CD digital problem after hibernate

Ath0 · Feb 17, 2004, 04:10 PM

The CD digital channel becomes disabled (no sound; mute/unmute and changing its level doesn't make any difference) after I bring my computer out of hibernation. The channel works fine when I boot fresh into Windows (XP pro w/o SP1).

The AC97 analog CD channel doesn't have this problem, but it's not routed to my headphones output unless I unmute AC97 in the "ins 'n' outs" page of the mixer. Doing that however 'doubles' the output on my desktop speakers (front analog out). So instead of changing settings back and forth I'd rather use CD digital which works perfectly until hibernation.

Here's the info dump from the kX About dialog:

----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Dec 4 2003 21:02:54
Driver Version: 5.10.00.3536 - debug
DB Name:LiveBay1
CT4760 10k1 [dc00]
PCI Information:
Device: 21102 Subsys: 80401102 ChipRev: 8
Card has MPU device
Card HAS AC97 codec
Codec name: SigmaTel STAC9721/23
3D Extension: SigmaTel 3D Enhancement
Codec is 2.0 compliant
Capabilities[6940] :
DAC resolutions : -16-bit- -18-bit-
ADC resolutions : -16-bit- -18-bit-
Ext Capabilities [200]: -slot/DAC mappings-
Port: dc00 Irq: 0x16(22)
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
GSIF buffer: 256 samples
OS version: [2 5 1 ; 2 5 1 ; 156 148]
----------------------------------------------------

**Eugene Gavrilov** · Feb 18, 2004, 12:20 AM

please check I/O Status window - when CDSPDIF is working and when it is not

/Eugene

Ath0 · Feb 18, 2004, 02:10 AM

The data in the I/O status window doesn't change whether CDSPDIF is working or not. It's always:

SPDIF Inputs:
spdif A: unused
spdif B: unused
spdif C: unused or same as B
I2S Inputs:
0: 0 1: 0 2: 0
SPDIF Outputs:
0: 2109204 1: 2109204 2: 2109204 (@48000 Hz)

**Eugene Gavrilov** · Feb 18, 2004, 11:52 PM

that's a little bit strange, since the SPDIF status of your CD is invalid...
re-check the status when there's audio playing

/E

BogdanRa · Mar 12, 2004, 02:59 PM

There is a common "pleasure" of the XP Hybernation and Creative boards. I am also having problem with the Rear ones after I am waking may computer from sleep/hybernation mode

Feb 17, 2004, 04:10 PM	#1
Ath0 DriverHeaven Newbie Join Date: Feb 2004 Location: Istanbul, TR Posts: 2 Rep Power: 0	CD digital problem after hibernate The CD digital channel becomes disabled (no sound; mute/unmute and changing its level doesn't make any difference) after I bring my computer out of hibernation. The channel works fine when I boot fresh into Windows (XP pro w/o SP1). The AC97 analog CD channel doesn't have this problem, but it's not routed to my headphones output unless I unmute AC97 in the "ins 'n' outs" page of the mixer. Doing that however 'doubles' the output on my desktop speakers (front analog out). So instead of changing settings back and forth I'd rather use CD digital which works perfectly until hibernation. Here's the info dump from the kX About dialog: ----Hardware / Software configuration--------------- Driver Name:kX Audio Driver (Debug) Driver Date: Dec 4 2003 21:02:54 Driver Version: 5.10.00.3536 - debug DB Name:LiveBay1 CT4760 10k1 [dc00] PCI Information: Device: 21102 Subsys: 80401102 ChipRev: 8 Card has MPU device Card HAS AC97 codec Codec name: SigmaTel STAC9721/23 3D Extension: SigmaTel 3D Enhancement Codec is 2.0 compliant Capabilities[6940] : DAC resolutions : -16-bit- -18-bit- ADC resolutions : -16-bit- -18-bit- Ext Capabilities [200]: -slot/DAC mappings- Port: dc00 Irq: 0x16(22) Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb GSIF buffer: 256 samples OS version: [2 5 1 ; 2 5 1 ; 156 148] ----------------------------------------------------

Mar 12, 2004, 02:59 PM	#5
BogdanRa DriverHeaven Newbie Join Date: Mar 2004 Location: Bucarest Posts: 7 Rep Power: 0	There is a common "pleasure" of the XP Hybernation and Creative boards. I am also having problem with the Rear ones after I am waking may computer from sleep/hybernation mode __________________ _________________ Processor: P4 Processor 2.4GHz w/ 512K L2 Advanced Transfer Cache and 800MHz FSB Memory: 512MB DDR DDRAM Double Rate Hard Drive: 80GB UATA133 7200RPM Hard Drive ; SATA RAID Stripe :2x80 Gb Optical Drive: 16x/48x/2.4/2.4 DVD+RW SONY drive and 40x/24x/40x CD-RW TEAC XP PRO Edition AntiVirus Software: NAV 2004 Monitor 19 inches BELINEA MATROX MARVEL g400TV Sound System: SoundBlaster Audigy Audio w/ IEEE 1394 powered by KX Cable Modem Zyrix, Hercules Action DV -

Feb 18, 2004, 12:20 AM	#2
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	please check I/O Status window - when CDSPDIF is working and when it is not /Eugene

Feb 18, 2004, 02:10 AM	Thread Starter #3
Ath0 DriverHeaven Newbie Join Date: Feb 2004 Location: Istanbul, TR Posts: 2 Rep Power: 0	The data in the I/O status window doesn't change whether CDSPDIF is working or not. It's always: SPDIF Inputs: spdif A: unused spdif B: unused spdif C: unused or same as B I2S Inputs: 0: 0 1: 0 2: 0 SPDIF Outputs: 0: 2109204 1: 2109204 2: 2109204 (@48000 Hz)

Feb 18, 2004, 11:52 PM	#4
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,106 Rep Power: 73	that's a little bit strange, since the SPDIF status of your CD is invalid... re-check the status when there's audio playing /E