Using Audigy2 Updates on Audigy and Live!

Bedeox · Dec 22, 2002, 01:33 PM

Could you give a link to well-known, hard-to-find Compaq drivers?

I'll try to install them on my 98SE...
XP will stay with kX

RIV@NVX · Dec 22, 2002, 01:38 PM

Quote:

Originally posted by Bedeox
Could you give a link to well-known, hard-to-find Compaq drivers?

Here

Bedeox · Dec 22, 2002, 01:44 PM

Thanks, I'd find them anyway, but Compaq sites are a real mess.

<edit>
Hell, another 150 MB download...
My 100kb/s link is too slow for these things.
And I have to download DirectX 9...

</edit>

RIV@NVX · Dec 22, 2002, 01:52 PM

Quote:

Originally posted by Bedeox
Thanks, I'd find them anyway, but Compaq sites are a real mess.

<edit>
Hell, another 150 MB download...
My 100kb/s link is too slow for these things.
And I have to download DirectX 9...
</edit>

Use drivers only with some older apps... that's only thing I can suggest.

Blurayfan · Dec 22, 2002, 02:02 PM

Good Day Everybody

I decided to start this day by re-writing patch file
once again. I have added more ID codes to the patch.
It should now make these updates work for PCI 512
cards finally. Here is a copy of what has been changed

Original ID's: 02100002, 02100003, 02100004, 02100005,
ID's the Patch Adds: 02000051, 02000052, 02000053, 02000054, 02000055, 02000056, 02000057, 02000058, 00801061, 00801062, 00801064, 00801069, 0080106A, 0080106B, 00000020, 00000021, 0000002F, 00801022, 00801023, 00801025, 00801026, 00801027, 00801028, 00801029, 00801031, 00801032, 00801040, 00801050, 00801051, 00801071

DVDKingdom.

RIV@NVX · Dec 22, 2002, 02:10 PM

Quote:

Originally posted by DVDKingdom
Good Day Everybody

I decided to start this day by re-writing my patch file
once again. I have added more ID codes to the patch.
It should now make these updates work for PCI 512
cards finally. Here is a copy of what has been changed

Original ID's: 02100002, 02100003, 02100004, 02100005,
ID's the Patch Adds: 02000051, 02000052, 02000053, 02000054, 02000055, 02000056, 02000057, 02000058, 00801061, 00801062, 00801064, 00801069, 0080106A, 0080106B, 00000020, 00000021, 0000002F, 00801022, 00801023, 00801025, 00801026, 00801027, 00801028, 00801029, 00801031, 00801032, 00801040, 00801050, 00801051, 00801071

DVDKingdom.

Thanks! First post updated.
BTW, download kX 3528 to see if there are more device IDs (they have 35 of them).

GFXdaniel · Dec 22, 2002, 02:32 PM

Hi guys,

Thanks for a couple of wonderful drivers. But there´s just a small problem. Cant get these to work.

Should start with to say that I use WinXP Sp1 and using a Audigy 1 OEM card.

This I have done,

1. Installed hacked Audigy 2 drivers and Apps. Did download the CD and extracted it to my harddrive. Did install the ctcomp in here. Installed drivers and apps thru CTrun/start. Reboot.

The sound did work but only if I tested the speakers or used the calibrator program.

Sorry for not getting this. But could you explain it again how to install these drivers.

dwarfy · Dec 22, 2002, 02:34 PM

Sorry for my lack of english (a poor french boy

)

These drivers (.323) don't work with my Live! (one of the first board, I don't know CTxxx the value of xxx, I don't have time to open my case

), I keep using .283 (juste the drivers, no apps installed). I could install the .323 drivers, my sb live! seems to be ok in the device manager but i get an error when i try to play any sound.

I'll try tonight on my first computer which have a more recent live! (a 1024) and which actually run with .283, audioHQ and SurroundMixer (from .253 driver pack). I'll post here if the .323 drivers works with this board.

both are under XP sp1 and all windows update and dx9.
the one with the old sb live! is a celeron600@1054
the one with the live! 1024 is a p4 1.8@2.7

calli · Dec 22, 2002, 02:46 PM

anyone know if the livedrives are detected and work? mine doesnt i have sbl plat..5.1 and everything works except eax console... live drive ... and speaker settings? does the compaq drivers fix this ? any info would be appreciated!!!

RIV@NVX · Dec 22, 2002, 02:59 PM

@GFXdaniel:
Have you installed these updates?
They work on my Audigy OEM without problems...
Speaker setup? And have you uninstalled old drivers correctly (this usually causes problems).
@dwarfy:
"my sb live! seems to be ok in the device manager but i get an error when i try to play any sound."
Hmmm... this might be the wrong installation - can you check what Device Manager says about it (under Driver tab)?
@calli:
Have any drivers you tried (ever) worked with Live! Drive?

dwarfy · Dec 22, 2002, 03:06 PM

Quote:

Originally posted by RIV@NVX

@dwarfy:
Hmmm... this might be the wrong installation - can you check what Device Manager says about it (under Driver tab)?

exactly the same as that (but with .323 version of course) :

So it seems really Ok, however, I could'nt play any sound w/ these .323 so ...

I don't remember the error message when i try to play some sound (i'm back to .283, and i don't want to reinstall .323)

I will try in a couple of hour (when i'll be back in my home) these .323 on the live! 1024 of my computer, and let's see

RIV@NVX · Dec 22, 2002, 03:11 PM

Seems like CL shitters want to abandon Live! series (especially old ones).
Maybe error message can help me see something, but I doubt that I can make a lot.
Maybe I will need to start making tweaked drivers for Live!/Audigy1/Audigy2...

dwarfy · Dec 22, 2002, 03:17 PM

So, if it could help ....

I reinstall these driver, take some screenshots and take a look at the CTxxxx number.

be back in 20 minutes

EDIT : hum, really sorry about my precedent post, but finally ... .323 works even with this old card

I don't know why my previous installation seems ok but error when try playing sound, but now it works perfect, really sorry. (CT4670card).

So, I'm sure they will work too on my more recent live! 1024

Candyman · Dec 22, 2002, 03:27 PM

Here is my problem with these....

They installed fine...no hitches, however, now I do not get 4 speaker output. If I play my MP3z using winamp, only the front speakers work and not the rear. If I go to test the speakers using the speaker settings, all four work when doing the test.

Is this a Winamp 3 only incident? No other program seems to like the 4 channel either.

Anyone else have this?

RIV@NVX · Dec 22, 2002, 03:51 PM

Quote:

Originally posted by Candyman
Here is my problem with these....

They installed fine...no hitches, however, now I do not get 4 speaker output. If I play my MP3z using winamp, only the front speakers work and not the rear. If I go to test the speakers using the speaker settings, all four work when doing the test.

Is this a Winamp 3 only incident? No other program seems to like the 4 channel either.

Anyone else have this?

There was a guy with PCI512 that had the same problem...
Try setting the speaker setup in control panel and in Creative Speaker Setup (if you are able to run it).

RIV@NVX · Dec 22, 2002, 03:53 PM

Quote:

Originally posted by dwarfy
EDIT : hum, really sorry about my precedent post, but finally ... .323 works even with this old card

I don't know why my previous installation seems ok but error when try playing sound, but now it works perfect, really sorry. (CT4670card).

So, I'm sure they will work too on my more recent live! 1024

I am glad it works... no problem, it was just strange that 283 did and this one doesn't.
I hope it will work too.
What about apps - have you tried them (they work to some people, and don't to some other)?

calli · Dec 22, 2002, 04:33 PM

ya... alla things worked before.. i was wondering if there was a seperate driver package i could get to fix the livedrive... i have fixed the speaker selection and workin on gettin the eax console working.....any thought on the livedrive?

Veky · Dec 22, 2002, 04:51 PM

Hello fellow Croat.

I got a SBLive Value and haven't tried these hacked drivers yet but that's ok, I'm using the .283 drivers like dwarfy and they work like a treat.

Do those .323 offer any improvement?

Btw, lijepo je vidjeti da i mi Hrvati nešto radimo.

Phantastica · Dec 22, 2002, 05:03 PM

Quote:

Originally posted by calli
ya... alla things worked before.. i was wondering if there was a seperate driver package i could get to fix the livedrive... i have fixed the speaker selection and workin on gettin the eax console working.....any thought on the livedrive?

How did you manage to get the speaker settings going?

calli · Dec 22, 2002, 05:11 PM

i just got out my old cd and installed the speaker thing from it... stiill lookin for livedrive drivers tho.....

Blurayfan · Dec 22, 2002, 05:12 PM

Quote:

Originally posted by RIV@NVX
Thanks! First post updated.
BTW, download kX 3528 to see if there are more device IDs (they have 35 of them).

I have download the KX project 3528 codes they use
are registry codes for the inf files. the codes I've used are
internal hardware Id on the cards themselves. I will keep
looking for more codes. I think one is missing because I
have 34.

RIV@NVX · Dec 22, 2002, 05:23 PM

Quote:

Originally posted by Veky
Hello fellow Croat. I got a SBLive Value and haven't tried these hacked drivers yet but that's ok, I'm using the .283 drivers like dwarfy and they work like a treat. Do those .323 offer any improvement?

Btw, lijepo je vidjeti da i mi Hrvati nešto radimo.

Well (Pa, èuj...

), these 323 drivers work better then previous ones.
I guess they aren't a threat if you are using .283 without problems.

RIV@NVX · Dec 22, 2002, 05:25 PM

Quote:

Originally posted by DVDKingdom
I have download the KX project 3528 codes they use
are registry codes for the inf files. the codes I've used are
internal hardware Id on the cards themselves. I will keep
looking for more codes. I think one is missing because I
have 34.

Then you have all of them (I guess):

Code:

EMU10KX.DeviceDesc1="kX 10k1 Audio - 5.1 Model SB0060"
EMU10KX.DeviceDesc2="kX 10k1 Audio - Model CT4620"
EMU10KX.DeviceDesc3="kX 10k1 Audio - Model CT4670 Value"
EMU10KX.DeviceDesc4="kX 10k1 Audio - Model CT4760"
EMU10KX.DeviceDesc5="kX 10k1 Audio - Motherboard Model"
EMU10KX.DeviceDesc6="kX 10k1 Audio - Model CT4850 Value"
EMU10KX.DeviceDesc7="kX 10k1 Audio - Model CT4830 Value"
EMU10KX.DeviceDesc8="kX 10k1 Audio - Model CT4832 Value"
EMU10KX.DeviceDesc9="kX 10k1 Audio - Model CT4780 Value"
EMU10KX.DeviceDesc10="kX 10k1 Audio - Model APS"
EMU10KX.DeviceDesc11="kX 10k1 Audio - 5.1 Model SB0101 Value"
EMU10KX.DeviceDesc12="kX 10k1 Audio - 5.1 Model SB0103"
EMU10KX.DeviceDesc13="kX 10k1 Audio - 5.1 Model SB0105"
EMU10KX.DeviceDesc14="kX 10k1 Audio - Model CT4831 Value"
EMU10KX.DeviceDesc15="kX 10k1 Audio - Model CT4870 Value"
EMU10KX.DeviceDesc16="kX 10k1 Audio - Model CT4871 Value"
EMU10KX.DeviceDesc17="kX 10k1 Audio - Model PCI512 CT4790 OEM"
EMU10KX.DeviceDesc18="kX 10k1 Audio - 5.1 Model SB0100"
EMU10KX.DeviceDesc19="kX 10k1 Audio - 5.1 Model SB0102"
EMU10KX.DeviceDesc20="kX 10k1 Audio - 5.1 Model SB0150"
EMU10KX.DeviceDesc21="kX 10k1 Audio - Motherboard Model"
EMU10KX.DeviceDesc22="kX 10k1 Audio - Motherboard Model"
EMU10KX.DeviceDesc23="kX 10k2 Audio - Model CT0070"
EMU10KX.DeviceDesc24="kX 10k2 Audio - Model CT0072"
EMU10KX.DeviceDesc25="kX 10k2 Audio - Model SB0090"
EMU10KX.DeviceDesc26="kX 10k2 Audio - Model CT0092"
EMU10KX.DeviceDesc27="kX 10k1 Audio - Model PCI512 CT4820"
EMU10KX.DeviceDesc28="kX 10k1 Audio - Model PCI256 CT4890"
EMU10KX.DeviceDesc29="kX 10k1 Audio - Model PCI256 CT4891"
EMU10KX.DeviceDesc30="kX 10k1 Audio - Model PCI256 CT4893"
EMU10KX.DeviceDesc31="kX 10k1 Audio - Model CT4872"
EMU10KX.DeviceDesc32="kX 10k1 Audio - Model CT0061"
EMU10KX.DeviceDesc33="kX 10k2 Audio - Model CT4820"
EMU10KX.DeviceDesc34="kX 10k1 Audio - Model CT0060"

+ 10k1 General and 10k2 General...

You have 34? Audigy2 Included? Because, I see APS here, but I doubt that you have APS support. Maybe they miss some?

Veky · Dec 22, 2002, 05:26 PM

Quote:

Originally posted by RIV@NVX
Well (Pa, èuj...), these 323 drivers work better then previous ones.
I guess they aren't a threat if you are using .283 without problems.

I just wanted to try them and realised that I gotta DL a 120mb file. Too much for my 56k.

RIV@NVX · Dec 22, 2002, 05:27 PM

Quote:

Originally posted by Veky
I just wanted to try them and realised that I gotta DL a 120mb file. Too much for my 56k.

Wait, you already have 283 ones.

Veky · Dec 22, 2002, 05:31 PM

Quote:

Originally posted by RIV@NVX
Wait, you already have 283 ones.

Well yeah, I got them from Drivers Center, they were about 25mb.

Wait, are you telling me that I've been running Audigy 2 drivers all this time? Lol

RIV@NVX · Dec 22, 2002, 05:37 PM

Quote:

Originally posted by Veky
Well yeah, I got them from Drivers Center, they were about 25mb.

Wait, are you telling me that I've been running Audigy 2 drivers all this time? Lol

So, just take the updated drivers, not the apps updates (skip a few steps).

tazdevl · Dec 22, 2002, 05:39 PM

Just an FYI, but I have an A2 and installed the driver update after installing DX9. Audio is cutting off completely after a few minutes of audio related activity.

Good to know creative still can't code drivers worth a damn.

RIV@NVX · Dec 22, 2002, 05:43 PM

Quote:

Originally posted by tazdevl
Just an FYI, but I have an A2 and installed the driver update after installing DX9. Audio is cutting off completely after a few minutes of audio related activity.

Good to know creative still can't code drivers worth a damn.

I can't believe that it works excellent on my Audigy1. Hmmm.... and it is actually for Audigy2 -

Blurayfan · Dec 22, 2002, 05:44 PM

Quote:

Originally posted by RIV@NVX
Then you have all of them (I guess):

Code:

EMU10KX.DeviceDesc1="kX 10k1 Audio - 5.1 Model SB0060" EMU10KX.DeviceDesc2="kX 10k1 Audio - Model CT4620" EMU10KX.DeviceDesc3="kX 10k1 Audio - Model CT4670 Value" EMU10KX.DeviceDesc4="kX 10k1 Audio - Model CT4760" EMU10KX.DeviceDesc5="kX 10k1 Audio - Motherboard Model" EMU10KX.DeviceDesc6="kX 10k1 Audio - Model CT4850 Value" EMU10KX.DeviceDesc7="kX 10k1 Audio - Model CT4830 Value" EMU10KX.DeviceDesc8="kX 10k1 Audio - Model CT4832 Value" EMU10KX.DeviceDesc9="kX 10k1 Audio - Model CT4780 Value" EMU10KX.DeviceDesc10="kX 10k1 Audio - Model APS" EMU10KX.DeviceDesc11="kX 10k1 Audio - 5.1 Model SB0101 Value" EMU10KX.DeviceDesc12="kX 10k1 Audio - 5.1 Model SB0103" EMU10KX.DeviceDesc13="kX 10k1 Audio - 5.1 Model SB0105" EMU10KX.DeviceDesc14="kX 10k1 Audio - Model CT4831 Value" EMU10KX.DeviceDesc15="kX 10k1 Audio - Model CT4870 Value" EMU10KX.DeviceDesc16="kX 10k1 Audio - Model CT4871 Value" EMU10KX.DeviceDesc17="kX 10k1 Audio - Model PCI512 CT4790 OEM" EMU10KX.DeviceDesc18="kX 10k1 Audio - 5.1 Model SB0100" EMU10KX.DeviceDesc19="kX 10k1 Audio - 5.1 Model SB0102" EMU10KX.DeviceDesc20="kX 10k1 Audio - 5.1 Model SB0150" EMU10KX.DeviceDesc21="kX 10k1 Audio - Motherboard Model" EMU10KX.DeviceDesc22="kX 10k1 Audio - Motherboard Model" EMU10KX.DeviceDesc23="kX 10k2 Audio - Model CT0070" EMU10KX.DeviceDesc24="kX 10k2 Audio - Model CT0072" EMU10KX.DeviceDesc25="kX 10k2 Audio - Model SB0090" EMU10KX.DeviceDesc26="kX 10k2 Audio - Model CT0092" EMU10KX.DeviceDesc27="kX 10k1 Audio - Model PCI512 CT4820" EMU10KX.DeviceDesc28="kX 10k1 Audio - Model PCI256 CT4890" EMU10KX.DeviceDesc29="kX 10k1 Audio - Model PCI256 CT4891" EMU10KX.DeviceDesc30="kX 10k1 Audio - Model PCI256 CT4893" EMU10KX.DeviceDesc31="kX 10k1 Audio - Model CT4872" EMU10KX.DeviceDesc32="kX 10k1 Audio - Model CT0061" EMU10KX.DeviceDesc33="kX 10k2 Audio - Model CT4820" EMU10KX.DeviceDesc34="kX 10k1 Audio - Model CT0060"

+ 10k1 General and 10k2 General...

You have 34? Audigy2 Included? Because, I see APS here, but I doubt that you have APS support. Maybe they miss some?

Yes I do have 34, Audigy 2 included. I don't think it does have
APS support. Here is how it breaks down.

For Audigy 2: ID = 02100002, 02100003, 02100004, 02100005

For Audigy 1: ID = 02000051, 02000052, 02000053, 02000054, 02000055, 02000056, 02000057, 02000058

For SBLive! 5.1: ID = 00801061, 00801062, 00801064, 00801069, 0080106A, 0080106B

For SBLive!: ID = 00000020, 00000021, 0000002F, 00801022, 00801025, 00801026, 00801027, 00801028, 00801029, 00801031, 00801032, 00801040, 00801050

For SB 512: ID = 00801023, 00801051, 00801071

Dec 22, 2002, 01:33 PM	#31
Bedeox DriverHeaven Newbie Join Date: Dec 2002 Posts: 10 Rep Power: 0	Could you give a link to well-known, hard-to-find Compaq drivers? I'll try to install them on my 98SE... XP will stay with kX Last edited by Bedeox; Dec 22, 2002 at 01:40 PM.

Dec 22, 2002, 02:02 PM	#35
Blurayfan HardwareHeaven Lover Join Date: Jul 2002 Location: USA Posts: 178 Rep Power: 0 System Specs	Installer Patch 4.0 Now Ready Good Day Everybody I decided to start this day by re-writing patch file once again. I have added more ID codes to the patch. It should now make these updates work for PCI 512 cards finally. Here is a copy of what has been changed Original ID's: 02100002, 02100003, 02100004, 02100005, ID's the Patch Adds: 02000051, 02000052, 02000053, 02000054, 02000055, 02000056, 02000057, 02000058, 00801061, 00801062, 00801064, 00801069, 0080106A, 0080106B, 00000020, 00000021, 0000002F, 00801022, 00801023, 00801025, 00801026, 00801027, 00801028, 00801029, 00801031, 00801032, 00801040, 00801050, 00801051, 00801071 DVDKingdom. Last edited by Blurayfan; Dec 22, 2002 at 02:08 PM.

Dec 22, 2002, 02:32 PM	#37
GFXdaniel DriverHeaven Newbie Join Date: Dec 2002 Posts: 6 Rep Power: 0	cant get them to work. Hi guys, Thanks for a couple of wonderful drivers. But there´s just a small problem. Cant get these to work. Should start with to say that I use WinXP Sp1 and using a Audigy 1 OEM card. This I have done, 1. Installed hacked Audigy 2 drivers and Apps. Did download the CD and extracted it to my harddrive. Did install the ctcomp in here. Installed drivers and apps thru CTrun/start. Reboot. The sound did work but only if I tested the speakers or used the calibrator program. Sorry for not getting this. But could you explain it again how to install these drivers. Last edited by GFXdaniel; Dec 22, 2002 at 02:39 PM.

Dec 22, 2002, 02:59 PM	Thread Starter #40
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 67 System Specs	@GFXdaniel: Have you installed these updates? They work on my Audigy OEM without problems... Speaker setup? And have you uninstalled old drivers correctly (this usually causes problems). @dwarfy: "my sb live! seems to be ok in the device manager but i get an error when i try to play any sound." Hmmm... this might be the wrong installation - can you check what Device Manager says about it (under Driver tab)? @calli: Have any drivers you tried (ever) worked with Live! Drive? __________________ -- Vedran

Dec 22, 2002, 03:11 PM	Thread Starter #42
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 67 System Specs	Seems like CL shitters want to abandon Live! series (especially old ones). Maybe error message can help me see something, but I doubt that I can make a lot. Maybe I will need to start making tweaked drivers for Live!/Audigy1/Audigy2... __________________ -- Vedran

Dec 22, 2002, 01:44 PM	#33
Bedeox DriverHeaven Newbie Join Date: Dec 2002 Posts: 10 Rep Power: 0	Thanks, I'd find them anyway, but Compaq sites are a real mess. <edit> Hell, another 150 MB download... My 100kb/s link is too slow for these things. And I have to download DirectX 9... </edit>

Dec 22, 2002, 02:34 PM	#38
dwarfy DriverHeaven Junior Member Join Date: Dec 2002 Posts: 38 Rep Power: 0	Sorry for my lack of english (a poor french boy ) These drivers (.323) don't work with my Live! (one of the first board, I don't know CTxxx the value of xxx, I don't have time to open my case ), I keep using .283 (juste the drivers, no apps installed). I could install the .323 drivers, my sb live! seems to be ok in the device manager but i get an error when i try to play any sound. I'll try tonight on my first computer which have a more recent live! (a 1024) and which actually run with .283, audioHQ and SurroundMixer (from .253 driver pack). I'll post here if the .323 drivers works with this board. both are under XP sp1 and all windows update and dx9. the one with the old sb live! is a celeron600@1054 the one with the live! 1024 is a p4 1.8@2.7

Dec 22, 2002, 02:46 PM	#39
calli DriverHeaven Newbie Join Date: Dec 2002 Posts: 3 Rep Power: 0	anyone know if the livedrives are detected and work? mine doesnt i have sbl plat..5.1 and everything works except eax console... live drive ... and speaker settings? does the compaq drivers fix this ? any info would be appreciated!!!

Dec 22, 2002, 03:17 PM	#43
dwarfy DriverHeaven Junior Member Join Date: Dec 2002 Posts: 38 Rep Power: 0	So, if it could help .... I reinstall these driver, take some screenshots and take a look at the CTxxxx number. be back in 20 minutes EDIT : hum, really sorry about my precedent post, but finally ... .323 works even with this old card I don't know why my previous installation seems ok but error when try playing sound, but now it works perfect, really sorry. (CT4670card). So, I'm sure they will work too on my more recent live! 1024 Last edited by dwarfy; Dec 22, 2002 at 03:24 PM.

Dec 22, 2002, 03:27 PM	#44
Candyman [DH] Lover! Join Date: May 2002 Location: Toronto, Canada Posts: 284 Rep Power: 0	Here is my problem with these.... They installed fine...no hitches, however, now I do not get 4 speaker output. If I play my MP3z using winamp, only the front speakers work and not the rear. If I go to test the speakers using the speaker settings, all four work when doing the test. Is this a Winamp 3 only incident? No other program seems to like the 4 channel either. Anyone else have this? __________________ AMD Athlon XP 1700+ @ 2.53GHz Abit NF7-S v.2 Thermalright SP-97 w/ TT Smart Fan 2 2 x 512MB GeIL PC3500 Platinum DDR 2 x 120GB WD HDD - RAID-0 2 x 80GB Barracuda V HDD - RAID-0 ATI Radeon AIW 9800PRO SB Audigy 2 HP L2335 23" LCD (DVI-D) WinXP Pro SP2

Dec 22, 2002, 04:33 PM	#47
calli DriverHeaven Newbie Join Date: Dec 2002 Posts: 3 Rep Power: 0	ya... alla things worked before.. i was wondering if there was a seperate driver package i could get to fix the livedrive... i have fixed the speaker selection and workin on gettin the eax console working.....any thought on the livedrive?

Dec 22, 2002, 04:51 PM	#48
Veky DriverHeaven Junior Member Join Date: Dec 2002 Location: Croatia Posts: 69 Rep Power: 0	Hello fellow Croat. I got a SBLive Value and haven't tried these hacked drivers yet but that's ok, I'm using the .283 drivers like dwarfy and they work like a treat. Do those .323 offer any improvement? Btw, lijepo je vidjeti da i mi Hrvati nešto radimo.

Dec 22, 2002, 05:11 PM	#50
calli DriverHeaven Newbie Join Date: Dec 2002 Posts: 3 Rep Power: 0	i just got out my old cd and installed the speaker thing from it... stiill lookin for livedrive drivers tho.....

Dec 22, 2002, 05:39 PM	#58
tazdevl DriverHeaven Addict Join Date: May 2002 Location: Bay Area, CA Posts: 310 Rep Power: 0	Just an FYI, but I have an A2 and installed the driver update after installing DX9. Audio is cutting off completely after a few minutes of audio related activity. Good to know creative still can't code drivers worth a damn. __________________ RIG: P4 2.6C, Thermalright SP94/Panaflo 92MM M1A, IC7 Max3, Swifty MCX159, 1GB Geil PC4000 Ultra Plat, Modded Radeon 8500, Audigy 2, 2X WD Raptor RAID 0, WD 250GB SE, Plex 708A, 166SDVD, LianLi PC75, WinXP Pro SP1, Z680's.