I have an installation prob with my SB LIVE 5.1 and so i cant do the sb-aud1 thing

mistan · Nov 2, 2004, 08:23 AM

Creative software installation doesnt work..
it just doesnt detect my card
it says that it cant find any creative card on my computer
windows xp detects it
i have tried different pci slots...i get same result
my onboard audio is disabled
i really want 24bit/96khz
im an upcoming producer that needs better sound quality w/o spending money because im flat broke
if anybody can help they will be appreciated
plz
even the diagnostics cant detect the card
is there any other way to do the conversion?>
like a manual install

**dj_stick** · Nov 2, 2004, 10:35 AM

Soundblaster Live! cards do not support 24/96

mistan · Nov 2, 2004, 04:16 PM

what about the conversion thing?

i thought you at least got 96khz
i have a sb live 5.1 digital

also, is there anyway to change the line in ports to line out
like on the abit nf7 mobo?
so i can get 5.1 analog

**dj_stick** · Nov 3, 2004, 06:45 AM

the SB Live! series is locked at 16/48
if it is a SB Live! Digital (SB0060, SB010x) then you already have 5.1 analog out (the digital jack doubles as an analog output in analog mode)

mistan · Nov 3, 2004, 12:23 PM

for the 5.1 analog thing
what i meant was for the mic/line in to be changed over to line outs
so i can have the left/right channels seperate for the front and the rear

**dj_stick** · Nov 3, 2004, 07:38 PM

the jacks are ahrd-wired, you can't change them. But you already have 5.1 - what do you mean about seperate for the front and rear?

mistan · Nov 4, 2004, 04:16 AM

like with the abit nf7 mobo
actually forget it hehe

i need help with the installation thing

Shadow Lady · Nov 4, 2004, 04:28 AM

u could try making the patching proccess manually

here is an address were they explain it, i would do it but probably u wouldnt understand me

they do it for audigy2 but is the same procedure (go to manual procedure section)

http://www.tech-pc.co.uk/audigy-2.php

mistan · Nov 4, 2004, 07:43 AM

i could do that
but what about after i do that?
i still have to run setup.exe and it will still say "no sound blaster card detected"

i want better sound quality......... :/

Shadow Lady · Nov 4, 2004, 05:39 PM

it will say nothing, as it will detect the card now, if it doesnt you probably need the correct ID for your card, i know the ctcomp file says 5.1 cards are 00801061, 00801062, 00801064, 00801069, 0080106A, 0080106B, 0080106C, 00801065 but i had to add mine taht is 00801067, its also mising 00801066 and 00110001, u need your correct ID for the setup to work

mistan · Nov 5, 2004, 04:29 AM

ooohhh
ok
i will try that thx
i just dont feel lik it now though
hhahahaha
im going to do it anyways

mistan · Nov 5, 2004, 04:38 AM

how do i know which id my card is?

Shadow Lady · Nov 5, 2004, 02:49 PM

u can see that on the device manager, or u can extract it from your original software installation, using the same i6comp trick

mistan · Nov 7, 2004, 11:04 AM

so whats the point of doing this?
no quality upgrade...
what are all the benefits?
and thanks

**dj_stick** · Nov 7, 2004, 11:06 AM

the only benefits are extra features like later eax versions, control panels etc

mistan · Nov 7, 2004, 11:13 AM

no better sound quality then...

i really need an audigy 2 zs now....i make music for gods sake
i cant deal with this low quality stuff..
is there a diff between this guide and the one where you convert the sb live 5.1 into an audigy 1 because i remember it saying that you get higher khz like up to 96khz
anybody have an extra audigy 2 on hand?
maybe i can do something for it

Shadow Lady · Nov 7, 2004, 06:46 PM

actually i've felt better sound quality, dunno, maybe some bugs fixed some sound problems

Nov 2, 2004, 08:23 AM	#1
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	I have an installation prob with my SB LIVE 5.1 and so i cant do the sb-aud1 thing Creative software installation doesnt work.. it just doesnt detect my card it says that it cant find any creative card on my computer windows xp detects it i have tried different pci slots...i get same result my onboard audio is disabled i really want 24bit/96khz im an upcoming producer that needs better sound quality w/o spending money because im flat broke if anybody can help they will be appreciated plz even the diagnostics cant detect the card is there any other way to do the conversion?> like a manual install

Nov 4, 2004, 04:28 AM	#8
Shadow Lady Avril Fan Join Date: Jun 2003 Location: somewhere in colombia, okok, bogotá city :p Posts: 1,262 Rep Power: 0	u could try making the patching proccess manually here is an address were they explain it, i would do it but probably u wouldnt understand me they do it for audigy2 but is the same procedure (go to manual procedure section) http://www.tech-pc.co.uk/audigy-2.php __________________ Oblivion ftw

Nov 4, 2004, 05:39 PM	#10
Shadow Lady Avril Fan Join Date: Jun 2003 Location: somewhere in colombia, okok, bogotá city :p Posts: 1,262 Rep Power: 0	it will say nothing, as it will detect the card now, if it doesnt you probably need the correct ID for your card, i know the ctcomp file says 5.1 cards are 00801061, 00801062, 00801064, 00801069, 0080106A, 0080106B, 0080106C, 00801065 but i had to add mine taht is 00801067, its also mising 00801066 and 00110001, u need your correct ID for the setup to work __________________ Oblivion ftw

Nov 5, 2004, 02:49 PM	#13
Shadow Lady Avril Fan Join Date: Jun 2003 Location: somewhere in colombia, okok, bogotá city :p Posts: 1,262 Rep Power: 0	u can see that on the device manager, or u can extract it from your original software installation, using the same i6comp trick __________________ Oblivion ftw

Nov 7, 2004, 06:46 PM	#17
Shadow Lady Avril Fan Join Date: Jun 2003 Location: somewhere in colombia, okok, bogotá city :p Posts: 1,262 Rep Power: 0	actually i've felt better sound quality, dunno, maybe some bugs fixed some sound problems __________________ Oblivion ftw

Nov 2, 2004, 04:16 PM	Thread Starter #3
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	what about the conversion thing? i thought you at least got 96khz i have a sb live 5.1 digital also, is there anyway to change the line in ports to line out like on the abit nf7 mobo? so i can get 5.1 analog

Nov 3, 2004, 12:23 PM	Thread Starter #5
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	for the 5.1 analog thing what i meant was for the mic/line in to be changed over to line outs so i can have the left/right channels seperate for the front and the rear

Nov 4, 2004, 04:16 AM	Thread Starter #7
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	like with the abit nf7 mobo actually forget it hehe i need help with the installation thing

Nov 4, 2004, 07:43 AM	Thread Starter #9
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	i could do that but what about after i do that? i still have to run setup.exe and it will still say "no sound blaster card detected" i want better sound quality......... :/

Nov 5, 2004, 04:29 AM	Thread Starter #11
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	ooohhh ok i will try that thx i just dont feel lik it now though hhahahaha im going to do it anyways

Nov 5, 2004, 04:38 AM	Thread Starter #12
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	how do i know which id my card is?

Nov 7, 2004, 11:04 AM	Thread Starter #14
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	so whats the point of doing this? no quality upgrade... what are all the benefits? and thanks

Nov 7, 2004, 11:13 AM	Thread Starter #16
mistan DriverHeaven Junior Member Join Date: Sep 2004 Posts: 70 Rep Power: 0	no better sound quality then... i really need an audigy 2 zs now....i make music for gods sake i cant deal with this low quality stuff.. is there a diff between this guide and the one where you convert the sb live 5.1 into an audigy 1 because i remember it saying that you get higher khz like up to 96khz anybody have an extra audigy 2 on hand? maybe i can do something for it