adobe audition and ct4832 or ct 4830

jurasaco · May 31, 2006, 03:50 AM

when i open adobe audition and configure for record from asio the first time
i can record with out problems.
but in the same session i push record button again and send message "the ausio input is not activated...blabalblablab" .
the same happen in fruity loops studio (but with out messages).
and the same happen in diffrent computers.
is adobe audition bug ?
or
is a kx driver bug???
thx

Max M. · May 31, 2006, 02:55 PM

> "the ausio input is not activated...blabalblablab"

"asio" or "audio"? if you use ASIO interface in the audition - make sure you set correct sample rate (kX does not allow recording at 44.1kHz - use 48kHz)

jurasaco · May 31, 2006, 07:25 PM

Quote:

Originally Posted by Max M.

> "the ausio input is not activated...blabalblablab"

"asio" or "audio"? if you use ASIO interface in the audition - make sure you set correct sample rate (kX does not allow recording at 44.1kHz - use 48kHz)

Audition is configured at 48k 16 bits, in the Kx Asio control panel 48kHz option is selected .
The warning message from audition is "the audio input is not activated......".
I follow the steps described in the kx help files for ASIO RECORDING...but dont work.
i 'm using the asio 0-1 as input in audition.
In kx dsp prolog AC97 Output is wired to epilog 0-1.
I hear the signal selected as source in AC97 in my headphones all time.
but record to audition some times only.
thx.

Maddogg6 · May 31, 2006, 09:09 PM

try a different ASIO pair (like 4/5) - I thought I seen some Live cards have issues with some ASIO register changing ??

Maybe Im wrong - but worth a try.

jurasaco · Jun 1, 2006, 04:35 PM

Quote:

Originally Posted by Maddogg6

try a different ASIO pair (like 4/5) - I thought I seen some Live cards have issues with some ASIO register changing ??

Maybe Im wrong - but worth a try.

exactly!!!!
i am recording now, from asio 3, and de Kx DSP is wired in asio 0 and asio 1.
with ASIO4ALL Audition works fine but use a lot of CPU.
Is this a kx driver bug????
is my system bug???
is ADOBE AUDITION BUG?????
-----------------------------------------------
AMD 3000+ 64bits 1Giga RAM
Windows XP
Kx Drivers 3537 - SB Live value CT4832
Adobe Audition 2.0

Thx

Doug W · Jun 1, 2006, 05:51 PM

I have some funny ASIO routing problems which show up on this system

CT4830
Win 98SE
PIII 500Mhz CPU
kX 3534f
Kristal

I don't really know if the problem is kX, the card or recording software. My kX ASIO inputs 0/1 do record correctly when 0/1 is selected from the recording program, (Kristal), but I remember I had some problem when recording ASIO 2/3 or 4/5 ?? and had to select a different corresponding input in Kristal.

Also when I create a custom DSP MIDI sounds come from FX Bus 8/9 instead of 2/3 even though 2/3 is selected in the router.

But I'm generally happy with the setup so I won't mess with it.

Max M. · Jun 1, 2006, 05:51 PM

[color=gray]
>i am recording now, from asio 3, and de Kx DSP is wired in asio 0 and asio 1.
that's very - very strange - CT4832 never had any problems with that asio channel mapping - it's just old good Live! '4.0' (i had one) and... hmmm... well, i have no explanations for such stuff - for me it looks like a new kX bug [/color]
Anyone have same porblems with ct483x?
btw, jurasaco could you please check if you have the right port selected as audition input? (anyway that "simetimes works simetimes not" looks strange)

Maddogg6 · Jun 1, 2006, 06:03 PM

Quote:

Originally Posted by jurasaco

exactly!!!!
i am recording now, from asio 3, and de Kx DSP is wired in asio 0 and asio 1.
with ASIO4ALL Audition works fine but use a lot of CPU.
Is this a kx driver bug????
is my system bug???
is ADOBE AUDITION BUG?????
-----------------------------------------------
AMD 3000+ 64bits 1Giga RAM
Windows XP
Kx Drivers 3537 - SB Live value CT4832
Adobe Audition 2.0

Thx

Cool.
But I dont use audtion, so I cant say. But it wouldnt suprise me if it were a CPU hog? - but your system seems pretty fast, so Im thinking - search around for system optimizations. Becase for me, KX and Sonar - I can easily get 12 tracks playing and record 1 (all stereo btw) and use <10% of CPU. And latency set to 8ms. It isnt until I add VST(i)/DX(i) that my cpu load increases significantly.

Audition, IIRC, is what used to be CoolEdit - I never cared for it long enough to know anything about it.

There are those here using KX V3534 - as its reported its ASIO performance is the best, is stable etc... Maybe give that a try?? - but first read the change log to make sure your card model is supported, other features you may use now *could* be lost as well.

Wait a minute - does it only work with ASIO4ALL - the added software layer could slow things down - does the KX ASIO not work for you??
I never used ASIO4ALL - as KX ASIO has worked for me. SO I know little about its use/demands on a system.

jurasaco · Jun 1, 2006, 06:46 PM

Quote:

Originally Posted by Maddogg6

Cool.
But I dont use audtion, so I cant say. But it wouldnt suprise me if it were a CPU hog? - but your system seems pretty fast, so Im thinking - search around for system optimizations. Becase for me, KX and Sonar - I can easily get 12 tracks playing and record 1 (all stereo btw) and use <10% of CPU. And latency set to 8ms. It isnt until I add VST(i)/DX(i) that my cpu load increases significantly.

Audition, IIRC, is what used to be CoolEdit - I never cared for it long enough to know anything about it.

There are those here using KX V3534 - as its reported its ASIO performance is the best, is stable etc... Maybe give that a try?? - but first read the change log to make sure your card model is supported, other features you may use now *could* be lost as well.

Wait a minute - does it only work with ASIO4ALL - the added software layer could slow things down - does the KX ASIO not work for you??
I never used ASIO4ALL - as KX ASIO has worked for me. SO I know little about its use/demands on a system.

Excuse my english, is very bad.

Kx driver ASIO work great for me: low CPU utilization, good quality for recording, low latencie.

ASIO4ALL - with 6 tracks playing and 1 track recording from line-in, High CPU utilization, regular latency.

i found this info, say something about the asio issue
http://members.home.nl/nahutec/kxtut...kxcubasesx.htm

THANX for the help
now begin the recording sessions
bye

jurasaco · Jun 1, 2006, 07:04 PM

Quote:

Originally Posted by Max M.

[color=gray]
>i am recording now, from asio 3, and de Kx DSP is wired in asio 0 and asio 1.
that's very - very strange - CT4832 never had any problems with that asio channel mapping - it's just old good Live! '4.0' (i had one) and... hmmm... well, i have no explanations for such stuff - for me it looks like a new kX bug [/color]
Anyone have same porblems with ct483x?
btw, jurasaco could you please check if you have the right port selected as audition input? (anyway that "simetimes works simetimes not" looks strange)

yes is the same and not work
in kx DSP asio 0 y asio 1 is wired to the source.
but when y select asio 3 (as mono input in audition), work fine, i see the waveform recorded..
second time..
i push record button again in the same session, in the same track, and not work, no sound recorded.
well, i try again and define asio 2 (as mono input in audition) and i can record again, extrange.
finally use stereo input in audition using the asio 2 y asio 3. this solve the issue for me.
regards

May 31, 2006, 03:50 AM	#1
jurasaco DriverHeaven Newbie Join Date: May 2006 Posts: 5 Rep Power: 0	adobe audition and ct4832 or ct 4830 when i open adobe audition and configure for record from asio the first time i can record with out problems. but in the same session i push record button again and send message "the ausio input is not activated...blabalblablab" . the same happen in fruity loops studio (but with out messages). and the same happen in diffrent computers. is adobe audition bug ? or is a kx driver bug??? thx

May 31, 2006, 02:55 PM	#2
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,639 Rep Power: 69	> "the ausio input is not activated...blabalblablab" "asio" or "audio"? if you use ASIO interface in the audition - make sure you set correct sample rate (kX does not allow recording at 44.1kHz - use 48kHz)

May 31, 2006, 09:09 PM	#4
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	try a different ASIO pair (like 4/5) - I thought I seen some Live cards have issues with some ASIO register changing ?? Maybe Im wrong - but worth a try.

Jun 1, 2006, 05:51 PM	#6
Doug W HardwareHeaven Senior Member Join Date: Mar 2003 Location: Montevideo, MN USA Posts: 973 Rep Power: 0	I have some funny ASIO routing problems which show up on this system CT4830 Win 98SE PIII 500Mhz CPU kX 3534f Kristal I don't really know if the problem is kX, the card or recording software. My kX ASIO inputs 0/1 do record correctly when 0/1 is selected from the recording program, (Kristal), but I remember I had some problem when recording ASIO 2/3 or 4/5 ?? and had to select a different corresponding input in Kristal. Also when I create a custom DSP MIDI sounds come from FX Bus 8/9 instead of 2/3 even though 2/3 is selected in the router. But I'm generally happy with the setup so I won't mess with it.