Using Audigy2 Updates on Audigy and Live!

bernd007 · Dec 25, 2002, 11:23 PM

On the whole what are the advantages when using SB Audigy 2 drivers with a SB Audigy 1 Card?
DVD-Audio, Dolby Digital EX, more Stability?

Oscar · Dec 26, 2002, 09:13 AM

I have spent the whole day testing different combinations of application and driver revisions on my SB Live! 5.1 Platinum. Here are my findings:

1) Necrosis's Audigy2 CD Pack v5.12.1.283 + Audigy2 Official Driver Pack v5.12.1.323 = Condition 1

2) SoftPaq SP22563 (v5.12.1.253) + Mixed Driver Pack (pulling those from v5.12.1.323 and then overriding those in Necrosis's) = Condition 2

3) SoftPaq SP20920 (v5.12.1.444 Rev. B) + Mixed Driver Pack (pulling those from v5.12.1.323 and then overriding those in Necrosis's) = Condition 2

4) Offcial SB Live! DriverPack (v5.12.1.444) + Mixed Driver Pack (pulling those from v5.12.1.323 and then overriding those in Necrosis's) = Condition 2

5) Offcial SB Live! DriverPack (v5.12.1.444) + Drivers v5.12.1.283 = Condition 1

Condition 1

Are you kidding me!? These drivers were coded by [COLOR=crimson]Creative[/COLOR], you are NOT actually expecting them to work, are you???

Condition 2

With digital connection, only three channels (left, centre, right) were present in AudioHQ's testing mode. With analog connection, only four channels (left, right, rear left, rear right) were present in AudioHQ's testing mode.

S/PDIF was completely broken in movies, all PCM signals (Dolby Digital/DTS) could not be picked up by the receiver and were translated into high-pitch noises.

Even with the utilization of a software decoder (such as PowerDVD), the centre channel was still absent in both digital and analog modes (no dialog could be heard in movies, either).

EDIT RIV@NVX:
It is 323, not 321

Oscar · Dec 26, 2002, 09:39 AM

Applications & Drivers

6) Necrosis's Audigy2 CD Pack v5.12.1.283 = Condition 1

7) SoftPaq SP22563 (v5.12.1.253) = Condition 3

8) SoftPaq SP21636 (v5.12.2.252) = Condition 3

9) SoftPaq SP20920 (v5.12.1.444 Rev. B) = Condition 3

10) Offcial SB Live! DriverPack (v5.12.1.444) = Condition 3

Condition 3

There was a half-second delay in movie playback in about every 7 seconds or so. The card would sometimes fail to send DTS signals to the receiver (it's a Creative Inspire 5700, by the way), causing interruption or complete silence. The volume for headphone was also *way* too low.

I will post the best SB Live! drivers that I have tested so far in my next message... I find myself keep going back to these due to the incompetence of Creative Labs......

Oscar · Dec 26, 2002, 09:48 AM

Full Set of LiveWare3:
1. English (Default), Brazilian, Dutch, French, German, Italian, Spanish, Swedish; 334MB
2. English (Default), Korean, Traditional Chinese, Simplified Chinese, Japanese; 217MB

LiveWare3 WinXP Update: English

WDM Drivers v35.12: English (double-click on "upddrv2k.exe" to install)

(I have an English-only set of LiveWare3 which is around 57MB, but I couldn't find anywhere to put it online......)

RIV@NVX · Dec 26, 2002, 11:03 AM

You downloaded a lot - how many GB of files related to Creative drivers you have?
And BTW, have you ever tried kX?

Blurayfan · Dec 26, 2002, 02:04 PM

As you can see below Creative drivers do not support
DirectX 8.X or higher they only support DirectX 7.0
If anyone is having DirectSound problems, this is most likely
why.

Creative Current driver for Win2K/XP = 5.12.1.323

Quote:

Originally posted by Matth
4. - is a Win9x
5. - is a Win2000
6. - is a WinXP
- .10 - is DirectX 5.0
- .11 - is DirectX 6.0
- .12 - is DirectX 7.0
- .13 - is DirectX 8.X
- .14 - is DirectX 9.0

Here is where the info came from

Microsoft Windows Driver Version Classification

RIV@NVX · Dec 26, 2002, 02:14 PM

DVDKingdom, speaking of devices support, I think it is possible to support all devices that are supported by kX - I have been checking something, and what you need is subsys ID:

EMU10KX.DeviceDesc8="kX 10k1 Audio - Model CT4850 Value"

%EMU10KX.DeviceDesc8%=KX_EMU10KX, PCI\VEN_1102&DEV_0002&SUBSYS_805101102 - connection is obvious!

00811050

There are similar numbers, just you need to understand which ones to take. Try. OK?

BTW, where do you search for Device IDs?

EDIT:
TYPO fixed!

Blurayfan · Dec 26, 2002, 02:24 PM

Quote:

Originally posted by RIV@NVX
DVDKingdom, speaking of devices support, I think it is possible to support all devices that are supported by kX - I have been checking something, and what you need is subsys ID:

EMU10KX.DeviceDesc8="kX 10k1 Audio - Model CT4850 Value"

%EMU10KX.DeviceDesc8%=KX_EMU10KX, PCI\VEN_1102&DEV_0002&SUBSYS_80511102

00801050

There are similar numbers, just you need to understand which ones to take. Try. OK?

BTW, where do you search for Device IDs?

I get the Device ID's from Creative themselves.
I download some of their old driver updates and
took the codes from the ctcomp.dat in those drivers.

I will look into the Kx.inf today & try to add more cards.

Thanks for your info.

Matth · Dec 26, 2002, 02:27 PM

Not sure that the classification applies to Audio drivers .... ALL the WDM versions seem to be 5.x, even for Win98.

Ther may also be a GENERIC way to specify hardware - I've seen it in the INF for my Intel-based Network card

The SUBSYS part is not specified, only the VEN, DEV (and sometimes REV)
This may not be precise enough in this case though, as the cards are more complex and have more than one subsystem.

RIV@NVX · Dec 26, 2002, 02:30 PM

Quote:

Originally posted by Matth
Not sure that the classification applies to Audio drivers .... ALL the WDM versions seem to be 5.x, even for Win98.

Ther may also be a GENERIC way to specify hardware - I've seen it in the INF for my Intel-based Network card

The SUBSYS part is not specified, only the VEN, DEV (and sometimes REV)
This may not be precise enough in this case though, as the cards are more complex and have more than one subsystem.

Look at kx.inf for example:
EMU10KX.DeviceDesc35="kX 10k1 Audio - General"
EMU10KX.DeviceDesc36="kX 10k2 Audio - General"

%EMU10KX.DeviceDesc35%=KX_EMU10KX, PCI\VEN_1102&DEV_0002&CC_040100
%EMU10KX.DeviceDesc36%=KX_EMU10KX, PCI\VEN_1102&DEV_0004&CC_040100

There is no SUBSYS always...

RIV@NVX · Dec 26, 2002, 03:32 PM

Quote:

Originally posted by DVDKingdom
I get the Device ID's from Creative themselves.
I download some of their old driver updates and
took the codes from the ctcomp.dat in those drivers.

I will look into the Kx.inf today & try to add more cards.

Thanks for your info.

PM me for updated kX inf download...

EMU10KX.DeviceDesc1="kX 10k1 Audio - Model CT4670 Value"
EMU10KX.DeviceDesc2="kX 10k1 Audio - Model CT4620"
EMU10KX.DeviceDesc3="kX 10k1 Audio - Model M002/M003"
EMU10KX.DeviceDesc4="kX 10k1 Audio - Model CT4780 Value"
EMU10KX.DeviceDesc5="kX 10k1 Audio - Model CT1140 Value"
EMU10KX.DeviceDesc6="kX 10k1 Audio - Model CT4830 Value"
EMU10KX.DeviceDesc7="kX 10k1 Audio - Model CT4832 Value"
EMU10KX.DeviceDesc8="kX 10k1 Audio - Model CT4870 Value"
EMU10KX.DeviceDesc9="kX 10k1 Audio - Model CT4872"
EMU10KX.DeviceDesc10="kX 10k1 Audio - Model CT4831 Value"
EMU10KX.DeviceDesc11="kX 10k1 Audio - Model CT4871 Value"
EMU10KX.DeviceDesc12="kX 10k1 Audio - Model CT4760"
EMU10KX.DeviceDesc13="kX 10k1 Audio - Model CT4850 Value"
EMU10KX.DeviceDesc14="kX 10k1 Audio - Model CT0061"
EMU10KX.DeviceDesc15="kX 10k1 Audio - Model CT0060"
EMU10KX.DeviceDesc16="kX 10k1 Audio - 5.1 Model SB0060"
EMU10KX.DeviceDesc17="kX 10k1 Audio - 5.1 Model SB0100"
EMU10KX.DeviceDesc18="kX 10k1 Audio - 5.1 Model SB0102"
EMU10KX.DeviceDesc19="kX 10k1 Audio - 5.1 Model SB0101 Value"
EMU10KX.DeviceDesc20="kX 10k1 Audio - 5.1 Model SB0103"
EMU10KX.DeviceDesc21="kX 10k1 Audio - 5.1 Model SB0105"
EMU10KX.DeviceDesc22="kX 10k1 Audio - 5.1 Model SB0221"
EMU10KX.DeviceDesc23="kX 10k1 Audio - 5.1 Model SB0222"
EMU10KX.DeviceDesc24="kX 10k1 Audio - 5.1 Model SB0150"
EMU10KX.DeviceDesc25="kX 10k1 Audio - Motherboard Model"
EMU10KX.DeviceDesc26="kX 10k1 Audio - Motherboard Model"
EMU10KX.DeviceDesc27="kX 10k1 Audio - Motherboard Model"
EMU10KX.DeviceDesc28="kX 10k1 Audio - Model PCI256 CT4890"
EMU10KX.DeviceDesc29="kX 10k1 Audio - Model PCI256 CT4891"
EMU10KX.DeviceDesc30="kX 10k1 Audio - Model PCI256 CT4893"
EMU10KX.DeviceDesc31="kX 10k1 Audio - Model PCI512 CT4790 OEM"
EMU10KX.DeviceDesc32="kX 10k1 Audio - Model PCI512 CT4820"
EMU10KX.DeviceDesc33="kX 10k1 Audio - Model PCI512 CT4840"
EMU10KX.DeviceDesc34="kX 10k1 Audio - Model PCI512 SB0150"
EMU10KX.DeviceDesc35="kX 10k1 Audio - Model APS"
EMU10KX.DeviceDesc36="kX 10k2 Audio - Model CT4820"
EMU10KX.DeviceDesc37="kX 10k2 Audio - Model CT0070"
EMU10KX.DeviceDesc38="kX 10k2 Audio - Model CT0072"
EMU10KX.DeviceDesc39="kX 10k2 Audio - Model SB0090"
EMU10KX.DeviceDesc40="kX 10k2 Audio - Model SB0162"
EMU10KX.DeviceDesc41="kX 10k2 Audio - Model SB0092"
EMU10KX.DeviceDesc42="kX 10k2 Audio - Model SB0161"
EMU10KX.DeviceDesc43="kX 10k2 Audio - Model SB0192"
EMU10KX.DeviceDesc44="kX 10k2 Audio - Model SB0191"
EMU10KX.DeviceDesc45="kX 10k2 Audio - Model SB0091"
EMU10KX.DeviceDesc46="kX 10k2 Audio - Model SB0095"
EMU10KX.DeviceDesc47="kX 10k2 Audio - Model SB0240"
EMU10KX.DeviceDesc48="kX 10k2 Audio - Model SB0243"
EMU10KX.DeviceDesc49="kX 10k2 Audio - Model SB0242"
EMU10KX.DeviceDesc50="kX 10k2 Audio - Model SB0280"
EMU10KX.DeviceDesc51="kX 10k1 Audio - General"
EMU10KX.DeviceDesc52="kX 10k2 Audio - General"

Is that all? Found anything else?

RIV@NVX · Dec 26, 2002, 03:57 PM

Quote:

Originally posted by DVDKingdom
More ID Codes added to installer patch

New : SB Live 5.1: SB0221, SB0222
ID: 00801065, 0080106C

Here is the current list of supported cards

For SB Audigy 2 : SB0240, SB0243, SB0242, SB0280
ID = 02100002, 02100003, 02100004, 02100005

For SB Audigy : SB0090, SB0162, SB0092, SB0161, SB0192, SB0191, SB0091, SB0095
ID = 02000051, 02000052, 02000053, 02000054, 02000055, 02000056, 02000057, 02000058

For SBLive! : CT4670, CT4620, M002/M003, CT4780, CT1140, CT4830, CT4832, CT4870, CT4872, CT4831, CT4871, CT4760, CT4850
ID = 00000020, 00000021, 0000002F, 00801022, 00801025, 00801026, 00801027, 00801028, 00801029, 00801031, 00801032, 00801040, 00801050

For SBLive! 5.1 : SB0060, SB0100, SB0102, SB0101, SB0103, SB0105, SB0221, SB0222
ID = 00801061, 00801062, 00801064, 00801069, 0080106A, 0080106B, 0080106C, 00801065

For SBPCI 512 : CT4790, CT4840, SB0150
ID = 00801023, 00801051, 00801071

Well, kX driver says that SB0150 is Live 5.1... Hmmmm....

Blurayfan · Dec 26, 2002, 04:07 PM

I was able to update the patch to include 4 more cards.

SoundBlaster Audigy Series:

SB0230 = 02000059
SB0231 = 0200005A
SB0232 = 0200005B
SB0238 = 0200005C

RIV@NVX · Dec 26, 2002, 04:43 PM

Quote:

Originally posted by DVDKingdom
I was able to update the patch to include 4 more cards.

SoundBlaster Audigy Series:

SB0230 = 02000059
SB0231 = 0200005A
SB0232 = 0200005B
SB0238 = 0200005C

Audigy1? Well, nice!

Blurayfan · Dec 26, 2002, 04:45 PM

Quote:

Originally posted by RIV@NVX
Audigy1? Well, nice!

Yes Audigy 1. I'm still trying to dig up more models
of PCI512, Live 5.1. I will also re-test patch with
the new full multi-lang CD.

dwarfy · Dec 26, 2002, 05:04 PM

I'm downloading the audigy2 mulilangual pack (398mo on .ru ftp site).

all i nedd is to use the ctcomp patch anb see if works with my sb live! and my french OS ?

or is it sure it'll not work with this card, even with multilingual support ?

Necrosis · Dec 26, 2002, 06:09 PM

I can't help but look at all this effort to make these drivers work on older cards commendable. However, it is a big reason why Creative sucks too. I guess I just have personal limits as to how much BS I can tolerate to get something to work right.

Good Luck

Blurayfan · Dec 26, 2002, 06:57 PM

Many new cards supported.
Too Many to list.

Here what still not supported

CT4820
CT0070
CT0072
APS
PCI256 cards

Installer Patch 5.0

Thank You RIV@NVX for the updated kx.inf

dwarfy · Dec 26, 2002, 08:03 PM

the audigy2.zip of 398mo is broken.

after 3 downloads, I can't open it (winzip, rar, ace > archive is corrupted)

manuel2k · Dec 26, 2002, 09:30 PM

Quote:

Originally posted by dwarfy
the audigy2.zip of 398mo is broken.

after 3 downloads, I can't open it (winzip, rar, ace > archive is corrupted)

no it isn't. I've downloaded + installed it!

no probs here

btw it's 387 mb

Ghungha · Dec 26, 2002, 09:50 PM

I've installed here, portuguese drivers, running fine with all updates.

But i had to install each soft separately, because patch didn't work here.

Blurayfan · Dec 26, 2002, 10:34 PM

Quote:

Originally posted by Ghungha
But i had to install each soft separately, because patch didn't work here.

1. What is your cards model number?
2. Card Family IE (Live, Audigy, etc.)?

It might not be on patch file if not I will
try to update it.

Thanks in advance.

DVDKingdom

Ghungha · Dec 26, 2002, 10:36 PM

The patch works when i use the old (only english) pack.

Blurayfan · Dec 26, 2002, 10:41 PM

Quote:

Originally posted by Ghungha
The patch works when i use the old (only english) pack.

The reason I ask is because I've just uploaded
Installer Patch 5.0 which has more cards & was
tested on the new Multi-Lang pack.

I've tested 2 langs so far besides english
spanish, dutch.

birgirpall · Dec 26, 2002, 10:42 PM

Quote:

Originally posted by DVDKingdom
Many new cards supported.
Too Many to list.

Here what still not supported

CT4820
CT0070
CT0072
APS
PCI256 cards

Installer Patch 5.0

Thank You RIV@NVX for the updated kx.inf

oky, i'm at a loss here, i've got a Live! Value card and i get stutters in bf1942

where do i download the file on which to apply the ctcomp.exe?

Blurayfan · Dec 26, 2002, 10:46 PM

Quote:

Originally posted by birgirpall
oky, i'm at a loss here, i've got a Live! Value card and i get stutters in bf1942

where do i download the file on which to apply the ctcomp.exe?

You apply the ctcomp.exe file to

"\Audio\Setup\" on the full CD or

main directory from the driver update file mentioned the 1st
post of this thread.

Oscar · Dec 26, 2002, 11:01 PM

Quote:

Originally posted by RIV@NVX
You downloaded a lot - how many GB of files related to Creative drivers you have?
And BTW, have you ever tried kX?

LoL

Yes, I have. I've even donated to the kX Project once. I didn't have much luck getting it to work last time around though... (The problem was mainly the Digital PIN connection, I reckon.) I will probably test the latest version today and see how it goes.

Oscar · Dec 26, 2002, 11:04 PM

Quote:

Originally posted by Necrosis
I can't help but look at all this effort to make these drivers work on older cards commendable. However, it is a big reason why Creative sucks too. I guess I just have personal limits as to how much BS I can tolerate to get something to work right.

Good Luck

You have been doing great, my friend. The fault is Creative's, not yours. I would like to add my thanks for your effort as a community member, as well

RIV@NVX & DVDKingdom > Thank you for your effort, too

dwarfy · Dec 26, 2002, 11:55 PM

hum. Sorry, after 4 download the .zip of 687mo is NOT damaged effectivly.

so, cuz my english is not so fluent (it's a bit hard for me to read the topic completly

), now all I need is to apply ctcomp to this pack and try if the apps work w/ my live! ?

thanks.

EDIT : 2025 files on zip file, 1761 after dezip :| the rest is CRC ... after 4 downloads ... I think i'll keep .253 softs and .323 drivers ...

MeierElsewhere · Dec 27, 2002, 12:00 AM

As there is a link for the Audigy 2 CD posted by RIV@NVX I think I may be allowed to ask for a link to the Multilanguage Audigy 2 CD.

I would really like to install it in my language.

Can anyone pm me a link for it?

Another question is if the multilanguage version will work with DVDKingdom´s patch...

Thanks for any help!

Regards

ME

Dec 25, 2002, 11:23 PM	#121
bernd007 DriverHeaven Newbie Join Date: Dec 2002 Posts: 1 Rep Power: 0	Advantages On the whole what are the advantages when using SB Audigy 2 drivers with a SB Audigy 1 Card? DVD-Audio, Dolby Digital EX, more Stability?

Dec 26, 2002, 09:13 AM	#122
Oscar DriverHeaven Junior Member Join Date: Dec 2002 Location: GVA, Canada Posts: 47 Rep Power: 0	I have spent the whole day testing different combinations of application and driver revisions on my SB Live! 5.1 Platinum. Here are my findings: 1) Necrosis's Audigy2 CD Pack v5.12.1.283 + Audigy2 Official Driver Pack v5.12.1.323 = Condition 1 2) SoftPaq SP22563 (v5.12.1.253) + Mixed Driver Pack (pulling those from v5.12.1.323 and then overriding those in Necrosis's) = Condition 2 3) SoftPaq SP20920 (v5.12.1.444 Rev. B) + Mixed Driver Pack (pulling those from v5.12.1.323 and then overriding those in Necrosis's) = Condition 2 4) Offcial SB Live! DriverPack (v5.12.1.444) + Mixed Driver Pack (pulling those from v5.12.1.323 and then overriding those in Necrosis's) = Condition 2 5) Offcial SB Live! DriverPack (v5.12.1.444) + Drivers v5.12.1.283 = Condition 1 Condition 1 Are you kidding me!? These drivers were coded by [COLOR=crimson]Creative[/COLOR], you are NOT actually expecting them to work, are you??? Condition 2 With digital connection, only three channels (left, centre, right) were present in AudioHQ's testing mode. With analog connection, only four channels (left, right, rear left, rear right) were present in AudioHQ's testing mode. S/PDIF was completely broken in movies, all PCM signals (Dolby Digital/DTS) could not be picked up by the receiver and were translated into high-pitch noises. Even with the utilization of a software decoder (such as PowerDVD), the centre channel was still absent in both digital and analog modes (no dialog could be heard in movies, either). EDIT RIV@NVX: It is 323, not 321 Last edited by RIV@NVX; Dec 26, 2002 at 10:55 AM.

Dec 26, 2002, 11:03 AM	Thread Starter #125
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 67 System Specs	You downloaded a lot - how many GB of files related to Creative drivers you have? And BTW, have you ever tried kX? __________________ -- Vedran

Dec 26, 2002, 02:14 PM	Thread Starter #127
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,476 Rep Power: 67 System Specs	DVDKingdom, speaking of devices support, I think it is possible to support all devices that are supported by kX - I have been checking something, and what you need is subsys ID: EMU10KX.DeviceDesc8="kX 10k1 Audio - Model CT4850 Value" %EMU10KX.DeviceDesc8%=KX_EMU10KX, PCI\VEN_1102&DEV_0002&SUBSYS_805101102 - connection is obvious! 00811050 There are similar numbers, just you need to understand which ones to take. Try. OK? BTW, where do you search for Device IDs? EDIT: TYPO fixed! __________________ -- Vedran Last edited by RIV@NVX; Jan 8, 2003 at 06:01 PM.

Dec 26, 2002, 04:07 PM	#133
Blurayfan HardwareHeaven Lover Join Date: Jul 2002 Location: USA Posts: 178 Rep Power: 0 System Specs	Creative Installer Patch Updated Again I was able to update the patch to include 4 more cards. SoundBlaster Audigy Series: SB0230 = 02000059 SB0231 = 0200005A SB0232 = 0200005B SB0238 = 0200005C

Dec 26, 2002, 09:39 AM	#123
Oscar DriverHeaven Junior Member Join Date: Dec 2002 Location: GVA, Canada Posts: 47 Rep Power: 0	Applications & Drivers 6) Necrosis's Audigy2 CD Pack v5.12.1.283 = Condition 1 7) SoftPaq SP22563 (v5.12.1.253) = Condition 3 8) SoftPaq SP21636 (v5.12.2.252) = Condition 3 9) SoftPaq SP20920 (v5.12.1.444 Rev. B) = Condition 3 10) Offcial SB Live! DriverPack (v5.12.1.444) = Condition 3 Condition 3 There was a half-second delay in movie playback in about every 7 seconds or so. The card would sometimes fail to send DTS signals to the receiver (it's a Creative Inspire 5700, by the way), causing interruption or complete silence. The volume for headphone was also way too low. I will post the best SB Live! drivers that I have tested so far in my next message... I find myself keep going back to these due to the incompetence of Creative Labs......

Dec 26, 2002, 09:48 AM	#124
Oscar DriverHeaven Junior Member Join Date: Dec 2002 Location: GVA, Canada Posts: 47 Rep Power: 0	Full Set of LiveWare3: 1. English (Default), Brazilian, Dutch, French, German, Italian, Spanish, Swedish; 334MB 2. English (Default), Korean, Traditional Chinese, Simplified Chinese, Japanese; 217MB LiveWare3 WinXP Update: English WDM Drivers v35.12: English (double-click on "upddrv2k.exe" to install) (I have an English-only set of LiveWare3 which is around 57MB, but I couldn't find anywhere to put it online......)

Dec 26, 2002, 02:27 PM	#129
Matth Flash Banner Hater Join Date: Jun 2002 Location: UK Posts: 3,411 Rep Power: 91 System Specs	Not sure that the classification applies to Audio drivers .... ALL the WDM versions seem to be 5.x, even for Win98. Ther may also be a GENERIC way to specify hardware - I've seen it in the INF for my Intel-based Network card The SUBSYS part is not specified, only the VEN, DEV (and sometimes REV) This may not be precise enough in this case though, as the cards are more complex and have more than one subsystem.

Dec 26, 2002, 05:04 PM	#136
dwarfy DriverHeaven Junior Member Join Date: Dec 2002 Posts: 38 Rep Power: 0	I'm downloading the audigy2 mulilangual pack (398mo on .ru ftp site). all i nedd is to use the ctcomp patch anb see if works with my sb live! and my french OS ? or is it sure it'll not work with this card, even with multilingual support ?

Dec 26, 2002, 06:09 PM	#137
Necrosis HardwareHeaven Extreme Member Join Date: May 2002 Location: Ohio Posts: 8,838 Rep Power: 129 System Specs	I can't help but look at all this effort to make these drivers work on older cards commendable. However, it is a big reason why Creative sucks too. I guess I just have personal limits as to how much BS I can tolerate to get something to work right. Good Luck

Dec 26, 2002, 06:57 PM	#138
Blurayfan HardwareHeaven Lover Join Date: Jul 2002 Location: USA Posts: 178 Rep Power: 0 System Specs	Installer Patch 5.0 Released Many new cards supported. Too Many to list. Here what still not supported CT4820 CT0070 CT0072 APS PCI256 cards Installer Patch 5.0 Thank You RIV@NVX for the updated kx.inf

Dec 26, 2002, 08:03 PM	#139
dwarfy DriverHeaven Junior Member Join Date: Dec 2002 Posts: 38 Rep Power: 0	the audigy2.zip of 398mo is broken. after 3 downloads, I can't open it (winzip, rar, ace > archive is corrupted)

Dec 26, 2002, 09:50 PM	#141
Ghungha Hyperlink king Join Date: Jul 2002 Posts: 8 Rep Power: 0	I've installed here, portuguese drivers, running fine with all updates. But i had to install each soft separately, because patch didn't work here. __________________ Asus P5K Dlx\| C2D Q6600 \| 4x1GB PC6400 \| Radeon HD2900XT \| Seagates 320 & 300GB SATA \| Viewsonic LCD 20.1" \| SB XFi pro \| Enermax 550W \| Logitech MX518 & G11 \| Vista X64 Last edited by Ghungha; Dec 26, 2002 at 10:08 PM.

Dec 26, 2002, 10:36 PM	#143
Ghungha Hyperlink king Join Date: Jul 2002 Posts: 8 Rep Power: 0	The patch works when i use the old (only english) pack. __________________ Asus P5K Dlx\| C2D Q6600 \| 4x1GB PC6400 \| Radeon HD2900XT \| Seagates 320 & 300GB SATA \| Viewsonic LCD 20.1" \| SB XFi pro \| Enermax 550W \| Logitech MX518 & G11 \| Vista X64

Dec 26, 2002, 11:55 PM	#149
dwarfy DriverHeaven Junior Member Join Date: Dec 2002 Posts: 38 Rep Power: 0	hum. Sorry, after 4 download the .zip of 687mo is NOT damaged effectivly. so, cuz my english is not so fluent (it's a bit hard for me to read the topic completly), now all I need is to apply ctcomp to this pack and try if the apps work w/ my live! ? thanks. EDIT : 2025 files on zip file, 1761 after dezip :\| the rest is CRC ... after 4 downloads ... I think i'll keep .253 softs and .323 drivers ... Last edited by dwarfy; Dec 27, 2002 at 12:22 AM.

Dec 27, 2002, 12:00 AM	#150
MeierElsewhere DriverHeaven Newbie Join Date: Nov 2002 Posts: 7 Rep Power: 0	Anyone have a multilanguage Link? As there is a link for the Audigy 2 CD posted by RIV@NVX I think I may be allowed to ask for a link to the Multilanguage Audigy 2 CD. I would really like to install it in my language. Can anyone pm me a link for it? Another question is if the multilanguage version will work with DVDKingdom´s patch... Thanks for any help! Regards ME