Creative Audigy 2 AD_EXT pin assignment

soloz2 · Jan 22, 2006, 05:12 AM

I have read the entire thread... I still can't get it to work. I was hoping someone who got it to work could walk me through it

**dj_stick** · Jan 22, 2006, 09:35 AM

it only partially works
the analogue inputs will not work, but midi and digital i/o should work

DDY · Jan 22, 2006, 06:58 PM

Quote:

Originally Posted by dj_stick

that card will easily work with the A2ZS

all you need to do is bridge pins 25 and 35, and then connect the correct pins from the AD_EXT to the pins on that expansion card

you'll need to figure out which pin does what on that card, perhaps using google to find the model name

Ok thanks.

I looked around google, no one seems to have any ideas. So i guess im gonna figure it all out my self.

If i connect somthing wrong, is there a chance of destroying my A2 ZS or the lil card? If not then ill use the lazy method of testing pits over and over again...

If yes then ill find my volt meter...

soloz2 · Jan 22, 2006, 08:27 PM

Quote:

Originally Posted by dj_stick

it only partially works
the analogue inputs will not work, but midi and digital i/o should work

hmm... well that's what I bought it for...the headphone out and mic in... the remote would be nice... oh well

I bought a sb live sound card off ebay for 1 cent... when it comes I'm going to try to get the live drive to work w/ that card and then put it in a different ocmputer.

l0v3r · Jan 27, 2006, 04:01 PM

You can let work everything on the Drive, including Line2/Mic2 Aux2 inputs, but you have to follow the informations posted in this thread and modify the Drive, if you want

soloz2 · Jan 27, 2006, 08:33 PM

ehh... well I bought a SB LIVE! off ebay for $7 so I'm hoping to get it to work together I just have to find some drivers... cause creative just has the updates on their website... you're at a loss if you don't have a disc or lost your disc

ben_dm2003 · Jan 27, 2006, 08:38 PM

Quote:

Originally Posted by Candyman

I have the add-on board from my SB-LIVE card and connected it to the Audigy2 card and it works fine.

Would i risk damaging anything if i tried this with my Live! drive I and x-fi extrememusic card?

I use it for gaming and want to run my headset (mic in / headphone out) thru the front live drive I, and use the 5.1 connectors on the x-fi to go to speakers.

If some changes are needed, could you explain it in non-technical language?

ben_dm2003 · Jan 27, 2006, 09:39 PM

Quote:

Originally Posted by soloz2

ehh... well I bought a SB LIVE! off ebay for $7 so I'm hoping to get it to work together I just have to find some drivers... cause creative just has the updates on their website... you're at a loss if you don't have a disc or lost your disc

if you want the original drivers from the sb live! disc let me know and i'll send em

ben_dm2003@hotmail.com

soloz2 · Jan 27, 2006, 11:03 PM

Quote:

Originally Posted by ben_dm2003

if you want the original drivers from the sb live! disc let me know and i'll send em

ben_dm2003@hotmail.com

Thanks for the offer, I send you an email

cpex · Feb 1, 2006, 08:00 PM

I have read this thread through and through many times now and there is a lot of very good info. I hope some people are still following it that can answer my questions. I have an OEM Audigy 2 ZS that came with my Dell PC. I am trying to add a SPDIF input that is capable of decodings an AC3 encoded signal. I have built a COAX to TTL level converter as described earlier in the thread and I have no problems geting stereo sound in through this circuit to pin 5 on the AD_EXT pins. My problem now is getting the Creative drivers fooled into giving me the option to select AC3 (Dolby Digital) decoding from this input. I tried connecting pin 25 to pin 35 as suggested here and in other threads. This did give me the option however the speaker setup is set to headphones and I can not get audio out of my speakers even by changing the speaker setup through the control panel. I didn't have this problem with an earlier version of the creative drivers, but AC3 decoding never did work. I can't find the older drivers online anymore (creative only post the latest).

When my dell pc came to me there was a jumper connecting pins 35 and 36 and a jumper connecting pins 33 and 34. I believe from what I have read that these are used for the front panel connections. Specificaly pin 36 connects to pin 10 at J1 which is used for headphone detection.

So my question is how should I jumper pins 25, 33, 34, 35 and 36 to fool my Audigy into thinking it has a drive bay and preserve the front panel connections? My initial idea is to leave pins 33 and 34 jumpered and tie pins 25,35, and 36 together. But this strikes me as a bad Idea, due to my understaing 35 is a input pin and you can't tie two signals to the same input. I don't want some short if I do plug in headphones. Is pin pin 36 only connected to pin 10 at J1? Does this pin tie into the audigy processor chip? Does pin 35 play two diffrent roles? Can I connect another pin to 36 to keep everything happy?

Any help would be greatly appreciated.
Thanks
JV

By the way I did try the KX drivers and got decoded AC3, but they did not seem to give me the same quality of sound. Possibly I could tweak more settings but I would prefer to stick with creative drivers if possible.

itsme · Feb 13, 2006, 08:27 PM

thank you guys for giving me the (almost) right circuit to get spdif-in (i have not build the other circuits) - and remember, on audigy 2 (zs) pin 15 is actually pin 5:

but do not make the same mistake as i did - do not use a 74 hc 04, but get a 74 HCU 04 ic.
btw, if you get crackling noise even though you are sure that the circuit is right, try soldering a big resistor (100k ohm worked for me) directly between the coax shield and the central pin. this way I could eliminate any noise.

cpex · Feb 13, 2006, 10:02 PM

Another thing to try with the SPDIF input circuit is to use a 10k resistor from the output of the first inverter to ground. This will load the inverter and prevent any false inputs to the second inverter.

Risingforce123 · Mar 23, 2006, 05:12 PM

How i can make spdif IN work in audigy 2 bulk ?

I tried to fake audigy with pins 25 and 35 and put the spdif in cord to
5,6/ or 7 pins but it's not work.

Do i need SPdif interface or adapter card or what?

Please help?

Does the all digital AD_EXT output/input need adapter/ interface?

~Ari

Sorry of my english!

jiiteepee · Mar 23, 2006, 06:23 PM

Quote:

Originally Posted by Risingforce123

How i can make spdif IN work in audigy 2 bulk ?

I tried to fake audigy with pins 25 and 35 and put the spdif in cord to
5,6/ or 7 pins but it's not work.

Do i need SPdif interface or adapter card or what?

Please help?

Does the all digital AD_EXT output/input need adapter/ interface?

~Ari

Sorry of my english!

Doesn't your A2 bulk have a CD-SPDIF-In connector onboard?

jiitee

Risingforce123 · Mar 23, 2006, 06:43 PM

Quote:

Originally Posted by jiiteepee

Doesn't your A2 bulk have a CD-SPDIF-In connector onboard?

jiitee

Card have only Spdif-out onboard. This is normally audigy 2 card without
"MODULE" you know...

I don't have clue what i must do to get SPDIF-In work???

~Ari

-thanks for reply!

jiiteepee · Mar 23, 2006, 08:58 PM

Quote:

Originally Posted by Risingforce123

Card have only Spdif-out onboard. This is normally audigy 2 card without
"MODULE" you know...

I don't have clue what i must do to get SPDIF-In work???

~Ari

-thanks for reply!

I meant the 2 pin connector on card board (Audigy 2 "OEM"/"Var Pack" cards may differ a bit so perhaps there isn't this connector in yours) :

jiitee

jiiteepee · Mar 23, 2006, 09:05 PM

There is also this solution .... http://electricstart.de/site/optical.htm

jiitee

Risingforce123 · Mar 23, 2006, 10:26 PM

Quote:

Originally Posted by jiiteepee

There is also this solution .... http://electricstart.de/site/optical.htm

jiitee

Hmm..

Good solutions!

Thanks very much!

~Ari

be_cool_maveric · Jul 24, 2006, 09:55 AM

I'm wanting to connect the front audio ports on my case to this sound card. I have no clue how or where to begin, someone help me, I'm a newbie.

Kiriakos · Aug 29, 2006, 11:47 PM

I have one X-Fi music and one I/O drive SB0010 (Audigy 1 – Platinum).

I did made the cable as shown at the XLS file, and I follow the pinout to the letter.

I am an EE 37 years old from Greece.

The results that I got is mixed .

I got working Headphones and IR (remote)

Midi ports and SPDIF not tested

Problems :

All my external analog speakers stopped working ( two pairs) .

MIC Input works but sounds totally overloaded, I have no sound adjustment on it by software, works even if the panel MIC switch is Off .

At On position ( of the hardware volume control) the MIC input become more overloaded , and digital noise as Hiss and cracks starting to come from the headphones output.

Is there anything more to try out.

To speak the truth, I did not try to rearrange any connections to improve the MIC volume issues (,I2S in (LineIn2/Mic2) p16v to 33 or 31 or 35) due the fact that my larger problem is the MUTED external speakers .

Headphones jack (In or Out), does not make a deference .

Is there any X-Fi Owner with a good advice about my problem ?

rgoggy · Sep 3, 2006, 09:49 PM

hi

i have a x-fi music.

i connected mic and headphone on the x-fi with no problem. but when i cross pin 2 and 4 the back outs don't mute.

and the spdif in doesn't work. the out does. i connectet pin 3 and 5, from the aud_ex, with my chinch. but i don't hear anything. also when i connect vcc with 4,7k ohm to GpI0

Kiriakos · Sep 4, 2006, 09:52 PM

Hello I found a work around at my above problem .

Now i have done one patent about the IS2 issue, by connecting the SB DRIVE MIC2 and AUX 2 by an analog manner to the card.

I plan to start one separate thread talking only about X-Fi, and how my patent works.
Do I have permission to use the AD_EXT pin out image and the XLS file (modified for XiFi) ) at the new thread ?

plugger · Oct 27, 2006, 11:48 AM

Quote:

Originally Posted by dj_stick

yes this has been worked out now (by a group of hardworking people in the kX forum here)

does this mean i have to wire pins 7-9 to make a spdif circuit that could be use for something like vst system link any input would be a great help before i go hacking

by the way I have spdif input working from pins 5-6 on my audigy 2 great work.Just a bit stuck trying to get clock sync with spdif.

plugger · Oct 27, 2006, 12:10 PM

I currently am trying to sync three computers together using Vst system link One pc with a sonorus I/O 16 channel adat card under windows 98 running cubase 5.2.Computer 2 has Rme hammerfall 96/52 card with word clock sync and 24 digital I/O’s via adat win Xp Pro cubase sx3 these two sync no problem at all but my third computer only has an audigy 2 card stock no drive bay I have wired pins 5and 6 to a rca put and pins 25-25 to fake the drive I have input and although the card claims to have Asio drivers I can’t seem to get it to sync spdif input and therefore cannot add it to the system link if anyone has experience with getting the Audigy card to sync to digital spdif input can you please let me know cheers in advanceJ

**dj_stick** · Oct 27, 2006, 12:24 PM

i really doubt CL Cards support VSL, as VSL requires bit accurate SPDIF signals, whereas the 10kX DSP resamples all inputs, corrupting VSL signals (there was a thread on this in the kX forum a year or so ago regarding VSL + kX, however I believe the same to apply here)

plugger · Oct 27, 2006, 12:44 PM

That really gets me how creative claim to have an asio driver ASIO =Audio Stream In / Out.so you don't think pin 7-8 wil give me what im looking for? thanks for your quick input dj. cheers

plugger · Oct 27, 2006, 12:46 PM

Quote:

Originally Posted by dj_stick

i really doubt CL Cards support VSL, as VSL requires bit accurate SPDIF signals, whereas the 10kX DSP resamples all inputs, corrupting VSL signals (there was a thread on this in the kX forum a year or so ago regarding VSL + kX, however I believe the same to apply here)

Bit accurate is an option in audio hq of creative driver.

**dj_stick** · Oct 27, 2006, 12:50 PM

that's only direct wave recording though - the way that CL cards deal with SPDIF is that for ASIO to pick up the SPDIF signal means it has to go through the 10kX DSP, hence the resampling and corruption of the VSL signal
(btw pins 7-8 on the AD_EXT are ground pins…)

plugger · Oct 27, 2006, 12:50 PM

Basically Im lazy and by the time I warm up my soldering iron someone probably tell me Im wasting my time. sorry pins 7and 9

**dj_stick** · Oct 27, 2006, 01:13 PM

pin 9 will work as an SPDIF output, and any ground pin, but i doubt you will get VSL working…

EDIT: I found the following quote in this thread

Quote:

Originally Posted by TravelRec.

The problem is not the kX-driver itself, but the 10kX-chip on creative and emu-cards - it do not provide bit to bit copying via SPDIF, that is essentially for using the VST-Link. On professional cards with this feature and a driver that supports it, the VST link works like said in the cubase online help file.

Jan 22, 2006, 05:12 AM	#271
soloz2 DriverHeaven Addict Join Date: Mar 2005 Posts: 362 Rep Power: 0	I have read the entire thread... I still can't get it to work. I was hoping someone who got it to work could walk me through it __________________ [COLOR=gray][COLOR=red]CPU:[/COLOR] AMD Opteron 165 CCBBE @ 2.8Ghz [/COLOR] [COLOR=gray][COLOR=red]Motherboard:[/COLOR] DFI nF4 SLI-DR Expert [COLOR=red]Memory:[/COLOR] 2gb G.Skill F1-4000USU2-2 [COLOR=red]Video:[/COLOR] Asus 7900GT TOP @ 700/1700 [COLOR=red]Sound:[/COLOR] Modded X-Fi Elite Pro [COLOR=red]HD:[/COLOR] 2x Seagate 250Gb RAID 0, 1 Seagate 320Gb [COLOR=red]Optical Drives:[/COLOR] Sony DVD-Rom, Plextor 16x DVD DL RW [COLOR=red]Case:[/COLOR] CM Stacker [COLOR=red]PSU:[/COLOR] PC Power & Cooling Silencer 610 [COLOR=red]Cooling:[/COLOR] Custom Water [COLOR=yellow][COLOR=red]Keyboard/Mouse:[/COLOR] [/COLOR]Saitec Eclipse & Logitech MX518 with a Razer ExactMat mouse pad [COLOR=red]Sound:[/COLOR] Modded X-fi > Soloz Audio Silver IC > Maxed PIMETA > Beyer DT 770 Pro/80 cans [COLOR=red]HTPC:[/COLOR] [/COLOR][COLOR=gray]AMD 3800X2[/COLOR][COLOR=gray], Asus A8N-SLI Deluxe, G.Skill 2GB DDR400, MSI 6600GT, Haupauge PVR150, SB [/COLOR][COLOR=gray]Audigy 2ZS[/COLOR][COLOR=gray], Samsung 16x DVD DL RW, Sunbeam Nuuo PSU, Antec P180 case, AC Freezer64 Pro, Viewsonic N2750w LCD HDTV Heatware eBay [/COLOR]

Jan 27, 2006, 08:33 PM	#276
soloz2 DriverHeaven Addict Join Date: Mar 2005 Posts: 362 Rep Power: 0	ehh... well I bought a SB LIVE! off ebay for $7 so I'm hoping to get it to work together I just have to find some drivers... cause creative just has the updates on their website... you're at a loss if you don't have a disc or lost your disc __________________ [COLOR=gray][COLOR=red]CPU:[/COLOR] AMD Opteron 165 CCBBE @ 2.8Ghz [/COLOR] [COLOR=gray][COLOR=red]Motherboard:[/COLOR] DFI nF4 SLI-DR Expert [COLOR=red]Memory:[/COLOR] 2gb G.Skill F1-4000USU2-2 [COLOR=red]Video:[/COLOR] Asus 7900GT TOP @ 700/1700 [COLOR=red]Sound:[/COLOR] Modded X-Fi Elite Pro [COLOR=red]HD:[/COLOR] 2x Seagate 250Gb RAID 0, 1 Seagate 320Gb [COLOR=red]Optical Drives:[/COLOR] Sony DVD-Rom, Plextor 16x DVD DL RW [COLOR=red]Case:[/COLOR] CM Stacker [COLOR=red]PSU:[/COLOR] PC Power & Cooling Silencer 610 [COLOR=red]Cooling:[/COLOR] Custom Water [COLOR=yellow][COLOR=red]Keyboard/Mouse:[/COLOR] [/COLOR]Saitec Eclipse & Logitech MX518 with a Razer ExactMat mouse pad [COLOR=red]Sound:[/COLOR] Modded X-fi > Soloz Audio Silver IC > Maxed PIMETA > Beyer DT 770 Pro/80 cans [COLOR=red]HTPC:[/COLOR] [/COLOR][COLOR=gray]AMD 3800X2[/COLOR][COLOR=gray], Asus A8N-SLI Deluxe, G.Skill 2GB DDR400, MSI 6600GT, Haupauge PVR150, SB [/COLOR][COLOR=gray]Audigy 2ZS[/COLOR][COLOR=gray], Samsung 16x DVD DL RW, Sunbeam Nuuo PSU, Antec P180 case, AC Freezer64 Pro, Viewsonic N2750w LCD HDTV Heatware eBay [/COLOR]

Feb 1, 2006, 08:00 PM	#280
cpex DriverHeaven Newbie Join Date: Feb 2006 Location: CA Posts: 2 Rep Power: 0	I have read this thread through and through many times now and there is a lot of very good info. I hope some people are still following it that can answer my questions. I have an OEM Audigy 2 ZS that came with my Dell PC. I am trying to add a SPDIF input that is capable of decodings an AC3 encoded signal. I have built a COAX to TTL level converter as described earlier in the thread and I have no problems geting stereo sound in through this circuit to pin 5 on the AD_EXT pins. My problem now is getting the Creative drivers fooled into giving me the option to select AC3 (Dolby Digital) decoding from this input. I tried connecting pin 25 to pin 35 as suggested here and in other threads. This did give me the option however the speaker setup is set to headphones and I can not get audio out of my speakers even by changing the speaker setup through the control panel. I didn't have this problem with an earlier version of the creative drivers, but AC3 decoding never did work. I can't find the older drivers online anymore (creative only post the latest). When my dell pc came to me there was a jumper connecting pins 35 and 36 and a jumper connecting pins 33 and 34. I believe from what I have read that these are used for the front panel connections. Specificaly pin 36 connects to pin 10 at J1 which is used for headphone detection. So my question is how should I jumper pins 25, 33, 34, 35 and 36 to fool my Audigy into thinking it has a drive bay and preserve the front panel connections? My initial idea is to leave pins 33 and 34 jumpered and tie pins 25,35, and 36 together. But this strikes me as a bad Idea, due to my understaing 35 is a input pin and you can't tie two signals to the same input. I don't want some short if I do plug in headphones. Is pin pin 36 only connected to pin 10 at J1? Does this pin tie into the audigy processor chip? Does pin 35 play two diffrent roles? Can I connect another pin to 36 to keep everything happy? Any help would be greatly appreciated. Thanks JV By the way I did try the KX drivers and got decoded AC3, but they did not seem to give me the same quality of sound. Possibly I could tweak more settings but I would prefer to stick with creative drivers if possible. Last edited by cpex; Feb 2, 2006 at 12:55 AM.

Feb 13, 2006, 08:27 PM	#281
itsme DriverHeaven Newbie Join Date: Feb 2006 Posts: 3 Rep Power: 0	audigy 2 (no zs - but will probably apply to it, too!) thank you guys for giving me the (almost) right circuit to get spdif-in (i have not build the other circuits) - and remember, on audigy 2 (zs) pin 15 is actually pin 5: but do not make the same mistake as i did - do not use a 74 hc 04, but get a 74 HCU 04 ic. btw, if you get crackling noise even though you are sure that the circuit is right, try soldering a big resistor (100k ohm worked for me) directly between the coax shield and the central pin. this way I could eliminate any noise.

Mar 23, 2006, 05:12 PM	#283
Risingforce123 DriverHeaven Newbie Join Date: Mar 2006 Posts: 3 Rep Power: 0	Need help with audigy 2 bulk How i can make spdif IN work in audigy 2 bulk ? I tried to fake audigy with pins 25 and 35 and put the spdif in cord to 5,6/ or 7 pins but it's not work. Do i need SPdif interface or adapter card or what? Please help? Does the all digital AD_EXT output/input need adapter/ interface? ~Ari Sorry of my english!

Jan 27, 2006, 04:01 PM	#275
l0v3r DriverHeaven Junior Member Join Date: Jan 2005 Location: Italy Posts: 35 Rep Power: 0	You can let work everything on the Drive, including Line2/Mic2 Aux2 inputs, but you have to follow the informations posted in this thread and modify the Drive, if you want

Feb 13, 2006, 10:02 PM	#282
cpex DriverHeaven Newbie Join Date: Feb 2006 Location: CA Posts: 2 Rep Power: 0	Another thing to try with the SPDIF input circuit is to use a 10k resistor from the output of the first inverter to ground. This will load the inverter and prevent any false inputs to the second inverter.

Mar 23, 2006, 09:05 PM	#287
jiiteepee HardwareHeaven Senior Member Join Date: Apr 2005 Location: FI Posts: 400 Rep Power: 0	There is also this solution .... http://electricstart.de/site/optical.htm jiitee

Jul 24, 2006, 09:55 AM	#289
be_cool_maveric DriverHeaven Newbie Join Date: Jul 2006 Posts: 3 Rep Power: 0	Sound Blaster Live 24bit I'm wanting to connect the front audio ports on my case to this sound card. I have no clue how or where to begin, someone help me, I'm a newbie. __________________ [color=red]Mav[/color]

Aug 29, 2006, 11:47 PM	#290
Kiriakos DriverHeaven Newbie Join Date: Aug 2006 Location: GREECE Posts: 2 Rep Power: 0	I have one X-Fi music and one I/O drive SB0010 (Audigy 1 – Platinum). I did made the cable as shown at the XLS file, and I follow the pinout to the letter. I am an EE 37 years old from Greece. The results that I got is mixed . I got working Headphones and IR (remote) Midi ports and SPDIF not tested Problems : All my external analog speakers stopped working ( two pairs) . MIC Input works but sounds totally overloaded, I have no sound adjustment on it by software, works even if the panel MIC switch is Off . At On position ( of the hardware volume control) the MIC input become more overloaded , and digital noise as Hiss and cracks starting to come from the headphones output. Is there anything more to try out. To speak the truth, I did not try to rearrange any connections to improve the MIC volume issues (,I2S in (LineIn2/Mic2) p16v to 33 or 31 or 35) due the fact that my larger problem is the MUTED external speakers . Headphones jack (In or Out), does not make a deference . Is there any X-Fi Owner with a good advice about my problem ? __________________ P4 2.8C ASUS P4C800-E DLX...OCZ Platinum R2 1GB...NX6800GT... X-Fi music V5.5...Raptors... 580W HIPER Type R... Win2k PRO SP4 Last edited by Kiriakos; Aug 29, 2006 at 11:55 PM.

Sep 3, 2006, 09:49 PM	#291
rgoggy DriverHeaven Newbie Join Date: Jul 2006 Posts: 1 Rep Power: 0	hi i have a x-fi music. i connected mic and headphone on the x-fi with no problem. but when i cross pin 2 and 4 the back outs don't mute. and the spdif in doesn't work. the out does. i connectet pin 3 and 5, from the aud_ex, with my chinch. but i don't hear anything. also when i connect vcc with 4,7k ohm to GpI0

Sep 4, 2006, 09:52 PM	#292
Kiriakos DriverHeaven Newbie Join Date: Aug 2006 Location: GREECE Posts: 2 Rep Power: 0	Hello I found a work around at my above problem . Now i have done one patent about the IS2 issue, by connecting the SB DRIVE MIC2 and AUX 2 by an analog manner to the card. I plan to start one separate thread talking only about X-Fi, and how my patent works. Do I have permission to use the AD_EXT pin out image and the XLS file (modified for XiFi) ) at the new thread ? __________________ P4 2.8C ASUS P4C800-E DLX...OCZ Platinum R2 1GB...NX6800GT... X-Fi music V5.5...Raptors... 580W HIPER Type R... Win2k PRO SP4

Oct 27, 2006, 12:10 PM	#294
plugger DriverHeaven Newbie Join Date: Oct 2006 Location: Geelong Posts: 8 Rep Power: 0	I currently am trying to sync three computers together using Vst system link One pc with a sonorus I/O 16 channel adat card under windows 98 running cubase 5.2.Computer 2 has Rme hammerfall 96/52 card with word clock sync and 24 digital I/O’s via adat win Xp Pro cubase sx3 these two sync no problem at all but my third computer only has an audigy 2 card stock no drive bay I have wired pins 5and 6 to a rca put and pins 25-25 to fake the drive I have input and although the card claims to have Asio drivers I can’t seem to get it to sync spdif input and therefore cannot add it to the system link if anyone has experience with getting the Audigy card to sync to digital spdif input can you please let me know cheers in advanceJ

Oct 27, 2006, 12:44 PM	#296
plugger DriverHeaven Newbie Join Date: Oct 2006 Location: Geelong Posts: 8 Rep Power: 0	That really gets me how creative claim to have an asio driver ASIO =Audio Stream In / Out.so you don't think pin 7-8 wil give me what im looking for? thanks for your quick input dj. cheers

Oct 27, 2006, 12:50 PM	#299
plugger DriverHeaven Newbie Join Date: Oct 2006 Location: Geelong Posts: 8 Rep Power: 0	Basically Im lazy and by the time I warm up my soldering iron someone probably tell me Im wasting my time. sorry pins 7and 9