Guide: How to install YouP Audigy4 drivers/software

sovietdoc · Jun 28, 2005, 01:15 AM

Okay, Ill start off imagining like you have just installed windows and your computer is clean. In the end I'll say what to do if you are installing without reinstalling windows.

1. You should have a CD with [color=red]Audigy4 ISO[/color] on a CD, of it may be mounted on a virtual drive. Also you should have the YouP Audigy4 Driver versions 1.00, 1.01 or 1.02. After the windows install, install your chipset drivers and etc, then reboot and install any Service Packs but don't go to the windows update just yet. After the service pack installation, reboot and double click on the [color=red]Audigy 4 1.02 driver[/color] (i'll use 1.02 as an example). Go through it by clicking "next." A page should apper with different music presets (Music I, II and Games/DVD.) Select the one that fits you best (description of each can be found on the page before that in the installation program). Make sure when you install these drivers you install the Audio Console as well. After the driver installtion is successful, restart your PC.

2. After your computer was restarted, dont go into the Audio Console just yet to setup your system. Put in the [color=black][color=red]Audigy 4 CD[/color] (iso)[/color] with drivers. When it asks you which type of instal[color=black]l[/color] you want, always click "Custom." In the custom installation you can install anything you want but make sure "Audio Console" and "Drivers" are unchecked because you already have them. After the install, don't forget to reboot your PC.

3. After both of those have been installed, make sure you get the "[color=red]Audigy 4 patch[/color]" (link in at the end of the thread). Replace your "SpkSet.exe" which is located in X:\Program Files\Creative\SBAudigy4\Speaker Settings, with the one from the patch package. Do the same thing for the file called "SurMixer.exe", it's located in X:\Program Files\Creative\SBAudigy4\Surround Mixer. I suggest rebooting after that but thats optional.

4. After replacing those two files, get the [color=red]Speaker Calibrator[/color] from the link below. Install it and reboot. After the reboot go to your Audio Console and configure everything. Don't forget to check Sound Properties in the Control Panel, make sure speakers there are set to whatever you're using. (2.1, 4.1, 5.1 and etc.) Because a lot of time Audio Console says "5.1" for example, but in windows they're still "Desktop Stereo Speakers". Run the speaker Calibrator if you have to configure your speakers "Perfectly" lol.

I also suggest going to the www.sounblaster.com and downloading the patch for the Creative Entertainment Center from the Audigy 4 Pro support page, and the Media Source patch. They're not integrated into the Audigy 4 ISO so get them separately. Of course install them after you've installed everything else.

For the people who didn't didn't reinstall windows, get the [color=red]Driver Cleaner[/color] from the link below and clean everything with it. Install it, then after running it choose to remove everything "Creative" out of the system and within a second it should be done. Just make sure you uninstall your Audigy Drivers/Software from the control panel, before cleaning with DriverCleaner. Then reboot after everything is cleaned, make sure "Creative" folder isn't in the Program FIles anymore, Search the registry as well for Creative Tech, and delete all those entries. Reboot again and follow all previous steps.

For the people with huge shutdown delay, go to the Creative Entertainment Settings and disable it. Make sure you uncheck both "Enable" and "Enable When Windows Starts Up."

[color=red]**NOTE**[/color]
It's VERY importand that during installing everything you DO NOT change any of the default installation paths. If you do something might not work/crash. So, I warned you.

[color=red]**UPDATE**
[/color][color=black]Links have been updated as of 06/02/06 so it's working again

[/color]

Links:
[color=#8000ff]http://www.cniti.com/soft/mc/2005-14/Audigy4Pro.rar[/color] - [color=red]AUDIGY 4 ISO[/color]
http://ordorica.org/pax/YouP-PAX-A4v1.02.exe - [color=red]YOUP AUDIGY 4 v.1.02 Driver[/color]
http://rapidshare.de/files/2144413/SpkCal_eng.zip.html -[color=red]SPEAKER CALIBRATOR[/color]
http://allenlyk.webhour.biz/files/A4_Patch.7z - [color=red]AUDIGY 4 PATCH[/color] (SurMixer and SpkSet) *Thanks to Leoboom
http://members.home.nl/mclaren2000/downloads/DCProSetup_15.zip - [color=red]Driver Cleaner[/color]

P.S. Sorry for the spelling errors or if I didn't cover something. I'm just trying to help people out.

krvolok · Jun 28, 2005, 03:39 PM

EDIT: NVM, I solved the problem.

BTW, nice guide.

classic_leon · Jun 29, 2005, 03:47 PM

Thanks buddy!

BiGBrOwNPimpsta · Jun 29, 2005, 03:54 PM

had to bite my guide huh lol jk

i was thinking about doing it good job

classic_leon · Jun 29, 2005, 04:44 PM

:d...

sovietdoc · Jun 29, 2005, 08:36 PM

Thanks

I just basically summarized what people were talking about in the "Audigy4 iso" thread.

rayraymond · Jul 3, 2005, 05:13 AM

I have installed this Driver for my Audigy 2,
but i can't get the Surround Mixer, Graphics Equalizer, Audio Console and etc.. working!!!???

why is that? i have installed the Audigy 4 ISO, driver, A4_patch, speaker calibration.
I download all the files from this forum, but not this page.
any suggestions?

sovietdoc · Jul 3, 2005, 11:50 PM

Have you installed it all after reformatting your harddrive and reloading the OS? Just to make sure everything is clean. It could be a bad install or you didn't install it all after a clean installation. Remove all drivers/software and use the drive cleaner pro. Then after a reboot try following all these steps again and see if your new install will solve any problems.

P.S. To uninstall the YouP a4 driver, open up your A4 driver setup and instead of selecting which driver to install, click uninstall the driver. DO NOT uninstall YouP driver manually from "remove programs" or in the Device Manager.

rayraymond · Jul 4, 2005, 02:09 PM

i didn't reinstall everything(os) for this soundcard.
But after i installed the card with driver, the loading time(from "welcome" screen to the desktop) takes 70seconds, but if i use onboard sound it takes 4 seconds.

so there is a huge delay.

classic_leon · Jul 4, 2005, 09:02 PM

The first loading windows is slow after install those drivers and then will be okay.

rayraymond · Jul 5, 2005, 05:33 AM

Quote:

Originally Posted by classic_leon

The first loading windows is slow after install those drivers and then will be okay.

No it won't, it just keeps using 70seconds + to load xp everytime i load xp.

now i just switch to Kx, is it a smart move?

swatX · Jul 5, 2005, 06:34 AM

yea.. pictures would be nice unfortunately i gave up on creative drivers long time ago...

sad day indeed..

Radon · Jul 5, 2005, 03:42 PM

What's the default directory that the YouP-PAX-A4v1.02 gets installed?

WinXP is asking to install the driver from a specific location...

sovietdoc · Jul 5, 2005, 10:25 PM

like C:\ProgramFiles\Creative\Audigy or something, Leon probably knows better on this one...

Chronosphere · Jul 8, 2005, 11:16 PM

I did the upgrade on my Audigy 2 Platinum. For now, I installed the original ISO drivers, but an ANNOYING problem is still there (sorry for screaming). My computer still resets the speakers configuration to 2.1 everytime it boots. Annoying, since I own a set of S750's and I have to set my Audigy 2 to 6.1 EVERY TIME WINDOWS START.

I SIMPLY HATE THIS (again, sorry for screamin).

Question 1: Is there a way to fix this thing in to booting to 6.1 Always?????????

Question 2: Are there any benefits of modding my A2 to an A4????

Thanks!

sovietdoc · Jul 9, 2005, 07:16 AM

Well, try unchecking the "Synchronize with Control Panel" option in Audido Console, reboot and go to the steaper setup options in the windows control panel, set them to 6.1 or whatever. Then go to the Audio Console and make sure those are at 6.1 as well. That should work. Benefits are a slightly better sound quality and the "new look" on the software :P though there is more to it, thanks to the Audigy4 hack by YouP...so I suggest to try it out, you can always remove it if you won't like it.

leoboom · Jul 14, 2005, 08:47 AM

sorry, newbie here.. donno this question has been asked b4 or not.. just wanna know which is the best edit for me? (music edit I, music edit II or game edit)

i listen to music a lot but i do play games too.. thanks!

pigdog · Jul 14, 2005, 09:13 AM

And I'm still hoping someone will come up with a working link for the Patch . . . . . . .

leoboom · Jul 14, 2005, 10:06 AM

Quote:

Originally Posted by pigdog

And I'm still hoping someone will come up with a working link for the Patch . . . . . . .

I have uploaded the patch to my web host.. u guys can download it here until i decide to take it down

http://allenlyk.webhour.biz/files/A4_Patch.7z

krvolok · Jul 14, 2005, 12:23 PM

Here's another one:

http://www.shrani.si/pics/a4_patch41036.avi

[color=Red]Just rename the extension from "avi" to "7z" and extract.

[/color]

leoboom · Jul 14, 2005, 03:05 PM

Quote:

Originally Posted by leoboom

sorry, newbie here.. donno this question has been asked b4 or not.. just wanna know which is the best edit for me? (music edit I, music edit II or game edit)

i listen to music a lot but i do play games too.. thanks!

someone pls help me with this..

sovietdoc · Jul 14, 2005, 10:12 PM

I use Music Edit I and it works really good, I havent even tried Music II or other one. Try music edit I. But in case you're wondering whats the difference between each one of them, when you start Audigy4 Driver setip for YouP A1.02, the page before driver select page has the explanation which driver does what.

Bar81 · Jul 30, 2005, 08:41 PM

Is there a *working* link to the speaker calibrator?

Jof · Jul 30, 2005, 11:02 PM

What is this speaker calibrator? In the THX console is also a speaker calibrator!

sovietdoc · Aug 1, 2005, 08:13 AM

Speaker calibrator is the tool to calibrate your surround speakers for the best audio experience. the THX one isnt what we are talking about. We are talking about the one located in "speaker settings" and none of the people with audigy 4 pack should have it. Though you can install it on top of audigy 4 pack without messing anything up.

ssgohan434 · Aug 8, 2005, 08:11 PM

What is the device manager supposed to display after the install is done correctly? Mine says Creative SB Audigy under the "Sound, Video, and Game Conrollers" tab in device manager.

Also, the directory that we are supposed to replace the 2 files in is X:\Program Files\Creative\SBAudigy4\Speaker Settings , but for some reason for me its X:\Program Files\Creative\SBAudigy\Speaker Settings. There is no "4" after the SBAudigy folder name. Is this correct? Just making sure that i actually installed it correctly. thanks.

vearn27 · Aug 9, 2005, 01:10 AM

Hello, I just bought myself a Audigy 2 ZS and then some friends recommending me to softmod it to Audigy 4 Pro for better sound quality

I had read the guide here but I couldn't get the [color=red]AUDIGY 4 ISO [/color]and also [color=red]YOUP AUDIGY 4 v.1.02 Driver.[/color] Is there any other links where I can download the 2 files?

Then, there are certain parts that I don't understand and wish someone could help me to figure out:

1) For the YouP A4 driver, do I need v1.00 and v1.01 as well before I install v1.02 or just install v1.02 is enough?

2) And then how could I delete all the creative under my registry? I know I need to go Start --> Run --> Regedit to get to my system registry, but then any tips or guide to make the search easier?

3) I'm not installing in a clean OS, which means I just uninstall my current driver and then install this one, izzit alrite? Or is there particular steps I'll need to follow if I'm not installing in a clean OS?

Thankx in advance...

quakerjtf · Aug 9, 2005, 04:18 AM

Quote:

Originally Posted by vearn27

Hello, I just bought myself a Audigy 2 ZS and then some friends recommending me to softmod it to Audigy 4 Pro for better sound quality

I had read the guide here but I couldn't get the [color=red]AUDIGY 4 ISO [/color]and also [color=red]YOUP AUDIGY 4 v.1.02 Driver.[/color] Is there any other links where I can download the 2 files?

Then, there are certain parts that I don't understand and wish someone could help me to figure out:

1) For the YouP A4 driver, do I need v1.00 and v1.01 as well before I install v1.02 or just install v1.02 is enough?

2) And then how could I delete all the creative under my registry? I know I need to go Start --> Run --> Regedit to get to my system registry, but then any tips or guide to make the search easier?

3) I'm not installing in a clean OS, which means I just uninstall my current driver and then install this one, izzit alrite? Or is there particular steps I'll need to follow if I'm not installing in a clean OS?

Thankx in advance...

1- you only need 1.02

2- uninstall all your creative junk, then use driver cleaner to clean the registry

3- you shouldn't have a problem

vearn27 · Aug 9, 2005, 12:02 PM

Quote:

Originally Posted by quakerjtf

1- you only need 1.02

2- uninstall all your creative junk, then use driver cleaner to clean the registry

3- you shouldn't have a problem

Thankx for your answers to my questions... however, where can I download the [color=red]AUDIGY 4 ISO [/color]and [color=red]YOUP AUDIGY 4 v.1.02 Driver[/color]?

The links all seem not working anymore

vearn27 · Aug 9, 2005, 05:32 PM

I successfully softmod my Audigy 2 ZS to Audigy 4 Pro... thankx a lot everyone

When I first did it, I failed... perhaps coz I install the Creative Mediasource that comes inside the Audigy 4 Pro Modded ISO

Then I uninstall everything and then used the Driver Cleaner to clean again... this time around didnt install the Creative Mediasource from the modded iso and working properly now... Again, thankx everyone~! Enjoying now

Jun 28, 2005, 01:15 AM	#1
sovietdoc DriverHeaven Lover Join Date: May 2005 Posts: 121 Rep Power: 0	Guide: How to install YouP Audigy4 drivers/software Okay, Ill start off imagining like you have just installed windows and your computer is clean. In the end I'll say what to do if you are installing without reinstalling windows. 1. You should have a CD with [color=red]Audigy4 ISO[/color] on a CD, of it may be mounted on a virtual drive. Also you should have the YouP Audigy4 Driver versions 1.00, 1.01 or 1.02. After the windows install, install your chipset drivers and etc, then reboot and install any Service Packs but don't go to the windows update just yet. After the service pack installation, reboot and double click on the [color=red]Audigy 4 1.02 driver[/color] (i'll use 1.02 as an example). Go through it by clicking "next." A page should apper with different music presets (Music I, II and Games/DVD.) Select the one that fits you best (description of each can be found on the page before that in the installation program). Make sure when you install these drivers you install the Audio Console as well. After the driver installtion is successful, restart your PC. 2. After your computer was restarted, dont go into the Audio Console just yet to setup your system. Put in the [color=black][color=red]Audigy 4 CD[/color] (iso)[/color] with drivers. When it asks you which type of instal[color=black]l[/color] you want, always click "Custom." In the custom installation you can install anything you want but make sure "Audio Console" and "Drivers" are unchecked because you already have them. After the install, don't forget to reboot your PC. 3. After both of those have been installed, make sure you get the "[color=red]Audigy 4 patch[/color]" (link in at the end of the thread). Replace your "SpkSet.exe" which is located in X:\Program Files\Creative\SBAudigy4\Speaker Settings, with the one from the patch package. Do the same thing for the file called "SurMixer.exe", it's located in X:\Program Files\Creative\SBAudigy4\Surround Mixer. I suggest rebooting after that but thats optional. 4. After replacing those two files, get the [color=red]Speaker Calibrator[/color] from the link below. Install it and reboot. After the reboot go to your Audio Console and configure everything. Don't forget to check Sound Properties in the Control Panel, make sure speakers there are set to whatever you're using. (2.1, 4.1, 5.1 and etc.) Because a lot of time Audio Console says "5.1" for example, but in windows they're still "Desktop Stereo Speakers". Run the speaker Calibrator if you have to configure your speakers "Perfectly" lol. I also suggest going to the www.sounblaster.com and downloading the patch for the Creative Entertainment Center from the Audigy 4 Pro support page, and the Media Source patch. They're not integrated into the Audigy 4 ISO so get them separately. Of course install them after you've installed everything else. For the people who didn't didn't reinstall windows, get the [color=red]Driver Cleaner[/color] from the link below and clean everything with it. Install it, then after running it choose to remove everything "Creative" out of the system and within a second it should be done. Just make sure you uninstall your Audigy Drivers/Software from the control panel, before cleaning with DriverCleaner. Then reboot after everything is cleaned, make sure "Creative" folder isn't in the Program FIles anymore, Search the registry as well for Creative Tech, and delete all those entries. Reboot again and follow all previous steps. For the people with huge shutdown delay, go to the Creative Entertainment Settings and disable it. Make sure you uncheck both "Enable" and "Enable When Windows Starts Up." [color=red]NOTE[/color] It's VERY importand that during installing everything you DO NOT change any of the default installation paths. If you do something might not work/crash. So, I warned you. [color=red]UPDATE [/color][color=black]Links have been updated as of 06/02/06 so it's working again [/color] Links: [color=#8000ff]http://www.cniti.com/soft/mc/2005-14/Audigy4Pro.rar[/color] - [color=red]AUDIGY 4 ISO[/color] http://ordorica.org/pax/YouP-PAX-A4v1.02.exe - [color=red]YOUP AUDIGY 4 v.1.02 Driver[/color] http://rapidshare.de/files/2144413/SpkCal_eng.zip.html -[color=red]SPEAKER CALIBRATOR[/color] http://allenlyk.webhour.biz/files/A4_Patch.7z - [color=red]AUDIGY 4 PATCH[/color] (SurMixer and SpkSet) Thanks to Leoboom http://members.home.nl/mclaren2000/downloads/DCProSetup_15.zip* - [color=red]Driver Cleaner[/color] P.S. Sorry for the spelling errors or if I didn't cover something. I'm just trying to help people out. __________________ Last edited by sovietdoc; Aug 23, 2006 at 05:17 AM.

Jun 28, 2005, 03:39 PM	#2
krvolok DriverHeaven Junior Member Join Date: Nov 2004 Location: Slovenia Posts: 45 Rep Power: 0	EDIT: NVM, I solved the problem. BTW, nice guide. __________________ Last edited by krvolok; Jun 28, 2005 at 05:06 PM.

Jun 29, 2005, 03:47 PM	#3
classic_leon HardwareHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,238 Rep Power: 0	Thanks buddy! __________________ Fashion keeps us alive. YouP-PAX Please visit http://www.A-PAX.co.uk to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.

Jun 29, 2005, 03:54 PM	#4
BiGBrOwNPimpsta HH's #1 Hustla and Pimp Join Date: Jan 2003 Location: The Dirty Dot Posts: 7,399 Rep Power: 84	had to bite my guide huh lol jk i was thinking about doing it good job __________________ Sound Blaster X-Fi Xtreme Music \| Logitech Z-5500 THX 5.1 Surround Sound Speakers \| 2 Lite-On 20x S-ATA Burners \| ATI TV Wonder Elite \| Logitech G7 Mouse \| Logitech MX5500 Bluetooth Keyboard

Jun 29, 2005, 04:44 PM	#5
classic_leon HardwareHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,238 Rep Power: 0	:d... __________________ Fashion keeps us alive. YouP-PAX Please visit http://www.A-PAX.co.uk to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.

Jun 29, 2005, 08:36 PM	#6
sovietdoc DriverHeaven Lover Join Date: May 2005 Posts: 121 Rep Power: 0	Thanks I just basically summarized what people were talking about in the "Audigy4 iso" thread. __________________

Jul 3, 2005, 05:13 AM	#7
rayraymond DriverHeaven Newbie Join Date: Jul 2005 Posts: 11 Rep Power: 0	I have installed this Driver for my Audigy 2, but i can't get the Surround Mixer, Graphics Equalizer, Audio Console and etc.. working!!!??? why is that? i have installed the Audigy 4 ISO, driver, A4_patch, speaker calibration. I download all the files from this forum, but not this page. any suggestions?

Jul 3, 2005, 11:50 PM	#8
sovietdoc DriverHeaven Lover Join Date: May 2005 Posts: 121 Rep Power: 0	Have you installed it all after reformatting your harddrive and reloading the OS? Just to make sure everything is clean. It could be a bad install or you didn't install it all after a clean installation. Remove all drivers/software and use the drive cleaner pro. Then after a reboot try following all these steps again and see if your new install will solve any problems. P.S. To uninstall the YouP a4 driver, open up your A4 driver setup and instead of selecting which driver to install, click uninstall the driver. DO NOT uninstall YouP driver manually from "remove programs" or in the Device Manager. __________________

Jul 4, 2005, 02:09 PM	#9
rayraymond DriverHeaven Newbie Join Date: Jul 2005 Posts: 11 Rep Power: 0	i didn't reinstall everything(os) for this soundcard. But after i installed the card with driver, the loading time(from "welcome" screen to the desktop) takes 70seconds, but if i use onboard sound it takes 4 seconds. so there is a huge delay.

Jul 4, 2005, 09:02 PM	#10
classic_leon HardwareHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,238 Rep Power: 0	The first loading windows is slow after install those drivers and then will be okay. __________________ Fashion keeps us alive. YouP-PAX Please visit http://www.A-PAX.co.uk to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.

Jul 5, 2005, 06:34 AM	#12
swatX ba\|\\|\\|ed Join Date: May 2004 Posts: 618 Rep Power: 0	yea.. pictures would be nice unfortunately i gave up on creative drivers long time ago... sad day indeed.. __________________ thx stick for the sig

Jul 5, 2005, 03:42 PM	#13
Radon DriverHeaven Newbie Join Date: Jul 2005 Posts: 1 Rep Power: 0	What's the default directory that the YouP-PAX-A4v1.02 gets installed? WinXP is asking to install the driver from a specific location...

Jul 5, 2005, 10:25 PM	#14
sovietdoc DriverHeaven Lover Join Date: May 2005 Posts: 121 Rep Power: 0	like C:\ProgramFiles\Creative\Audigy or something, Leon probably knows better on this one... __________________

Jul 8, 2005, 11:16 PM	#15
Chronosphere DriverHeaven Junior Member Join Date: Jul 2005 Posts: 26 Rep Power: 0	I did the upgrade on my Audigy 2 Platinum. For now, I installed the original ISO drivers, but an ANNOYING problem is still there (sorry for screaming). My computer still resets the speakers configuration to 2.1 everytime it boots. Annoying, since I own a set of S750's and I have to set my Audigy 2 to 6.1 EVERY TIME WINDOWS START. I SIMPLY HATE THIS (again, sorry for screamin). Question 1: Is there a way to fix this thing in to booting to 6.1 Always????????? Question 2: Are there any benefits of modding my A2 to an A4???? Thanks!

Jul 9, 2005, 07:16 AM	#16
sovietdoc DriverHeaven Lover Join Date: May 2005 Posts: 121 Rep Power: 0	Well, try unchecking the "Synchronize with Control Panel" option in Audido Console, reboot and go to the steaper setup options in the windows control panel, set them to 6.1 or whatever. Then go to the Audio Console and make sure those are at 6.1 as well. That should work. Benefits are a slightly better sound quality and the "new look" on the software :P though there is more to it, thanks to the Audigy4 hack by YouP...so I suggest to try it out, you can always remove it if you won't like it. __________________

Jul 14, 2005, 08:47 AM	#17
leoboom DriverHeaven Newbie Join Date: Jul 2005 Posts: 4 Rep Power: 0	sorry, newbie here.. donno this question has been asked b4 or not.. just wanna know which is the best edit for me? (music edit I, music edit II or game edit) i listen to music a lot but i do play games too.. thanks!

Jul 14, 2005, 09:13 AM	#18
pigdog HardwareHeaven Senior Member Join Date: Jun 2003 Location: Sydney, Australia Posts: 466 Rep Power: 46	And I'm still hoping someone will come up with a working link for the Patch . . . . . . . __________________

Jul 14, 2005, 12:23 PM	#20
krvolok DriverHeaven Junior Member Join Date: Nov 2004 Location: Slovenia Posts: 45 Rep Power: 0	Here's another one: http://www.shrani.si/pics/a4_patch41036.avi [color=Red]Just rename the extension from "avi" to "7z" and extract. [/color] __________________

Jul 14, 2005, 10:12 PM	#22
sovietdoc DriverHeaven Lover Join Date: May 2005 Posts: 121 Rep Power: 0	I use Music Edit I and it works really good, I havent even tried Music II or other one. Try music edit I. But in case you're wondering whats the difference between each one of them, when you start Audigy4 Driver setip for YouP A1.02, the page before driver select page has the explanation which driver does what. __________________

Jul 30, 2005, 08:41 PM	#23
Bar81 DriverHeaven Lover Join Date: Feb 2005 Location: UAE Posts: 176 Rep Power: 0	Is there a working link to the speaker calibrator?

Jul 30, 2005, 11:02 PM	#24
Jof DriverHeaven Junior Member Join Date: Jan 2005 Posts: 22 Rep Power: 0	What is this speaker calibrator? In the THX console is also a speaker calibrator!

Aug 1, 2005, 08:13 AM	#25
sovietdoc DriverHeaven Lover Join Date: May 2005 Posts: 121 Rep Power: 0	Speaker calibrator is the tool to calibrate your surround speakers for the best audio experience. the THX one isnt what we are talking about. We are talking about the one located in "speaker settings" and none of the people with audigy 4 pack should have it. Though you can install it on top of audigy 4 pack without messing anything up. __________________

Aug 8, 2005, 08:11 PM	#26
ssgohan434 DriverHeaven Newbie Join Date: Aug 2005 Posts: 1 Rep Power: 0	What is the device manager supposed to display after the install is done correctly? Mine says Creative SB Audigy under the "Sound, Video, and Game Conrollers" tab in device manager. Also, the directory that we are supposed to replace the 2 files in is X:\Program Files\Creative\SBAudigy4\Speaker Settings , but for some reason for me its X:\Program Files\Creative\SBAudigy\Speaker Settings. There is no "4" after the SBAudigy folder name. Is this correct? Just making sure that i actually installed it correctly. thanks.

Aug 9, 2005, 01:10 AM	#27
vearn27 DriverHeaven Newbie Join Date: Aug 2005 Posts: 3 Rep Power: 0	Hello, I just bought myself a Audigy 2 ZS and then some friends recommending me to softmod it to Audigy 4 Pro for better sound quality I had read the guide here but I couldn't get the [color=red]AUDIGY 4 ISO [/color]and also [color=red]YOUP AUDIGY 4 v.1.02 Driver.[/color] Is there any other links where I can download the 2 files? Then, there are certain parts that I don't understand and wish someone could help me to figure out: 1) For the YouP A4 driver, do I need v1.00 and v1.01 as well before I install v1.02 or just install v1.02 is enough? 2) And then how could I delete all the creative under my registry? I know I need to go Start --> Run --> Regedit to get to my system registry, but then any tips or guide to make the search easier? 3) I'm not installing in a clean OS, which means I just uninstall my current driver and then install this one, izzit alrite? Or is there particular steps I'll need to follow if I'm not installing in a clean OS? Thankx in advance...

Aug 9, 2005, 05:32 PM	#30
vearn27 DriverHeaven Newbie Join Date: Aug 2005 Posts: 3 Rep Power: 0	I successfully softmod my Audigy 2 ZS to Audigy 4 Pro... thankx a lot everyone When I first did it, I failed... perhaps coz I install the Creative Mediasource that comes inside the Audigy 4 Pro Modded ISO Then I uninstall everything and then used the Driver Cleaner to clean again... this time around didnt install the Creative Mediasource from the modded iso and working properly now... Again, thankx everyone~! Enjoying now