Kx cruches after every reboot!! HELP!!

dmitry_v · Oct 19, 2007, 12:36 PM

Hello!
Please help me to resolve my problem!

I succesfully install Kx 3538m driver for my Audigi 2, but after sys reboot i have error msg:
"kX devices not found. Reinstall the drivers.
kX error: Error initializing WinMM subsystem"

I try to reinstall Kx 4-5 times; try to change PCI slot for Audigi2; reinstall WinXPsp2; test HDD whit SnM, MHDD; test RAM whit memtest-88v3.3, GoldMemory... but its same problem after reboot!!

My sys:
WinXP_sp2
MB i845 award phoenix bios 6.00PG
hdd maxtor 160Gb
ram SDRAM 256M+128M tranceend
cd/dvd-rw asus 1608
nVidia GFmx440 (had tryin to replace by mx200)
Audigi2

P.S. Before i have 10k1 SBlive 5.1 and its all OK in same Kx driver (3538m)

Thanks for help!!!

Russ · Oct 19, 2007, 07:56 PM

It sounds like it may be a model that is not supported by kX, do you know the model number (SB0xxx) of the card?

dmitry_v · Oct 23, 2007, 06:37 AM

The model of the card is SB0240 (so is written on board) but kx writes that this SB0224. Yesterday I have installed 3539: all works, but I can not change master volume by buttons on multimedia keyboard. Whatever its OK! at last) May be 3538 is not support SB0240...

Russ · Oct 24, 2007, 01:16 AM

Quote:

Originally Posted by dmitry_v

The model of the card is SB0240 (so is written on board) but kx writes that this SB0224. Yesterday I have installed 3539: all works, but I can not change master volume by buttons on multimedia keyboard. Whatever its OK! at last) May be 3538 is not support SB0240...

Something is not right there...

SB0240 and SB0224 are very different models (one is a Live! 5.1 and the other is an Audigy 2). Are you sure that it does not say SB0244?

Also, the SB0240 should work with 3538.

dmitry_v · Oct 24, 2007, 07:16 AM

Yes this strange. But I certain that this A2 (on processor is written Audigi 2), I soon attaching the photo of the card...
Sometimes when i turn on the computer, kx steel gives error msg "kX devices not found",
and i need to reboot the system... after reboot its OK....

Russ · Oct 24, 2007, 09:35 AM

Aside from the model number strangeness, it sounds like there is a problem with the seating of the card in the PCI slot. I would remove the card and re-seat it in the slot (or (preferably) try another slot if possible).

Also make sure that Plug and Play is turned off in your computers BIOS.

Oct 19, 2007, 12:36 PM	#1
dmitry_v DriverHeaven Newbie Join Date: Oct 2007 Posts: 5 Rep Power: 0	Kx cruches after every reboot!! HELP!! Hello! Please help me to resolve my problem! I succesfully install Kx 3538m driver for my Audigi 2, but after sys reboot i have error msg: "kX devices not found. Reinstall the drivers. kX error: Error initializing WinMM subsystem" I try to reinstall Kx 4-5 times; try to change PCI slot for Audigi2; reinstall WinXPsp2; test HDD whit SnM, MHDD; test RAM whit memtest-88v3.3, GoldMemory... but its same problem after reboot!! My sys: WinXP_sp2 MB i845 award phoenix bios 6.00PG hdd maxtor 160Gb ram SDRAM 256M+128M tranceend cd/dvd-rw asus 1608 nVidia GFmx440 (had tryin to replace by mx200) Audigi2 P.S. Before i have 10k1 SBlive 5.1 and its all OK in same Kx driver (3538m) Thanks for help!!! Last edited by dmitry_v; Oct 19, 2007 at 12:52 PM.

Oct 23, 2007, 06:37 AM	Thread Starter #3
dmitry_v DriverHeaven Newbie Join Date: Oct 2007 Posts: 5 Rep Power: 0	Its work!!! The model of the card is SB0240 (so is written on board) but kx writes that this SB0224. Yesterday I have installed 3539: all works, but I can not change master volume by buttons on multimedia keyboard. Whatever its OK! at last) May be 3538 is not support SB0240...

Oct 19, 2007, 07:56 PM	#2
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,562 Rep Power: 62	It sounds like it may be a model that is not supported by kX, do you know the model number (SB0xxx) of the card?

Oct 24, 2007, 07:16 AM	Thread Starter #5
dmitry_v DriverHeaven Newbie Join Date: Oct 2007 Posts: 5 Rep Power: 0	Yes this strange. But I certain that this A2 (on processor is written Audigi 2), I soon attaching the photo of the card... Sometimes when i turn on the computer, kx steel gives error msg "kX devices not found", and i need to reboot the system... after reboot its OK....

Oct 24, 2007, 09:35 AM	#6
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,562 Rep Power: 62	Aside from the model number strangeness, it sounds like there is a problem with the seating of the card in the PCI slot. I would remove the card and re-seat it in the slot (or (preferably) try another slot if possible). Also make sure that Plug and Play is turned off in your computers BIOS.