asio crackles and crashes

BuzzT · Jul 13, 2007, 10:40 PM

Hello,

kx 3538m is really great! But I got the following problems with its asio driver:
While working on my music projects i'll often get crackling sounds after some minutes followed by a "little" asio crash.
That means I have to change the sync mode and everything is fine again - just for a few minutes. It is not a latency related problem, because it happens with every latency that I choose. The cpu load increases a lot for less than a half second. None of my VST-plugins causes that much cpu load. Usually I can work even on big projects at around 8 ms latency with no problems.

Some facts about my actual system: AM2 mainboard, amd athlon 64 x2 5200+, 2GB Ram DDR2, Audigy 2ZS, KX 3538m, WinXP Pro SP2
On my old system the same things happend. This was a Athlon XP 1800+ with 1GB Ram DDR and 3538m too.

Can anyone help me to find out the reason of this problem? Is it kx or WinXP related?

freechess · Jul 16, 2007, 01:06 AM

I'm afraid that won't help you,
but I have a similar crackling problem:

When I load a session in Adobe Audition 2.0
(i.e. 3 tracks - recorded in ASIO - 48kHz - 32bit - Duration: 5mins)
and play it, I have to face..

1.) a crackling/popping sound until
2.) it's kind of "freezing" more and more - means the tempo divides into half, quarter, eighth etc.
until it gets stuck almost completely, which sounds terrible - as you can imagine..
After pushing the "Pause"-Button twice - playback continues to normal tempo (!) until the next sko weird stuttering..

So I have to play through the 5mins, always preparing to push the "Pause"-Button twice, which is no fun at all.
However - after going through that - I start the Playback from the beginning, and the whole session works just fine.

Why this indispensable first "test run"?

THX for thoughts..

BuzzT · Jul 26, 2007, 11:02 AM

I found out that the problem depends on the asio sync mode. Before I only used the 10k2 modes. Now I use "Map/Timer/Event" and there are no errors at all. Even @ 4ms (!).

Could anyone please explain the difference between the 10k1 and 10k2 sync modes? Thanks.

Jul 13, 2007, 10:40 PM	#1
BuzzT HardwareHeaven Junior Member Join Date: Aug 2006 Location: Germany Posts: 27 Rep Power: 0	asio crackles and crashes Hello, kx 3538m is really great! But I got the following problems with its asio driver: While working on my music projects i'll often get crackling sounds after some minutes followed by a "little" asio crash. That means I have to change the sync mode and everything is fine again - just for a few minutes. It is not a latency related problem, because it happens with every latency that I choose. The cpu load increases a lot for less than a half second. None of my VST-plugins causes that much cpu load. Usually I can work even on big projects at around 8 ms latency with no problems. Some facts about my actual system: AM2 mainboard, amd athlon 64 x2 5200+, 2GB Ram DDR2, Audigy 2ZS, KX 3538m, WinXP Pro SP2 On my old system the same things happend. This was a Athlon XP 1800+ with 1GB Ram DDR and 3538m too. Can anyone help me to find out the reason of this problem? Is it kx or WinXP related?

Jul 16, 2007, 01:06 AM	#2
freechess DriverHeaven Newbie Join Date: Feb 2007 Posts: 15 Rep Power: 0 System Specs	Quite similar problem with 3534f on XP I'm afraid that won't help you, but I have a similar crackling problem: When I load a session in Adobe Audition 2.0 (i.e. 3 tracks - recorded in ASIO - 48kHz - 32bit - Duration: 5mins) and play it, I have to face.. 1.) a crackling/popping sound until 2.) it's kind of "freezing" more and more - means the tempo divides into half, quarter, eighth etc. until it gets stuck almost completely, which sounds terrible - as you can imagine.. After pushing the "Pause"-Button twice - playback continues to normal tempo (!) until the next sko weird stuttering.. So I have to play through the 5mins, always preparing to push the "Pause"-Button twice, which is no fun at all. However - after going through that - I start the Playback from the beginning, and the whole session works just fine. Why this indispensable first "test run"? THX for thoughts.. __________________ DRIVERS: KX 3538m CHIPSET: Intel 865G SOUND: A2ZS, M-AUDIO Fast Track Ultra OS: Microsoft Windows XP Pro (Service Pack 3) Ableton LIVE 7.0.3 Adobe Audition 1.5/3.0 Guitar pro 5.2 Last edited by freechess; Jul 18, 2007 at 10:26 PM.

Jul 26, 2007, 11:02 AM	Thread Starter #3
BuzzT HardwareHeaven Junior Member Join Date: Aug 2006 Location: Germany Posts: 27 Rep Power: 0	I found out that the problem depends on the asio sync mode. Before I only used the 10k2 modes. Now I use "Map/Timer/Event" and there are no errors at all. Even @ 4ms (!). Could anyone please explain the difference between the 10k1 and 10k2 sync modes? Thanks.