|
|||||||
| Audio General and Technical Discussion Having problems or wishing to share information? check this out. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Newbie
Join Date: Oct 2002
Posts: 5
Rep Power: 0 ![]() |
HELP - Audigy (modded to Audigy 2) microphone problem
Hello everyone,
I am currently using a Audigy card, modded to audigy 2 using NewYear pack. I recenly bought headphones and mic for bf2. The problem i am having is i am getting barely any sound out of the mic. I have checked all the sound settings, i increased mic volume to full everywhere (in advanced, etc, etc) When i try using the sound recorder, i only hear myself if i shout... how do i fix this? is this a driver problem? or am i messing up some settings somewhere? pls pls, do help thank you all
|
|
|
|
|
|
#2 |
|
Apple Fanboy?
|
make sure your mic is plugged into the mic jack(pink), not the line in jack(blue)
__________________
Chris - The Aussie Super Mod
Hardwareheaven Rules - Sig Request Thread How you can help HardwareHeaven by using Digg! Hardwareheaven Super-Moderator |
|
|
|
|
|
|
|
DriverHeaven Newbie
Join Date: Oct 2002
Posts: 5
Rep Power: 0 ![]() |
well it is for sure plugged into the pink one.
also i am use digital out, spdif..... would it make a difference? p.s i tried turning on and off " digital out only" it made no difference |
|
|
|
|
|
#4 |
|
HardwareHeaven Junior Member
Join Date: Jun 2002
Location: Toronto, Canada.
Posts: 97
Rep Power: 0 ![]() |
Low sound in microphone
Have you turned on the volume control from your head set ? because I have one attached to the cable with a volume control lever. Just a thought and also see if it is muted in the system volume control. Good Luck
|
|
|
|
|
|
#5 |
|
HardwareHeaven Junior Member
Join Date: Jun 2002
Location: Toronto, Canada.
Posts: 97
Rep Power: 0 ![]() |
One more thing I forgot. My head set has two out puts 1.orange 2. Pink. The orange one is for the sound and the pink for mic. Both should be plugged in
|
|
|
|
|
|
#6 |
|
DriverHeaven Lover
|
Check that the mic boost is enabled. Also make sure that in Recording properties that it is set to Microphone and not "What you hear".
|
|
|
|
![]() |
| Thread Tools | |
|
|