Post Your ATi Tool Tray Benchmark

>GSXR<mrbusa · Dec 2, 2006, 05:06 PM

Quote:

Originally Posted by Dyre Straits

With just the default cooler and no overclocking, this is the best score so far on this X1950 Pro from PowerColor: (Ignore the specs in the profile for now. I'm using a borrowed nForce4-A754 with 1.5 GB of PC3200 and a AMD 3100+)

I'm sure it's the AMD 3100+ that's really holding things back for now. Also, the PC3200 is set to default so there's no real stress on anything.

Thats really all you got with a 1950pro. There is some serious bottlenecking going on somewhere. I'm wondering now if my system will be able to keep up with the AGP version of the card. I'm probably going to get it anyhow and hope for the best because atleast I will be able to take atvantage of the newer capabilities.

Dyre Straits · Dec 2, 2006, 09:08 PM

Quote:

Originally Posted by >GSXR<mrbusa

Thats really all you got with a 1950pro. There is some serious bottlenecking going on somewhere. I'm wondering now if my system will be able to keep up with the AGP version of the card. I'm probably going to get it anyhow and hope for the best because atleast I will be able to take atvantage of the newer capabilities.

That's not only all I got. If I repeat the bench it's a lot worse unless I reboot the system.

I'm sure some overclocking can make a huge difference on this system. BUT, I was quite disappointed with this 'highest' score so far, yes!

Dyre Straits · Dec 4, 2006, 11:19 AM

UPDATED: After installing the latest Beta version of ATT -- AND doing some CPU and GPU overclocking, this is the result:

Again, though, this system is greatly CPU limited. It's a AMD Sempron 3100+ and I'm pushing it to 215 FSB. You'll see the GPU Core and Memory are also OC'd.

Tipstaff · Dec 4, 2006, 11:37 AM

That's with the new X1950 Pro, right? Lemme guess: a GPU clock rate of between 600mhz and 620mhz? With the HIS card clocked at the "real" default of 635mhz I get around 6300 or so (and at the clock rate that HIS says it's supposed to be of 620mhz I get around 6150-6200).

Of note, those scores I just mentioned, I got the exact same scores on both an Asus P5W DH motherboard, and the current Intel D975XBX board. 2 different boards, 2 different installs, same scores. Also, if anyone can figure out how to get the benchmark working in Crossfire I'll be happy to post those scores.

BTW, for anyone posting benchmark scores be sure to use the latest version of ATI Tray Tools, and not one that might have come packed in with a driver set you are using, or an older one. Otherwise the score comparison will be all screwed up. For instance: compare the scores the X800XTPE got of 7194 points off of the first post, and compare that score to the updated one of 4759 from the lastest version of ATT which Dyre just posted about. As you can see the scores are totally different now.

Dyre Straits · Dec 4, 2006, 08:58 PM

Yes, GPU clocks are 614:720. CPU is at 215 FSB.

One thing about this mobo (ECS nForce4-A754) is that there's no setting to lock the PCI bus at 33. Since there's no AGP to deal with, I don't have to worry about locking AGP to 66. However, there's so very little room to install any PCI card that locking the PCI bus is also just about a non-issue, too.

Dyre Straits · Jan 1, 2007, 10:20 AM

Updated Score after recent PC Upgrades:

>GSXR<mrbusa · Jan 7, 2007, 10:46 PM

Updated with my winter overclock score.
X850XTPE AGP 579/614

>GSXR<mrbusa · Jan 23, 2007, 01:07 AM

cozumel · Jan 23, 2007, 02:50 AM

6898.81

>GSXR<mrbusa · Jan 23, 2007, 03:19 AM

Quote:

Originally Posted by cozumel

6898.81

What version of ATT?
What version of drivers?
What are your basic graphics settings at?
Do you have access to geometry instancing or is it greyed out? Mine is greyed out for some reason.

cozumel · Jan 23, 2007, 03:32 AM

Quote:

Originally Posted by >GSXR<mrbusa

What version of ATT?
What version of drivers?
What are your basic graphics settings at?
Do you have access to geometry instancing or is it greyed out? Mine is greyed out for some reason.

1.2.6.964
Latest Omega drivers.
At the factory overclock 621/742.
As for geometry instancing and I've only started using Omega/ATT last week and can't find the option. But I'm gonna try look for it now. Where is it pls?
BTW, Im buggered if I can get the memory to overclock. I can get it down a bit but if i try and reduce to stock (700) speeds it crashes!!!! What gives....

Edit: I could overclock memory with ATT .977 but 978 wouldn't work and I haven't tried anything else yet.

>GSXR<mrbusa · Jan 23, 2007, 04:02 AM

Quote:

Originally Posted by cozumel

1.2.6.964
Latest Omega drivers.
At the factory overclock 621/742.
As for geometry instancing and I've only started using Omega/ATT last week and can't find the option. But I'm gonna try look for it now. Where is it pls?
BTW, Im buggered if I can get the memory to overclock. I can get it down a bit but if i try and reduce to stock (700) speeds it crashes!!!! What gives....

Edit: I could overclock memory with ATT .977 but 978 wouldn't work and I haven't tried anything else yet.

Because the HIS versions have a temp sensor and fan control we can turn off low level driver overclocking and use driver level. The card will overclock like normal that way. We can also disable the hotkey poller service manually, like I like to do, instead of having ATT do it at boot. I am falling in love with this card.

The reason I asked about what version ATT you are using is because sometimes depending on the version the bench score can differ allot.
The latest beta version can be found on guru3d in case you didn't know.

Geometry instancing is under direct 3d/ additional, at the top of the menu.

cozumel · Jan 23, 2007, 04:22 AM

Nope, that option does't exist in under that tab. I'd already looked. Only option are for alternate pixels, DXT and bump mapping. That option is not available under the Direct3D tab of ATI control panel either.

As far as the bench score go - I don't really know how realiable they all are. My 3DMark 06 is about the same as you, 3Dmk05 is down and ATT is up. Whats it all mean eh? As long as the gaming is good what's it matter.

Good to see your rep is back in the green again!

>GSXR<mrbusa · Jan 23, 2007, 04:57 AM

Quote:

Originally Posted by cozumel

Good to see your rep is back in the green again!

I will have to see what I can do about that.

The reason I was curious about your scores is I wanted to know about how much faster the 512mb card is compared to the 256mb card. The only real way is to run the same recorded time demo on the same exact system, drivers, and with the same IQ.

Congrats on the card and good luck with the OC. When you run some OCed benches post some scores back up.
Did you get your vram overclocking correctly with how I told you?

cozumel · Jan 23, 2007, 05:21 AM

I'll do try to see whether I can adjust ram speed on reboot with those settings. FYI, I've got my fan at 41% till she gets to 40c and then 77% at 50c. Soon as she hits 50c she drops back down to 46,47,48 etc. Thats when she on load test, benching or gamin'.

Arghuleh · Mar 8, 2007, 09:48 PM

I got 4316.1 points in benchmark with ATT.

Graphics: Powercolor X800XL 256MB PCIe overclocked from 400/490 to 421.20/531.90.
CPU: AMD Athlon 64 3500+ Winchester
Board: Asus A8R-MVP
Memory: Kingmax Superram 4x512 MB

I don't know if is good or not...

Played Armed Assault for 5 minutes with no problems. Though this is my first time overclocking.

LeighPing · Feb 15, 2008, 05:28 PM

Can anybody tell me why or how I score so high? I tested & tested & it still come up high.
P4 3.2 @ 3.6Ghz, X1950 Pro agp with Zalman air cooler attached. Any advice welcome. Thanks.

kill7ech · Feb 23, 2008, 10:35 PM

Quote:

Originally Posted by Neshi

i dont get this benchmarking...

this is at stock.
378/338

this one is when i cheched what the max would be without artifacts.
395/378

but what i dont get is, my score is so much lower then what the other score is with my videocard. the 9800 pro.
how come? and can i get a higher score when my cooling on the card is better? so can i overclock more without artifacts?

and i just noticed.. when overclocking my card, my score is lower then on stock.. or do i do something wrong here?

this could be because your mobo or processor is getting hot after use and causing it to overheat but other then that you should be satisfied :P i get around 880 max with my radeon 9600 SE with clocks @ 360/216

but also my specs are just bad period so meh

kill7ech · Mar 5, 2008, 10:23 PM

with 8.3

Count Spankula · Aug 8, 2009, 08:26 AM

I have also a 25,000+ score! WTH? How come theres so many low scores?
Check out My score.

Count Spankula · Aug 8, 2009, 08:32 AM

Yes I also have a score of over 23,000! My CPU is only a Intel E2180 2.0GHZ oc to 3.1 GHZ
Gigabyte ep43-ds3l mobo, 8bg of Crucial and Corsair sticks, 800mhzddr2, oc to 1066, HD 4850 vid card, Western caviar 150GB 7,200 rpm,500watt PSU, OCZ Vanquisher CPU heatsink, 3 fan case, Vista ultimate 32 bit.! a budget build really!

Count Spankula · Aug 8, 2009, 08:40 AM

I have also a 23,000+ score! WTH? How come theres so many low scores?
Check out My score.

locker28 · Aug 8, 2009, 08:49 AM

hello! Everybody
i am the first member of driverheaven.com
i am inosent in IT.So help me!

Lowfat · Aug 9, 2009, 08:14 AM

Quote:

Originally Posted by Count Spankula

I have also a 25,000+ score! WTH? How come theres so many low scores?
Check out My score.

Because this thread is OOOLD and most of the scores are from Circa 2006.

Dec 4, 2006, 11:37 AM	#64
Tipstaff HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Real capital of Canada: Torauna Posts: 6,658 Rep Power: 187 System Specs	That's with the new X1950 Pro, right? Lemme guess: a GPU clock rate of between 600mhz and 620mhz? With the HIS card clocked at the "real" default of 635mhz I get around 6300 or so (and at the clock rate that HIS says it's supposed to be of 620mhz I get around 6150-6200). Of note, those scores I just mentioned, I got the exact same scores on both an Asus P5W DH motherboard, and the current Intel D975XBX board. 2 different boards, 2 different installs, same scores. Also, if anyone can figure out how to get the benchmark working in Crossfire I'll be happy to post those scores. BTW, for anyone posting benchmark scores be sure to use the latest version of ATI Tray Tools, and not one that might have come packed in with a driver set you are using, or an older one. Otherwise the score comparison will be all screwed up. For instance: compare the scores the X800XTPE got of 7194 points off of the first post, and compare that score to the updated one of 4759 from the lastest version of ATT which Dyre just posted about. As you can see the scores are totally different now. __________________ Portal: The Flash Version _________________________________ Brain: So, you sacked the cocky khaki Kicky Sack sock plucker? Mr. Sackett: The second cocky khaki Kicky Sack sock plucker I've sacked since the sixth sitting sheet slitter got sick.

Jan 23, 2007, 01:07 AM	#68
>GSXR<mrbusa im a FREAK Join Date: Feb 2004 Location: Portland, OR Posts: 2,107 Rep Power: 55 System Specs	HIS X1950PRO 256 AGP Stock speeds 620/1480

Jan 23, 2007, 02:50 AM	#69
cozumel I'm dangerous but cute... Join Date: Apr 2006 Location: Under the waves... Posts: 3,577 Rep Power: 58 System Specs	6898.81 __________________ Don't worry about money - Be a beach bum! Scuba Rocks

Jan 23, 2007, 04:22 AM	#73
cozumel I'm dangerous but cute... Join Date: Apr 2006 Location: Under the waves... Posts: 3,577 Rep Power: 58 System Specs	Nope, that option does't exist in under that tab. I'd already looked. Only option are for alternate pixels, DXT and bump mapping. That option is not available under the Direct3D tab of ATI control panel either. As far as the bench score go - I don't really know how realiable they all are. My 3DMark 06 is about the same as you, 3Dmk05 is down and ATT is up. Whats it all mean eh? As long as the gaming is good what's it matter. Good to see your rep is back in the green again! __________________ Don't worry about money - Be a beach bum! Scuba Rocks

Jan 23, 2007, 05:21 AM	#75
cozumel I'm dangerous but cute... Join Date: Apr 2006 Location: Under the waves... Posts: 3,577 Rep Power: 58 System Specs	I'll do try to see whether I can adjust ram speed on reboot with those settings. FYI, I've got my fan at 41% till she gets to 40c and then 77% at 50c. Soon as she hits 50c she drops back down to 46,47,48 etc. Thats when she on load test, benching or gamin'. __________________ Don't worry about money - Be a beach bum! Scuba Rocks

Jan 7, 2007, 10:46 PM	#67
>GSXR<mrbusa im a FREAK Join Date: Feb 2004 Location: Portland, OR Posts: 2,107 Rep Power: 55 System Specs	Updated with my winter overclock score. X850XTPE AGP 579/614

Mar 8, 2007, 09:48 PM	#76
Arghuleh DriverHeaven Newbie Join Date: Mar 2005 Location: Sweden, 30 km north of Stockholm Posts: 3 Rep Power: 0	I got 4316.1 points in benchmark with ATT. Graphics: Powercolor X800XL 256MB PCIe overclocked from 400/490 to 421.20/531.90. CPU: AMD Athlon 64 3500+ Winchester Board: Asus A8R-MVP Memory: Kingmax Superram 4x512 MB I don't know if is good or not... Played Armed Assault for 5 minutes with no problems. Though this is my first time overclocking.

Feb 15, 2008, 05:28 PM	#77
LeighPing DriverHeaven Newbie Join Date: Feb 2008 Posts: 1 Rep Power: 0	Can anybody tell me why or how I score so high? I tested & tested & it still come up high. P4 3.2 @ 3.6Ghz, X1950 Pro agp with Zalman air cooler attached. Any advice welcome. Thanks.

Mar 5, 2008, 10:23 PM	#79
kill7ech DriverHeaven Junior Member Join Date: Jan 2008 Posts: 29 Rep Power: 0	with 8.3 __________________ Processor: Athlon XP 1600+ @ 1.54 ghz Memory: 512 MB RAM DDR2 Hard Drive: 40 GB Digital Western Video Card: Radeon 9600 SE AGP 128MB Monitor: TTX @ 90 hz Sound Card: SB Live! Wave Device Operating System: Windows XP Professional SP2

Aug 8, 2009, 08:32 AM	#81
Count Spankula DriverHeaven Newbie Join Date: Aug 2009 Location: I sure do! Posts: 3 Rep Power: 0 System Specs	Re: Post Your ATi Tool Tray Benchmark Yes I also have a score of over 23,000! My CPU is only a Intel E2180 2.0GHZ oc to 3.1 GHZ Gigabyte ep43-ds3l mobo, 8bg of Crucial and Corsair sticks, 800mhzddr2, oc to 1066, HD 4850 vid card, Western caviar 150GB 7,200 rpm,500watt PSU, OCZ Vanquisher CPU heatsink, 3 fan case, Vista ultimate 32 bit.! a budget build really!

Aug 8, 2009, 08:40 AM	#82
Count Spankula DriverHeaven Newbie Join Date: Aug 2009 Location: I sure do! Posts: 3 Rep Power: 0 System Specs	Re: Post Your ATi Tool Tray Benchmark I have also a 23,000+ score! WTH? How come theres so many low scores? Check out My score.

Aug 8, 2009, 08:49 AM	#83
locker28 DriverHeaven Newbie Join Date: Aug 2009 Location: yangon Posts: 1 Rep Power: 0	Re: Post Your ATi Tool Tray Benchmark hello! Everybody i am the first member of driverheaven.com i am inosent in IT.So help me!