No Sound

q3athos · Mar 3, 2006, 03:02 AM

Hey guys. This is my computers specs: ModelPCV-RX991Processor3.06 GHz1 Intel® Pentium® 4 with Hyper-Threading Technology Hard Disk Drive250 GB2, ATA-100
C = 15 GB / D = 235 GB Standard Memory (RAM)1 GB PC2700 DDR-SDRAM maximum GraphicsNVIDIA® GeForce4 MX 440 Video Memory (VRAM)64 MB (128-bit) Sound CapabilitiesYamaha YMF-753 Floppy Disk Drive3.5" 1.44 MB DVD-RW Drive4.8X max. DVD-RW/DVD-R reading3
12X max. DVD-ROM reading
32X max. CD-R/CD-ROM reading
20X max. CD-RW reading
8X max. CD-R writing
4X max. CD-RW writing
2X max. DVD-R writing
1X max. DVD-RW writing DVD-ROM Drive4.8X max DVD-RW/DVD-R reading4
16X max. DVD-ROM reading
20X max. CD-RW reading
40X max. CD-R/CD-ROM reading ModemV.90 data/fax modem5 (REN 0.8B) Expansion CapabilitiesHard disk drive bay
PCI slots (2) Connection Capabilities – FrontMemory Stick® media slot
i.LINK (4-pin) port
USB 2.0 ports (2) Connection Capabilities - RearUSB 2.0 ports (4)
PS/2® keyboard port
PS/2 mouse port
VGA and DVI monitor ports
Parallel (printer) port
S/P DIF Optical out port
Headphones jack
Line In jack
Microphone jack
i.LINK (6-pin) port
Modem line jack
Telephone jack
DC Out jack
10BASE-T/100BASE-TX Ethernet-LAN port (RJ-45) Supplied AccessoriesVAIO® Smart keyboard
PS/2 Wheel mouse
Stereo speakers with power cable (PCVA-SP3A)
Power cord
Modem cable ServiceOne year limited express repair service upon registration. 90 days without registration. See Limited Warranty Card.6 Limited WarrantyOne year parts/labor upon registration. 90 days from date of purchase without registration. See Limited Warranty Card.6 Telephone SupportOne year hardware support upon registration. 90 days software support upon registration. See Limited Warranty Card.6 Power Requirement268 watts maximum Voltage100-120 V ~3.9A Dimensions8.0" (w) x 14.2" (h) x 14.6" (d)
(203 mm x 360 mm x 371 mm) Weight28.7 lbs. (13 kg) Operating Temperature50°F to 95°F (+10°C to 35°C)

My problem is that I recently installed an omega driver (I think it was version 1.6693) in order to play quake 4. After installing it, quake booted up and worked with one problem, no sound. I quit quake and went looking for the problem. My computer's sound devices are working properly but the computer doesn't see the devices hooked up. When I go into the sound properties it shows that there is not an audio device connected. Any ideas or suggestions?

thomasabarnes · Mar 3, 2006, 04:56 AM

Man, you didn't even mention what's your audio source, unless I overlooked it.

Did you install onboard sound or are you using a kX compatible soundcard. Maybe you havent installed drivers for onboard sound. If youre using a soundcard mention what card and what drivers you are using.

EDIT:

Oh you have onboard audio: Yamaha YMF-753.

Did you install the drivers for your onboard sound, and make sure that sound device is selected in Windows Control Panel "Sounds and Audio Devices Properties??"

Also, this is a bug report thread for the kX Project Audio Drivers. I don't see where you mentioned that your'e using a kX Compatible sound card, so what made you post in this thread?

q3athos · Mar 4, 2006, 07:32 PM

I apologize. After registering I used the forum jump and found a section labeled bug reports. I dont have a kx audio driver so I am in the wrong spot. Sorry.

Mar 3, 2006, 03:02 AM	#1
q3athos DriverHeaven Newbie Join Date: Mar 2006 Posts: 2 Rep Power: 0	No Sound Hey guys. This is my computers specs: ModelPCV-RX991Processor3.06 GHz1 Intel® Pentium® 4 with Hyper-Threading Technology Hard Disk Drive250 GB2, ATA-100 C = 15 GB / D = 235 GB Standard Memory (RAM)1 GB PC2700 DDR-SDRAM maximum GraphicsNVIDIA® GeForce4 MX 440 Video Memory (VRAM)64 MB (128-bit) Sound CapabilitiesYamaha YMF-753 Floppy Disk Drive3.5" 1.44 MB DVD-RW Drive4.8X max. DVD-RW/DVD-R reading3 12X max. DVD-ROM reading 32X max. CD-R/CD-ROM reading 20X max. CD-RW reading 8X max. CD-R writing 4X max. CD-RW writing 2X max. DVD-R writing 1X max. DVD-RW writing DVD-ROM Drive4.8X max DVD-RW/DVD-R reading4 16X max. DVD-ROM reading 20X max. CD-RW reading 40X max. CD-R/CD-ROM reading ModemV.90 data/fax modem5 (REN 0.8B) Expansion CapabilitiesHard disk drive bay PCI slots (2) Connection Capabilities – FrontMemory Stick® media slot i.LINK (4-pin) port USB 2.0 ports (2) Connection Capabilities - RearUSB 2.0 ports (4) PS/2® keyboard port PS/2 mouse port VGA and DVI monitor ports Parallel (printer) port S/P DIF Optical out port Headphones jack Line In jack Microphone jack i.LINK (6-pin) port Modem line jack Telephone jack DC Out jack 10BASE-T/100BASE-TX Ethernet-LAN port (RJ-45) Supplied AccessoriesVAIO® Smart keyboard PS/2 Wheel mouse Stereo speakers with power cable (PCVA-SP3A) Power cord Modem cable ServiceOne year limited express repair service upon registration. 90 days without registration. See Limited Warranty Card.6 Limited WarrantyOne year parts/labor upon registration. 90 days from date of purchase without registration. See Limited Warranty Card.6 Telephone SupportOne year hardware support upon registration. 90 days software support upon registration. See Limited Warranty Card.6 Power Requirement268 watts maximum Voltage100-120 V ~3.9A Dimensions8.0" (w) x 14.2" (h) x 14.6" (d) (203 mm x 360 mm x 371 mm) Weight28.7 lbs. (13 kg) Operating Temperature50°F to 95°F (+10°C to 35°C) My problem is that I recently installed an omega driver (I think it was version 1.6693) in order to play quake 4. After installing it, quake booted up and worked with one problem, no sound. I quit quake and went looking for the problem. My computer's sound devices are working properly but the computer doesn't see the devices hooked up. When I go into the sound properties it shows that there is not an audio device connected. Any ideas or suggestions?

Mar 3, 2006, 04:56 AM	#2
thomasabarnes Long Time ***** Friend Join Date: Jan 2003 Location: USA Posts: 1,373 Rep Power: 58 System Specs	Man, you didn't even mention what's your audio source, unless I overlooked it. Did you install onboard sound or are you using a kX compatible soundcard. Maybe you havent installed drivers for onboard sound. If youre using a soundcard mention what card and what drivers you are using. EDIT: Oh you have onboard audio: Yamaha YMF-753. Did you install the drivers for your onboard sound, and make sure that sound device is selected in Windows Control Panel "Sounds and Audio Devices Properties??" Also, this is a bug report thread for the kX Project Audio Drivers. I don't see where you mentioned that your'e using a kX Compatible sound card, so what made you post in this thread? __________________ May a song always touch you in a positive way. Sonar 8.5.3 PE, Windows 7 Pro 64Bit, MOTU UltraLite MK3, 150 GB HDD, 250 GB HDD, 1 TB HDD 7200 rpm, My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs Last edited by thomasabarnes; Mar 3, 2006 at 05:03 AM.

Mar 4, 2006, 07:32 PM	Thread Starter #3
q3athos DriverHeaven Newbie Join Date: Mar 2006 Posts: 2 Rep Power: 0	I apologize. After registering I used the forum jump and found a section labeled bug reports. I dont have a kx audio driver so I am in the wrong spot. Sorry.