E6750 CPU score in 3DMark06 [56K warning!]

**temeteus82** · Dec 20, 2007, 10:57 AM

yes, still the same ... I've send support request to abit since I think it might be BIOS issue...

PangingJr · Dec 20, 2007, 11:23 AM

you should feel the heat from the system with that kind of temp, yes?

the stock Intel heatsink with fan is more than good enough if you want to use it , or use it before you can find a better replacement for it.
but with that kind of temp, there is definitely something is going wrong. i suggest you shutdown/turn off the computer, remove the board from the computer case, and then remount the CPU cooler, you must make sure that each of the 4 pronged fasteners are gripped properly.
and if the CPU temp does not get any better you may want to consider testing the CPU and the motherboard further,
so that you can decide whether or not you should send the items back for a replacement.

Asmoday · Dec 20, 2007, 11:29 AM

I really suggest you remount the cooler Teme....there is something seriously wrong with those temps. And my only explanation is bad contact..

**temeteus82** · Dec 20, 2007, 01:33 PM

Quote:

Originally Posted by PangingJr

you should feel the heat from the system with that kind of temp, yes?

the stock Intel heatsink with fan is more than good enough if you want to use it , or use it before you can find a better replacement for it.
but with that kind of temp, there is definitely something is going wrong. i suggest you shutdown/turn off the computer, remove the board from the computer case, and then remount the CPU cooler, you must make sure that each of the 4 pronged fasteners are gripped properly.
and if the CPU temp does not get any better you may want to consider testing the CPU and the motherboard further,
so that you can decide whether or not you should send the items back for a replacement.

Well, since I get conflicting info from BIOS and software I'm puzzled...

Quote:

Originally Posted by Asmoday

I really suggest you remount the cooler Teme....there is something seriously wrong with those temps. And my only explanation is bad contact..

Yeah I'm going to do that ... and since I got some Arctic Silver's Ceramique I'll aply it... I have AC MX-2 on order

But that won't explain the conflicting info

Asmoday · Dec 20, 2007, 01:44 PM

Quote:

Originally Posted by temeteus82

Well, since I get conflicting info from BIOS and software I'm puzzled...

Yeah I'm going to do that ... and since I got some Arctic Silver's Ceramique I'll aply it... I have AC MX-2 on order

But that won't explain the conflicting info

That's because the low reading is taken from the motherboard sensor, and the higher "real" values is from the internal diod on the CPU...

PangingJr · Dec 20, 2007, 02:00 PM

Quote:

Originally Posted by temeteus82

Well, since I get conflicting info from BIOS and software I'm puzzled...

well i guess you never use this Intel CPU and these new Intel chipset beased before.

**kris23** · Dec 20, 2007, 04:43 PM

you know, sometimes i wonder if that paste that comes with the heatsinks is the same stuff you can get from the junk you see on the grill after cooking meat....

why cant they package Shin-Etsu compound with the heatsinks? it shouldnt cost too much.....

**temeteus82** · Dec 20, 2007, 04:58 PM

problem solved the cooler wasn't firmly in place, it had some shavings or what ever in a way in the locking system on one of the things so I cleared that and aplied arctic ceramique and now temps are around 25C for each core idle...

Dyre Straits · Dec 20, 2007, 05:07 PM

Glad to know is was a simple thing.

**kris23** · Dec 20, 2007, 05:11 PM

Quote:

Originally Posted by temeteus82

problem solved the cooler wasn't firmly in place, it had some shavings or what ever in a way in the locking system on one of the things so I cleared that and aplied arctic ceramique and now temps are around 25C for each core idle...

now THAT'S a temperature drop now just test your chip just in case something is damaged.

PangingJr · Dec 20, 2007, 05:17 PM

Quote:

Originally Posted by kris23

you know, sometimes i wonder if that paste that comes with the heatsinks is the same stuff you can get from the junk you see on the grill after cooking meat....

why cant they package Shin-Etsu compound with the heatsinks? it shouldnt cost too much.....

lol, nah nonsense, the stock heatsink and thermal compound that comes with boxed retail C2D are not that bad. and this is not an overclock system yet.

**temeteus82** · Dec 20, 2007, 05:18 PM

well that was the idle when I booted and taken from speed fan... but everest shows them around 35C and now after some Prime and 3dMark06 they are around 40C

3dMark06 : Futuremark - ORB - Project Comparison

**kris23** · Dec 20, 2007, 05:31 PM

Quote:

Originally Posted by temeteus82

well that was the idle when I booted and taken from speed fan... but everest shows them around 35C and now after some Prime and 3dMark06 they are around 40C

3dMark06 : Futuremark - ORB - Project Comparison

no drop in multiplier?

**kris23** · Dec 20, 2007, 05:34 PM

Quote:

Originally Posted by PangingJr

lol, nah nonsense, the stock heatsink and thermal compound that comes with boxed retail C2D are not that bad. and this is not an overclock system yet.

yea.... i know that the stock heatsink is a decent item, simple to produce and good. but i wish there is the extra couple bucks/cents to get a compound that'll make the chip last longer....

**temeteus82** · Dec 20, 2007, 05:43 PM

Quote:

Originally Posted by kris23

no drop in multiplier?

nope, since I get over 2000 point's in CPU bench

**kris23** · Dec 20, 2007, 06:14 PM

good, your system is running just as its supposed to

PangingJr · Dec 20, 2007, 06:40 PM

start overclock the FSB and CPU to about 20%

here's with all Vcore, PCIe and FSB are at stock volts, just up MCH from 1.25V to 1.35V (because 4 sticks of RAMs and a shorter timings are in use). and the E6750 is with the stock Intel heatsink/fan but using MX-2 thermal paste.

**temeteus82** · Dec 20, 2007, 06:51 PM

I'll wait to get some good cooler before OC'ing it

Dec 20, 2007, 11:29 AM	#33
Asmoday Demonic Join Date: May 2002 Location: In the cold, dark north... Posts: 5,198 Rep Power: 92 System Specs	I really suggest you remount the cooler Teme....there is something seriously wrong with those temps. And my only explanation is bad contact.. __________________ How You can help Hardwareheaven by using Digg

Dec 20, 2007, 04:43 PM	#37
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	you know, sometimes i wonder if that paste that comes with the heatsinks is the same stuff you can get from the junk you see on the grill after cooking meat.... why cant they package Shin-Etsu compound with the heatsinks? it shouldnt cost too much..... __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

Dec 20, 2007, 06:14 PM	#46
kris23 Going Insane..... Join Date: Dec 2006 Location: Los Angeles Posts: 6,017 Rep Power: 131 System Specs	good, your system is running just as its supposed to __________________ Hardwareheaven Super-Moderator Building a new computer system and not sure where to start? Click Here! last updated (5/18/11) Rosewill FUTURE case replaces CM 690 II with its greater interior length. Building a PC: Step by Step Guide Written by Kristopher Pedemonte and Nathan Marks-Forder Edited by Allan Campbell Questions or Comments? feel free to post them in the forums!

Dec 20, 2007, 11:23 AM	#32
PangingJr Member Join Date: Mar 2003 Posts: 5,989 Rep Power: 71	you should feel the heat from the system with that kind of temp, yes? the stock Intel heatsink with fan is more than good enough if you want to use it , or use it before you can find a better replacement for it. but with that kind of temp, there is definitely something is going wrong. i suggest you shutdown/turn off the computer, remove the board from the computer case, and then remount the CPU cooler, you must make sure that each of the 4 pronged fasteners are gripped properly. and if the CPU temp does not get any better you may want to consider testing the CPU and the motherboard further, so that you can decide whether or not you should send the items back for a replacement.

Dec 20, 2007, 06:40 PM	#47
PangingJr Member Join Date: Mar 2003 Posts: 5,989 Rep Power: 71	start overclock the FSB and CPU to about 20% here's with all Vcore, PCIe and FSB are at stock volts, just up MCH from 1.25V to 1.35V (because 4 sticks of RAMs and a shorter timings are in use). and the E6750 is with the stock Intel heatsink/fan but using MX-2 thermal paste.