Remote control works only once !

kronky · Mar 21, 2004, 01:51 PM

Quote:

let's try to track this bug once again -- start a new topic in the 'bug reports' section of the forum

Done

Pseudo Psy · Mar 21, 2004, 03:14 PM

A constant I see among people having problem with the remote seems to be Win2000 (sp4?)

I'm using an Audigy Platinum Ex (SB0090) under Win2000 sp4, and the remote, as withothers, works only once after starting the kx mixer, while it works ok with Creative drivers.

Am I wrong? Are the people having problems with the remote are ALL using Windows 2000? Which service pack?

kronky · Mar 21, 2004, 04:38 PM

Win2000 SP4 for me...

Note : This topic begins here

ash · Mar 22, 2004, 12:38 PM

Quote:

A constant I see among people having problem with the remote seems to be Win2000 (sp4?)

I'm using an Audigy Platinum Ex (SB0090) under Win2000 sp4, and the remote, as withothers, works only once after starting the kx mixer, while it works ok with Creative drivers.

Am I wrong? Are the people having problems with the remote are ALL using Windows 2000? Which service pack?

that's correct in my case.

i started with win2000 sp3 and i don't think it worked more than once then either. I never realised it was supposed to work as the remote says under construction.

**Eugene Gavrilov** · Mar 23, 2004, 01:23 AM

can anybody experiencing the problem verify if it is OS-specific? [that is, test it under the same release of the kX Driver, but under a different OS? such as Win9X or XP?]

/E

bling · Mar 31, 2004, 09:47 AM

ill try xp, ill give my pc a format in a few weeks

ash · Apr 18, 2004, 12:39 PM

It would seem this problem is OS specific.

I have just tested under XP Home Edition SP1 and the remote control works fine whereas under my old Win2000 SP4 it works only once. A Win2000 SP4 problem it would seem.

kronky · May 5, 2004, 08:24 PM

Quote:

Originally posted by bling
ill try xp, ill give my pc a format in a few weeks

What's new ?
Does the bug disappear with winXP ?

miffokarnevalen · May 17, 2004, 11:09 PM

I don't know if this problem is related to the remote control issue (that I'm also having problems with) but...

I have an Audigy 2 Platinum EX. And as you've probably allready figured out the remote isn't working for me either. If that wasn't enough none of the controls on the breakout box is working. Not the volume knob (including muting) nor the CMSS button. Nor does the auto mute when the headphones are plugged in work.
The inputs seem to work just fine though. The mic preamp volume of course also works.

The monitor does not show anything at all when pressing buttons on the remote or turning/pushing the controls on the BOB.

It would be great if this problem could be solved as these drivers looks very promising (I haven't used them for so long.)

Some more information:
----------------------------------------------------
Current skin: Aqua Skin
Skin Author: Eugene Gavrilov
----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Feb 17 2004 00:43:22
Driver Version: 5.10.00.3537 - debug
DB Name:Aud2ELiveBay
SB0280 10k2 [fe40]
PCI Information:
Device: 41102 Subsys: 10051102 ChipRev: 4
Card is '10k2'
Card has MPU device
Card model is '5.1'
Card is Audigy2-compatible
Card is [Audigy2] Platinum Ex
Card HAS NO AC97 codec
Port: fe40 Irq: 0x9(9)
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
GSIF buffer: 256 samples
OS version: [2 5 0 Service Pack 4; 2 5 0 Service Pack 4; 156 148]
----------------------------------------------------

NightBreed · May 17, 2004, 11:51 PM

Since the addtion of remote functionality, I've never had it cut out. Im using winXP with the latest sp2. Even before the service patch it never cut out. I've also tried it with the longhorn beta :S alpha builds and still all is go...

Pseudo Psy · Jul 9, 2004, 03:36 AM

I finally got to install WinXP and it solved my remote problems I had under Win2000. Yah

bling · Jul 25, 2004, 11:35 AM

looks like a bug with win2k sp3-4? maybe its just a win2k bug period. yeah im still on 2k here, and the controller still only works once. pretty minor bug, but still annoying.

green-ghost · Dec 26, 2004, 01:41 AM

I have this problem too... (Win2Ksp4, kX 3537)

(EDIT: Issue also exists in version 3538h)

After initial load of mixer, the first press of the remote will work, thereafter it's ignored. Quit mixer fully, reload mixer, first remote press works again.

(EDIT: Although the further remote control presses doesn't function, it does cause the toast window to pop up with the headphone/speaker icons and a question mark (the identical toast which pops up if I plug or unplug my headphones, which incidentally only mute speakers when plugged in and do not unmute on removal...))

----------------------------------------------------
Current skin: Aqua Skin
Skin Author: Eugene Gavrilov
----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Feb 17 2004 00:43:22
Driver Version: 5.10.00.3537 - debug
DB Name:LiveBay2
SB0240 10k2 [dc00]
PCI Information:
Device: 41102 Subsys: 10021102 ChipRev: 4
Card is '10k2'
Card has MPU device
Card model is '5.1'
Card is Audigy2-compatible
Card HAS AC97 codec
Codec name: SigmaTel STAC9721/23
3D Extension: SigmaTel 3D Enhancement
Codec is 2.0 compliant
Capabilities[6940] :
DAC resolutions : -16-bit- -18-bit-
ADC resolutions : -16-bit- -18-bit-
Ext Capabilities [200]: -slot/DAC mappings-
Port: dc00 Irq: 0x14(20)
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
GSIF buffer: 256 samples
OS version: [2 5 0 Service Pack 4; 2 5 0 Service Pack 4; 156 148]
----------------------------------------------------

cloned · Feb 27, 2005, 10:58 AM

I confirm the existence of the bug. Audigy2/Win2KSP4/kX3538h

ojlehtin · Mar 5, 2005, 11:08 PM

Ok people... I don't know if this is the case with you, but I had this problem earlier on and found a "solution", which was linked to my midi keyboard. As long as the keyboard is connected AND turned off, the remote does not work.
This issue has been covered in some earlier threads if I remember correct. Also, I believe Eugene commented on the issue and said it was in some sense inevitable problem concering some techical "things" (don't remember any details)...
Anyways, having the midi keyboard turned on makes the trouble go away.

Cheers,
Oswald

ps. Check out our band Särö in the Powered by kX -section

bzdang · Jun 18, 2005, 06:52 AM

On my system the remote works first button press only, kx3537 + win2k/sp4 + SB0092.

Monitor Reader thread started
Monitor Remote reader thread started
9.522276 Default kx_wdm: [CMiniportCtrl::NewStream]
15.646079 Win32 RemoteIR/MMKeyboard message: start/menu
Monitor -- end --

After the first button press the remote has no effect and the monitor shows no change.
I will be very happy if it is possible to fix this, as I must continue to use w2k for a long time.

green-ghost · Jul 18, 2005, 12:36 PM

Quote:

Originally Posted by ojlehtin

This issue has been covered in some earlier threads if I remember correct. Also, I believe Eugene commented on the issue and said it was in some sense inevitable problem concering some techical "things" (don't remember any details)...
Anyways, having the midi keyboard turned on makes the trouble go away.

Thanks for your idea - too bad I don't have a midi kb... lol

Technical things? Doesn't sound very likely. The remote does work once for each restart of the mixer so it seems to be just a bug. Eugene (understandably, I guess) appears to work on bugs affecting musos more than others, but it is a bit frustrating that this bug has been open for so long.

Apparently moving to XP would solve the problem, but that's not really an option for me on this PC.

Maybe Eugene could start up a "cash for bugs" system and let us know how much it will cost to get it fixed?

Ne3s23p2 · Mar 9, 2008, 01:22 PM

Same problem here, remote only works once, but I must keep 2k because XP crashes on installation on my motherboard. I have tried without success 3537,3538l, 3539 with w2k patch. It can't be a hardware problem since remote was fully functional in another PC with XP, and in this one with Linux (Ubuntu-Studio in my case) and LIRC. I will try mods of Creative software from YouP-Pax. Sorry to say goodbye to kX

Update: Youp-Pax's A4 patched drivers & apps install well but I still can't use the remote because other problems appear

: Entertainment Center is too hungry and asks for a recent graphics card. I will have to hack the 2U rackmount cast (full with cards and risers), add a recent PCI graphics card, or throw a new motherboard/CPU/RAM (BTW hard to find MBs without crappy onboard audio these days, maybe high-end server MBs).

Maddogg6 · Mar 9, 2008, 11:58 PM

Just tested in WinXP, kX Version: 5, 10, 00, 3538 - debug Compiled: Jan 22 2007 03:58:47 - works as expected...V3538M If I am not mistaken.

Test circumstance....
Record MIDI IN from kX Control INPUT port.... MIDI sysex data records as expected, multiple times, multiple keys at a time.

Ne3s23p2 · Mar 11, 2008, 07:53 PM

Sorry for kX on w2k. I downloaded the original Audigy + Drive CD and installed RemoteCenter which is perfect for my needs and does not require a recent graphics card. But their PlayCenter is crappy and does not need to be installed to play mp3s. RemoteCenter can play them alone, control Winamp, change volume, change EAX settings, all with OSD. If someone has a similar problem and can't use kX and needs RemoteCenter I can upload it somewhere.
Update: remote works a bit longer but stops responding sooner or later, then RemoteCenter has to be restarted. So this may not really be KX's fault but poor testing of comunication between hardware and software in W2K (the hardware must not be guilty, it is only an infrared MIDI IN interface).

Mar 21, 2004, 04:38 PM	Thread Starter #3
kronky DriverHeaven Newbie Join Date: Mar 2004 Posts: 8 Rep Power: 0	Win2000 SP4 for me... Note : This topic begins here __________________ Sorry for my bad english ;-)

May 17, 2004, 11:51 PM	#10
NightBreed DriverHeaven Addict Join Date: May 2003 Location: Philadelphia, PA Posts: 380 Rep Power: 0	can anybody experiencing the problem verify if it is OS-specific? Since the addtion of remote functionality, I've never had it cut out. Im using winXP with the latest sp2. Even before the service patch it never cut out. I've also tried it with the longhorn beta :S alpha builds and still all is go...

Dec 26, 2004, 01:41 AM	#13
green-ghost DriverHeaven Newbie Join Date: Dec 2004 Posts: 2 Rep Power: 0	current status on this bug? I have this problem too... (Win2Ksp4, kX 3537) (EDIT: Issue also exists in version 3538h) After initial load of mixer, the first press of the remote will work, thereafter it's ignored. Quit mixer fully, reload mixer, first remote press works again. (EDIT: Although the further remote control presses doesn't function, it does cause the toast window to pop up with the headphone/speaker icons and a question mark (the identical toast which pops up if I plug or unplug my headphones, which incidentally only mute speakers when plugged in and do not unmute on removal...)) ---------------------------------------------------- Current skin: Aqua Skin Skin Author: Eugene Gavrilov ----Hardware / Software configuration--------------- Driver Name:kX Audio Driver (Debug) Driver Date: Feb 17 2004 00:43:22 Driver Version: 5.10.00.3537 - debug DB Name:LiveBay2 SB0240 10k2 [dc00] PCI Information: Device: 41102 Subsys: 10021102 ChipRev: 4 Card is '10k2' Card has MPU device Card model is '5.1' Card is Audigy2-compatible Card HAS AC97 codec Codec name: SigmaTel STAC9721/23 3D Extension: SigmaTel 3D Enhancement Codec is 2.0 compliant Capabilities[6940] : DAC resolutions : -16-bit- -18-bit- ADC resolutions : -16-bit- -18-bit- Ext Capabilities [200]: -slot/DAC mappings- Port: dc00 Irq: 0x14(20) Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb GSIF buffer: 256 samples OS version: [2 5 0 Service Pack 4; 2 5 0 Service Pack 4; 156 148] ---------------------------------------------------- Last edited by green-ghost; Dec 28, 2004 at 08:18 AM.

Mar 5, 2005, 11:08 PM	#15
ojlehtin Kx User Join Date: Sep 2003 Location: Finland Posts: 31 Rep Power: 0	Ok people... I don't know if this is the case with you, but I had this problem earlier on and found a "solution", which was linked to my midi keyboard. As long as the keyboard is connected AND turned off, the remote does not work. This issue has been covered in some earlier threads if I remember correct. Also, I believe Eugene commented on the issue and said it was in some sense inevitable problem concering some techical "things" (don't remember any details)... Anyways, having the midi keyboard turned on makes the trouble go away. Cheers, Oswald ps. Check out our band Särö in the Powered by kX -section __________________ Oswald Last edited by ojlehtin; Mar 6, 2005 at 11:39 AM.

Mar 9, 2008, 01:22 PM	#18
Ne3s23p2 DriverHeaven Newbie Join Date: Mar 2008 Posts: 2 Rep Power: 0	Same problem here, remote only works once, but I must keep 2k because XP crashes on installation on my motherboard. I have tried without success 3537,3538l, 3539 with w2k patch. It can't be a hardware problem since remote was fully functional in another PC with XP, and in this one with Linux (Ubuntu-Studio in my case) and LIRC. I will try mods of Creative software from YouP-Pax. Sorry to say goodbye to kX Update: Youp-Pax's A4 patched drivers & apps install well but I still can't use the remote because other problems appear : Entertainment Center is too hungry and asks for a recent graphics card. I will have to hack the 2U rackmount cast (full with cards and risers), add a recent PCI graphics card, or throw a new motherboard/CPU/RAM (BTW hard to find MBs without crappy onboard audio these days, maybe high-end server MBs). Last edited by Ne3s23p2; Mar 9, 2008 at 11:03 PM.

Mar 21, 2004, 03:14 PM	#2
Pseudo Psy DriverHeaven Junior Member Join Date: Jun 2003 Location: Canada Posts: 26 Rep Power: 0	A constant I see among people having problem with the remote seems to be Win2000 (sp4?) I'm using an Audigy Platinum Ex (SB0090) under Win2000 sp4, and the remote, as withothers, works only once after starting the kx mixer, while it works ok with Creative drivers. Am I wrong? Are the people having problems with the remote are ALL using Windows 2000? Which service pack?

Mar 23, 2004, 01:23 AM	#5
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	can anybody experiencing the problem verify if it is OS-specific? [that is, test it under the same release of the kX Driver, but under a different OS? such as Win9X or XP?] /E

Mar 31, 2004, 09:47 AM	#6
bling DriverHeaven Junior Member Join Date: Dec 2003 Posts: 24 Rep Power: 0	ill try xp, ill give my pc a format in a few weeks

Apr 18, 2004, 12:39 PM	#7
ash DriverHeaven Newbie Join Date: Dec 2003 Posts: 11 Rep Power: 0	It would seem this problem is OS specific. I have just tested under XP Home Edition SP1 and the remote control works fine whereas under my old Win2000 SP4 it works only once. A Win2000 SP4 problem it would seem.

May 17, 2004, 11:09 PM	#9
miffokarnevalen DriverHeaven Newbie Join Date: May 2004 Posts: 1 Rep Power: 0	I don't know if this problem is related to the remote control issue (that I'm also having problems with) but... I have an Audigy 2 Platinum EX. And as you've probably allready figured out the remote isn't working for me either. If that wasn't enough none of the controls on the breakout box is working. Not the volume knob (including muting) nor the CMSS button. Nor does the auto mute when the headphones are plugged in work. The inputs seem to work just fine though. The mic preamp volume of course also works. The monitor does not show anything at all when pressing buttons on the remote or turning/pushing the controls on the BOB. It would be great if this problem could be solved as these drivers looks very promising (I haven't used them for so long.) Some more information: ---------------------------------------------------- Current skin: Aqua Skin Skin Author: Eugene Gavrilov ----Hardware / Software configuration--------------- Driver Name:kX Audio Driver (Debug) Driver Date: Feb 17 2004 00:43:22 Driver Version: 5.10.00.3537 - debug DB Name:Aud2ELiveBay SB0280 10k2 [fe40] PCI Information: Device: 41102 Subsys: 10051102 ChipRev: 4 Card is '10k2' Card has MPU device Card model is '5.1' Card is Audigy2-compatible Card is [Audigy2] Platinum Ex Card HAS NO AC97 codec Port: fe40 Irq: 0x9(9) Playback buffer: 20a0 Record buffer: 4000 Number of AC3 buffers: 4 Tank memory: 256 kb GSIF buffer: 256 samples OS version: [2 5 0 Service Pack 4; 2 5 0 Service Pack 4; 156 148] ----------------------------------------------------

Jul 9, 2004, 03:36 AM	#11
Pseudo Psy DriverHeaven Junior Member Join Date: Jun 2003 Location: Canada Posts: 26 Rep Power: 0	I finally got to install WinXP and it solved my remote problems I had under Win2000. Yah

Jul 25, 2004, 11:35 AM	#12
bling DriverHeaven Junior Member Join Date: Dec 2003 Posts: 24 Rep Power: 0	looks like a bug with win2k sp3-4? maybe its just a win2k bug period. yeah im still on 2k here, and the controller still only works once. pretty minor bug, but still annoying.

Feb 27, 2005, 10:58 AM	#14
cloned DriverHeaven Newbie Join Date: Oct 2004 Posts: 1 Rep Power: 0	I confirm the existence of the bug. Audigy2/Win2KSP4/kX3538h

Jun 18, 2005, 06:52 AM	#16
bzdang DriverHeaven Junior Member Join Date: Mar 2003 Location: Toronto Canada Posts: 36 Rep Power: 0	On my system the remote works first button press only, kx3537 + win2k/sp4 + SB0092. Monitor Reader thread started Monitor Remote reader thread started 9.522276 Default kx_wdm: [CMiniportCtrl::NewStream] 15.646079 Win32 RemoteIR/MMKeyboard message: start/menu Monitor -- end -- After the first button press the remote has no effect and the monitor shows no change. I will be very happy if it is possible to fix this, as I must continue to use w2k for a long time.

Mar 9, 2008, 11:58 PM	#19
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	Just tested in WinXP, kX Version: 5, 10, 00, 3538 - debug Compiled: Jan 22 2007 03:58:47 - works as expected...V3538M If I am not mistaken. Test circumstance.... Record MIDI IN from kX Control INPUT port.... MIDI sysex data records as expected, multiple times, multiple keys at a time.

Mar 11, 2008, 07:53 PM	#20
Ne3s23p2 DriverHeaven Newbie Join Date: Mar 2008 Posts: 2 Rep Power: 0	Sorry for kX on w2k. I downloaded the original Audigy + Drive CD and installed RemoteCenter which is perfect for my needs and does not require a recent graphics card. But their PlayCenter is crappy and does not need to be installed to play mp3s. RemoteCenter can play them alone, control Winamp, change volume, change EAX settings, all with OSD. If someone has a similar problem and can't use kX and needs RemoteCenter I can upload it somewhere. Update: remote works a bit longer but stops responding sooner or later, then RemoteCenter has to be restarted. So this may not really be KX's fault but poor testing of comunication between hardware and software in W2K (the hardware must not be guilty, it is only an infrared MIDI IN interface). Last edited by Ne3s23p2; Mar 12, 2008 at 02:18 PM.