And now my soundcard isn't working properly

m0gg3 · May 10, 2005, 10:49 PM

Hello.

I got info of this drivers today, and thought, YES what a nice driver, I've always wanted my music to sound better. I downloaded everything to be sure, read the manual/instructions over and over again.. didn't understand everything clearly so I did chance. Wrong damn chance. Now my computer is totally f'cked up.(sorry).

I got a SB Live and I uninstalled everything now and want to restart from beginning, as my old orginal drivers from creative.com. But what happends, as soon as I've uninstalled, reboot in safe mode, go for drivercleaner pro, delete reg entrys, restart, my computer keep telling me it found a new hardware, of course, It's my soundcard BUT it's wrong drivers, it keep telling me that there is the EMU10k drivers, that happend since I installed the youp-pax stuff. And it won't let me get back to Soundblaster [9000] or what i had. Im so damn pissed, i've been sitting with this for 6 hours now, since school ended, until now, Im goin to sleep soon. I've uninstalled from the installer everything, done everything stated at this page, and it won't work.
My mouse and whole computer can also lag sometimes, just a few sec then start thinkin again.
Hope someone can explain this.

Thanks.

/Pissed m0gg3

**dj_stick** · May 11, 2005, 01:08 AM

go into safe mode and remove any driver cache folder (back up an archive first) and see if that works
otherwise install the original CL drivers and if it works it doesn't matter what the computer thinks your card's name is

m0gg3 · May 11, 2005, 08:13 AM

Thanks im goin to try that after school.
Btw, im not so good at this, so where is those cache files and what are CL drivers?
I might find when I come home but to be sure

classic_leon · May 11, 2005, 10:02 AM

You haven't told us what PAX drivers you're using. I wonder if you install Audigy2 drivers on your sound card.

m0gg3 · May 11, 2005, 02:08 PM

PAX-NewYear2005 - 253MB - Server 1
From ordorica.org

YouP-PAX-VIv2.2.7z - 13MB - Server 1
from ordorica.org

Installed sblive drivers

Then I followed this guide:
http://www.hardwareheaven.com/showpost...3&postcount=67

and read alot of the pages there. Couldn't find any clue to my problem. And like I said, I wasn't 100% sure to what I should do, didn't understand the guide totally so I did a chance. But there most be someway to fix it

Btw, using windows 2000.

Thanks.

Btw. I would kneel for you if you wrote a detailed guide to install youp pax on my soundblaster live card. I might be to stupid for this but after all comments that the sound is so good I really want it

classic_leon · May 11, 2005, 06:10 PM

Quote:

Originally Posted by m0gg3

PAX-NewYear2005 - 253MB - Server 1
From ordorica.org

YouP-PAX-VIv2.2.7z - 13MB - Server 1
from ordorica.org

Installed sblive drivers

Then I followed this guide:
http://www.hardwareheaven.com/showpost...3&postcount=67

and read alot of the pages there. Couldn't find any clue to my problem. And like I said, I wasn't 100% sure to what I should do, didn't understand the guide totally so I did a chance. But there most be someway to fix it

Btw, using windows 2000.

Thanks.

Btw. I would kneel for you if you wrote a detailed guide to install youp pax on my soundblaster live card. I might be to stupid for this but after all comments that the sound is so good I really want it

Thank you! I think it's the time for it that in need to be formal.

m0gg3 · May 11, 2005, 10:09 PM

I took out my sblive card from my computer and using my soundstorm on abit nf7 motherboard for awhile. Until I get a new system, and maybe I understand this a little better

Thanks for everything anyway. Im goin to check this out sometimes and defintive when I get a new system

Thanks and cya for awhile.

classic_leon · May 12, 2005, 06:51 PM

The drivers have been re-uploaded after several bugs were fixed.
Direct link: http://bt.99hifi.com:80/youp/YouP-PAX-VIv2.2.rar

Stps to Install:
1, remove the drivers now you are using;
2, download it and click to extract;
3, clike to execute drivers and choose English Interface;
4, agree and click "next";
5, choose to install [color=#dddddd]YouP-PAX-VIv2.2.rar (music)[/color]
6, install drivers and click "continue any way"
7, click "cancel" to finish installing
8, restart.

m0gg3 · May 13, 2005, 11:56 AM

[Big Edit]

I got it working!

And this sound is so damn good! Never heard better, you've done a really good job here.

Just one more question. About the New Year pack. Does that contains all applications? Is it recommended to have? I like the sound like it is now, but the center speaker won't work but it hasn't before either :P

A big great thanks for this. Keep up the good work!

classic_leon · May 15, 2005, 05:06 PM

Yes, New Year 2005 pack contains all applications. It's recommended to have .

May 10, 2005, 10:49 PM	#1
m0gg3 DriverHeaven Newbie Join Date: May 2005 Posts: 7 Rep Power: 0	And now my soundcard isn't working properly Hello. I got info of this drivers today, and thought, YES what a nice driver, I've always wanted my music to sound better. I downloaded everything to be sure, read the manual/instructions over and over again.. didn't understand everything clearly so I did chance. Wrong damn chance. Now my computer is totally f'cked up.(sorry). I got a SB Live and I uninstalled everything now and want to restart from beginning, as my old orginal drivers from creative.com. But what happends, as soon as I've uninstalled, reboot in safe mode, go for drivercleaner pro, delete reg entrys, restart, my computer keep telling me it found a new hardware, of course, It's my soundcard BUT it's wrong drivers, it keep telling me that there is the EMU10k drivers, that happend since I installed the youp-pax stuff. And it won't let me get back to Soundblaster [9000] or what i had. Im so damn pissed, i've been sitting with this for 6 hours now, since school ended, until now, Im goin to sleep soon. I've uninstalled from the installer everything, done everything stated at this page, and it won't work. My mouse and whole computer can also lag sometimes, just a few sec then start thinkin again. Hope someone can explain this. Thanks. /Pissed m0gg3

May 11, 2005, 08:13 AM	Thread Starter #3
m0gg3 DriverHeaven Newbie Join Date: May 2005 Posts: 7 Rep Power: 0	Thanks im goin to try that after school. Btw, im not so good at this, so where is those cache files and what are CL drivers? I might find when I come home but to be sure Last edited by m0gg3; May 11, 2005 at 08:27 AM.

May 11, 2005, 10:02 AM	#4
classic_leon HardwareHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,238 Rep Power: 0	You haven't told us what PAX drivers you're using. I wonder if you install Audigy2 drivers on your sound card. __________________ Fashion keeps us alive. YouP-PAX Please visit http://www.A-PAX.co.uk to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.

May 11, 2005, 02:08 PM	Thread Starter #5
m0gg3 DriverHeaven Newbie Join Date: May 2005 Posts: 7 Rep Power: 0	PAX-NewYear2005 - 253MB - Server 1 From ordorica.org YouP-PAX-VIv2.2.7z - 13MB - Server 1 from ordorica.org Installed sblive drivers Then I followed this guide: http://www.hardwareheaven.com/showpost...3&postcount=67 and read alot of the pages there. Couldn't find any clue to my problem. And like I said, I wasn't 100% sure to what I should do, didn't understand the guide totally so I did a chance. But there most be someway to fix it Btw, using windows 2000. Thanks. Btw. I would kneel for you if you wrote a detailed guide to install youp pax on my soundblaster live card. I might be to stupid for this but after all comments that the sound is so good I really want it Last edited by m0gg3; May 11, 2005 at 02:40 PM.

May 12, 2005, 06:51 PM	#8
classic_leon HardwareHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,238 Rep Power: 0	The drivers have been re-uploaded after several bugs were fixed. Direct link: http://bt.99hifi.com:80/youp/YouP-PAX-VIv2.2.rar Stps to Install: 1, remove the drivers now you are using; 2, download it and click to extract; 3, clike to execute drivers and choose English Interface; 4, agree and click "next"; 5, choose to install [color=#dddddd]YouP-PAX-VIv2.2.rar (music)[/color] 6, install drivers and click "continue any way" 7, click "cancel" to finish installing 8, restart. __________________ Fashion keeps us alive. YouP-PAX Please visit http://www.A-PAX.co.uk to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.

May 11, 2005, 10:09 PM	Thread Starter #7
m0gg3 DriverHeaven Newbie Join Date: May 2005 Posts: 7 Rep Power: 0	I took out my sblive card from my computer and using my soundstorm on abit nf7 motherboard for awhile. Until I get a new system, and maybe I understand this a little better Thanks for everything anyway. Im goin to check this out sometimes and defintive when I get a new system Thanks and cya for awhile.

May 13, 2005, 11:56 AM	Thread Starter #9
m0gg3 DriverHeaven Newbie Join Date: May 2005 Posts: 7 Rep Power: 0	[Big Edit] I got it working! And this sound is so damn good! Never heard better, you've done a really good job here. Just one more question. About the New Year pack. Does that contains all applications? Is it recommended to have? I like the sound like it is now, but the center speaker won't work but it hasn't before either :P A big great thanks for this. Keep up the good work! Last edited by m0gg3; May 13, 2005 at 02:27 PM.

May 15, 2005, 05:06 PM	#10
classic_leon HardwareHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,238 Rep Power: 0	Yes, New Year 2005 pack contains all applications. It's recommended to have . __________________ Fashion keeps us alive. YouP-PAX Please visit http://www.A-PAX.co.uk to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.