Ryeeson

hai there,
i've a problem with my audigy 2 zs. it seem cannot use the DTS setting. when i play dvd with DTS setting, there is no sound.

i also cannot hear the different when using the DTS neo 6.

(audigy zs official driver, windows xp sp, direct 9.0c)
i have use kx and Your PAX driver before.

dj_stick

what is the difference supposed to be?
btw have you set the creative software to decode?

__________________

Ryeeson

i just wondering.. something must be different when using the DTS neo 6.. (correct me if i'm wrong).

do you mean? it is check the box in the control device under the decoder tab? yes.. i have do that.. i check everything.. (include the dobly digital).

i dont know what wrong... .. i've try uninstall/install the driver and repeat it for offical,kx, and the Your PAX driver.. but still dont hear the sound when using the DTS..

i'm using powerdvd 6 deluxe.

dj_stick

i guess CL drivers can't decode the new form of DTS then

__________________

Ryeeson

but it used to be.. well, do you have any advice?

dj_stick

try using another DVD playback software (if you have one)
perhaps the software is dodging you
either that or make sure that your card is selected by the software in its options menu

__________________

BozQ

Personally, I also don't know what the heck you want. Because you don't know what DTS:Neo 6 is for.

Creative can decode DTS DVD movies, yes. Set your software DVD player to output to SPDIF. And make sure you choose to select soundcard to decode DTS content in AudioHQ.

DTS:Neo6 is used to output your stereo content (mp3s, wma, wav) to playback to your 5.1 or 6.1 speakers. You can only activate this when you play using Creative MediaSource Player.

classic_leon

DTS neo 6 is for routing 2 channel to 6. It does not relate with DTS decoding. And it looks like a EAX setting. So, when you enable DTS neo 6, EAX will automatically disable itself. Personally it is useless for me.
BozQ vbmenu_register("postmenu_499198", true); said right. Ryeeson, vbmenu_register("postmenu_498944", true); you just do what BozQ said.

__________________
Fashion keeps us alive.

YouP-PAX Please visit http://www.A-PAX.co.uk to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.

Ryeeson

o.. ic... .. shy...

About the DTS, may be i should try winDVD.

BozQ

It doesnt even matter which program you use. As long as you set SPDIF for your audio, your sound card will decode DTS. Otherwise, it is only the software that decodes the audio.

Ryeeson

do you mean setting in the Audio HQ?

BozQ

Programs like WinDVD and PowerDVD, the audio settings does ask you what kind of speaker system you have. 2, 4, 6, 7, 8, headphones and SPDIF.
Set in to SPDIF

In AudioHQ, there is a Decoder tab (or what I would prefer to call as SPDIF tab). You can choose between decoding with your sound card or passthrough the raw AC3/DTS signal to an external decoder.

Play around and you will get the hang of it.

Ryeeson

ok.. thanx i'll try

Ryeeson

i've done all the way and it dint work. i still cannot use the DTS function. it seem that the DTS "chip controler" dint work.
i already reinstall my windows, done the all step and advice that u guys gave to me.
is there is anyone.. please help me.

[hobo]eclipse

wat kinda speaker set up u runnin? dont you need a DTS Compatible reviever too, in my case i have the Logitec z -680 n i run anaog from cpu 24/7 n use the coaxialdigital back in forth between my ApexDVD plyr n my soundstorms spdif, the APEX decodes Dolbydigital n DTS, i think u need a decoder on each end, not sure cause i mainly watch movies on tv,.... u are using either the coxial or optical digital ports are u? cause no DTS or DD w/ 3 jack analog..

BozQ

Which DVD Software are you using?

Ryeeson

Thanx for all the adivces.. my problem lready been solved. TQ