Audigy 2 Value 10 pin header

John Lodge · Feb 20, 2005, 02:55 PM

Does anyone know the pin assignments for this header. I can find lots of info on Audigy 2 by searching this site but not for the value SB0400 card.

Samir · Feb 20, 2005, 05:28 PM

You talk about 10-pin white connector labeled J1 ???

John Lodge · Feb 20, 2005, 06:49 PM

Yes that is the one. Allegedly there is a reference somewhere but I cannot find it. I can find a lot of others but not that one.

**dj_stick** · Feb 20, 2005, 08:36 PM

there is a pinout in the AD_EXT pinout thread

Samir · Feb 21, 2005, 12:47 AM

here...

John Lodge · Feb 21, 2005, 12:57 PM

Thank you ...found it.

But it has now got me thinking.

The outputs on the back of the card are labelled 1, 2, 3; 2, 3 are triples giving 6 output lines and 1 is a double but 1 is capable of driving a 32Ohm load (Creative clearly identifies that).

in kX 1 is interchanged. Seems to mean that better 5.1 would be obtained by using the two triples and leaving the double output for headphone only.

**dj_stick** · Feb 21, 2005, 07:42 PM

yes thats possible.
the headphone out from J1 mirrors what is going out the front input, instead of the headphone channel, so if you want a seperate headphone channel, you're method would be the way to go. using 2 "Camcorder cables" with a 4pole jack on one end and 3 RCA plugs on the other is the way to go

Feb 20, 2005, 02:55 PM	#1
John Lodge DriverHeaven Junior Member Join Date: Feb 2005 Posts: 71 Rep Power: 0	Audigy 2 Value 10 pin header Does anyone know the pin assignments for this header. I can find lots of info on Audigy 2 by searching this site but not for the value SB0400 card.

Feb 20, 2005, 05:28 PM	#2
Samir kX Lover Join Date: Jan 2003 Posts: 520 Rep Power: 0	You talk about 10-pin white connector labeled J1 ??? __________________ MU3NKA 3A HAPO6!

Feb 21, 2005, 12:47 AM	#5
Samir kX Lover Join Date: Jan 2003 Posts: 520 Rep Power: 0	here... __________________ MU3NKA 3A HAPO6!

Feb 20, 2005, 06:49 PM	Thread Starter #3
John Lodge DriverHeaven Junior Member Join Date: Feb 2005 Posts: 71 Rep Power: 0	Yes that is the one. Allegedly there is a reference somewhere but I cannot find it. I can find a lot of others but not that one.

Feb 21, 2005, 12:57 PM	Thread Starter #6
John Lodge DriverHeaven Junior Member Join Date: Feb 2005 Posts: 71 Rep Power: 0	Thank you ...found it. But it has now got me thinking. The outputs on the back of the card are labelled 1, 2, 3; 2, 3 are triples giving 6 output lines and 1 is a double but 1 is capable of driving a 32Ohm load (Creative clearly identifies that). in kX 1 is interchanged. Seems to mean that better 5.1 would be obtained by using the two triples and leaving the double output for headphone only.