 -> B&W 683's & Sunfire HRS-10

Aug 7, 2002, 08:31 AM	Thread Starter #5
e-Seeker AKA e-Seeker Join Date: Jul 2002 Location: Croatia, Zagreb Posts: 943 Rep Power: 0	Success! oK! ...cleaned the registry, removed everything from Creative, plugged the card in the 2nd PCI slot, and went right on to Compaq install... Everything went as if I was 3 days old and stroking my butt (smooth!)... Aw, I can't even remotely describe you the smile that came back on my face Anyway, here's a pic of my Audigy, the incorruptible revision, not foretold by Creative: __________________

Aug 8, 2002, 03:32 AM	Thread Starter #8
e-Seeker AKA e-Seeker Join Date: Jul 2002 Location: Croatia, Zagreb Posts: 943 Rep Power: 0	Everything seems to work fine so far... Have changed every PCI slot to see if there'll be any problems... ...'ve also tried adding HW after the Audigy - no problems encountered... So, I guess this is def. a good ver. of the Audigy... __________________

Aug 7, 2002, 07:30 PM	#6
Necrosis HardwareHeaven Extreme Member Join Date: May 2002 Location: Ohio Posts: 8,838 Rep Power: 131 System Specs	Thanks for the pic. Glad to hear you have everything running smoothly again. BTW, what dig. camera did you take that pic. with?

Aug 18, 2002, 10:24 AM	#9
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 0 System Specs	dEykeé, I see that you are from Croatia... I was just wondering - where have you bought your Audigy, in which shop... And where did they accepted to replace it? __________________ -- Vedran

Aug 23, 2002, 03:45 PM	#11
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 0 System Specs	YES!!! I just recieved new Audigy, too. It has 'missing cap' (to get this one in Croatia it is similar to win on lottery) I just have to try it out... It is only a slight different from dEykeé's one, because it has 1AA29JJ written on chip, it seems to be a bit newer than his one. I just hope that it will work good as it is supposed to. Conclusion - there is a certain revision (identified by number on chip) of Audigy that has this missing cap. My old one had 17****** serial and it didn't have it. So, I guess, that 18something or 19something were series with that cap on. __________________ -- Vedran

Nov 13, 2002, 11:07 AM	#12
FASC DriverHeaven Newbie Join Date: Nov 2002 Location: Lisbon, Portugal Posts: 15 Rep Power: 0	How can I identify if my card is defective, or not? Thanks. __________________ [COLOR=royalblue]=\[/COLOR] [COLOR=DarkOrange]A64[/COLOR] [COLOR=Teal]X2[/COLOR] 4600+ Manchester [COLOR=royalblue]/=\[/COLOR] [COLOR=Gray]Asus[/COLOR] A8N SLI Deluxe [COLOR=royalblue]/=\[/COLOR] [COLOR=Red]4x[/COLOR] 512MB PC3200 [COLOR=royalblue]/=\[/COLOR] [COLOR=YellowGreen]XFX [/COLOR]7900 GS XXX [COLOR=royalblue]/=[/COLOR] [COLOR=royalblue]=\[/COLOR] [COLOR=Red]4x[/COLOR] 80GB Hitachi SATAII [COLOR=royalblue]/=\[/COLOR] [COLOR=Blue]LC[/COLOR] [COLOR=Red]Power[/COLOR] 550W rev 2.0 [COLOR=royalblue]/=[/COLOR][COLOR=crimson][/COLOR]

Nov 13, 2002, 08:52 PM	#15
FASC DriverHeaven Newbie Join Date: Nov 2002 Location: Lisbon, Portugal Posts: 15 Rep Power: 0	As I mark here, I can't see the number in red, AND I DO NOT have that little "chip"... __________________ [COLOR=royalblue]=\[/COLOR] [COLOR=DarkOrange]A64[/COLOR] [COLOR=Teal]X2[/COLOR] 4600+ Manchester [COLOR=royalblue]/=\[/COLOR] [COLOR=Gray]Asus[/COLOR] A8N SLI Deluxe [COLOR=royalblue]/=\[/COLOR] [COLOR=Red]4x[/COLOR] 512MB PC3200 [COLOR=royalblue]/=\[/COLOR] [COLOR=YellowGreen]XFX [/COLOR]7900 GS XXX [COLOR=royalblue]/=[/COLOR] [COLOR=royalblue]=\[/COLOR] [COLOR=Red]4x[/COLOR] 80GB Hitachi SATAII [COLOR=royalblue]/=\[/COLOR] [COLOR=Blue]LC[/COLOR] [COLOR=Red]Power[/COLOR] 550W rev 2.0 [COLOR=royalblue]/=[/COLOR][COLOR=crimson][/COLOR]

Nov 13, 2002, 10:12 PM	#17
FASC DriverHeaven Newbie Join Date: Nov 2002 Location: Lisbon, Portugal Posts: 15 Rep Power: 0	LOL! The thing is I am ALWAYS testing new hardware: graphics, ethernet, video, hard-disks, DVD-RW's, combos, etc, etc!!!! I just don't get it... BTW, I never had the chance to run SoundFont, what the hell is that? __________________ [COLOR=royalblue]=\[/COLOR] [COLOR=DarkOrange]A64[/COLOR] [COLOR=Teal]X2[/COLOR] 4600+ Manchester [COLOR=royalblue]/=\[/COLOR] [COLOR=Gray]Asus[/COLOR] A8N SLI Deluxe [COLOR=royalblue]/=\[/COLOR] [COLOR=Red]4x[/COLOR] 512MB PC3200 [COLOR=royalblue]/=\[/COLOR] [COLOR=YellowGreen]XFX [/COLOR]7900 GS XXX [COLOR=royalblue]/=[/COLOR] [COLOR=royalblue]=\[/COLOR] [COLOR=Red]4x[/COLOR] 80GB Hitachi SATAII [COLOR=royalblue]/=\[/COLOR] [COLOR=Blue]LC[/COLOR] [COLOR=Red]Power[/COLOR] 550W rev 2.0 [COLOR=royalblue]/=[/COLOR][COLOR=crimson][/COLOR]