3538, no sound just peeeeeeeeeeeeeeep

RyoBerlin · Feb 5, 2006, 01:08 PM

Version: 5, 10, 00, 3538 - debug
Kompiliert: Jul 14 2005 17:05:13
-------------------

Hi there,

i use Dvb-S and sometimes (most times...) if i change a channel.. or play a videofile and jump forward or back or open another ... everytime the sounds have do start now i get sometimes no sound but only containious beep ....... from the speakers...

The only think i can do is to Restart my Windows, then the Sound is back.

Using a SoundBlaster Audigy1 with WindowsXP SP2.

With Linux there are no Sound Problems. So its a Problem with the drivers.
I was first thinkig its because of my SkyStar2 DVB-S Card.. but the same problem is if i dont c TV and just play Video Files... i open.. i open.. and anywhere anytime i open a other file.. peeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee........... .....
Restart...

TERRIBLE!

What can i do?
-----------------------------

Hallo da,

ich nutze DVB-S und manchmal (meistens) wenn ich den Kanal wechsel oder ein Videofile abspiele und vor und zurückspule oder ein anderes Öffne... jedesmal wenn der Sound also neu starten muss hab ich manchmal keinen Sound mehr sondern nur noch ein Pfeifen.. Pieeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.......... ...

Das einzige was ich dann noch tun kann ist Windows neu zu starten, dann ist der Sound zurück.

Ich nutze eine SoundBlaster Audigy1 mit Windows XP SP2.

Mit Linux habe ich keine Soundproble,e. So muss es also ein Treiberproblem sein.
Ich dachte erst es liegt an meiner SkyStar2 DVB-S Karte... aber dasselbe Problem habe ich wenn ich kein TV schaue sondern nur Videofiles abspiele.. ich öffne eins.. ein anderes.. und irgendwo irgendwann wieer PIIIIEEEEEEeeeeeeeeeeeeeeeeeeeeeeeeee.......
Neustart...

SCHRECKLICH!

Was kann ich tun?

Maddogg6 · Feb 5, 2006, 06:14 PM

Is the DVB card sanding audio via a LINE INPUT on your sound card - or is it JUST a PCI card with an antenna input?

If so - try changing the TV software and Media player (maybe is using windows defualt as set in the SOUND and AUDIO DEVICES applet in the windows control panel)
For instance - if its using DirectSound - Try WAVE output - or vise-versa.

RyoBerlin · Feb 5, 2006, 06:27 PM

No, the DVB-S Card has no Outputs

Just PCI with Ant-In

I've the same Problem WITHOUT Using The Card (not seeing TV just play Video with Media Player Classic (MPC)

Maddogg6 · Feb 6, 2006, 05:16 AM

You may want to try KX version 3538J

RyoBerlin · Feb 6, 2006, 09:54 AM

Hi Maddogg6

i'll try it and post if the problem comes again.

ReWired · Feb 6, 2006, 05:53 PM

ot check this thread:
http://www.hardwareheaven.com/bug-reports/26491-constant-beeping-noise-instead-audio-playback.html

RyoBerlin · Feb 7, 2006, 01:33 AM

same problem with 3538J...

@ReWired: i've seen this topic, but its too long and i dont understand everything there...

Maddogg6 · Feb 7, 2006, 02:26 AM

Hmm - did you try changing the windows default audio device?.

edit:

Hmmm....
This isn't making sense - unless its a bug with your card model. - in which case - you should post the info found in the KX help/about screen.

Another thing to look at is you mobos PCI latency. Set it as low as possible

Which makes me wonder what your system specs are (Proccessor/mobo/ramvideo card)

RyoBerlin · Feb 7, 2006, 02:32 AM

it has NOTHING to do with my TV Softwre, because i have the problem also without using TV!!!

now i try the old 3537

Maddogg6 · Feb 7, 2006, 02:34 AM

I edited my post when I realized you had said that.. sorry

RyoBerlin · Feb 7, 2006, 11:23 AM

about info?

"kX Audio Driver, kX Mixer (Debug)
Copyright © Eugene Gavrilov, 2001-2004.
Alle Rechte vorbehalten
Version: 5, 10, 00, 3537 - debug
Kompiliert: Feb 17 2004 00:46:58"

@ the moment installed.

just use it a few hours. No beeb @ the moment. But after starting my system today and start my DVBViewerPro DVB-S (TV) Programm the sound starts and after 1 second it was gone.. no sound... restart... but no beep...

and again... sound gone.....

PCI latency ???

@ the next reboot i'll write it down.

as i say i have a Sempron 2200+ with K7VT4A Pro KT400 MoBo and 768MB DDR-Ram.
A Audigy1 a SkyStar2 and 2 Harddisk Drives 1 DVD-RW a CD-RW and a floppy.
Graphis is a ATI Radeon 9600 @DualMonitor work with 1. TFT and 2. TV (VGa->Scart RGB)

Edit:
try now the
Version: 5, 10, 00, 3536 - debug
Kompiliert: Dec 4 2003 00:14:37

Maddogg6 · Feb 7, 2006, 06:01 PM

Also - have a look in the device manager to see if what devices are sharing the same interupt.

Just to be clear:

You have no problems until after running TV card? - is this correct?

And - your getting exact same behaviour no matter what version of KX you try?

RyoBerlin · Feb 7, 2006, 09:11 PM

i dont think that the DVB-S Card has anything to do with the problem

So.. tryed also the old drivers.. same effect but witout beep... just no sound...

so i'm back to the newest driver (J)

Maddogg6 · Feb 7, 2006, 09:16 PM

Quote:

just use it a few hours. No beeb @ the moment. But after starting my system today and start my DVBViewerPro DVB-S (TV) Programm the sound starts and after 1 second it was gone.. no sound... restart... but no beep...

This makes me think - maybe it does...

but - I guess Im stumped.

RyoBerlin · Feb 7, 2006, 09:23 PM

sometimey i can use my system day 4 day and no problem...

and then.. beeep :-/

**Eugene Gavrilov** · Feb 23, 2006, 11:10 AM

if you encounter such a problem, close all audio applications, open kx console, type 'rv' (reset voices)
then playback any midi file -- watch your 'voice analyzer' window to be 100% sure all the voices were allocated
this should fix the problem in 99% cases
if this fails, unload kxmixer, go to device manager, disable your audio card, re-enable it, then execute 'kxmixer --startup'

nature of this issue is unknown, no fix is planned

E.

Alex/AT · Feb 23, 2006, 02:34 PM

"No fix" is just too bad.

I'm experiencing this issue with 3537 and with 3538 too (and it surely was earlier).

H/w config:

Quote:

----Hardware / Software configuration---------------
Имя драйвера:kX Audio Driver (Debug)
Дата драйвера: Jan 23 2006 01:43:49
Версия драйвера: 5.10.00.3538 - debug
Имя дочерней карты:none
SB0220 10k1 [e400]
PCI Information:
Device: 21102 Subsys: 80671102 ChipRev: a
Card has MPU device
Модель аудио карты 5.1
Card HAS AC97 codec
Codec name: EMicro UNKNOWN (4328)
3D Extension: No 3D Stereo Enhancement
Codec is 2.0 compliant
Capabilities[140] :
DAC resolutions : -16-bit- -18-bit-
ADC resolutions : -16-bit- -18-bit-
Ext Capabilities [280]: -PCM surround DAC- -slot/DAC mappings-
Port: e400 Irq: 0x5(5)
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
GSIF buffer: 256 samples
OS version: [2 5 1 Service Pack 2; 2 5 1 Service Pack 2; 156 148]
----------------------------------------------------

When starting/stopping playback (changing songs in WinAmp is the most common case), it occasionally happens that there is no sound but just -BEEEEEEEEEP- coming from all the speakers.

I found one temporary remedy - I begin starting/stopping playback a lot of times and eventually it gets fixed. But this takes up to 40-60 seconds and it can appear again at any time (even immediately after 'fixing'). I will check if the voice reset helps here.

What can I further check to help you resolve this issue? Have plenty of exp. in 80x86 ASM, some exp. in SoftICE etc. but've almost forgot all Windows internals by now... The issue is serious for me, I'm thinking to go to the shitty integrated ALC650 'cause kX is buggy for me and Creative drivers can't give me 5.1...

BTW. Thanks for the driver A LOT. They saved me from ALC, even if they are buggy.

Feb 5, 2006, 01:08 PM	#1
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	3538, no sound just continiuos beep Version: 5, 10, 00, 3538 - debug Kompiliert: Jul 14 2005 17:05:13 ------------------- Hi there, i use Dvb-S and sometimes (most times...) if i change a channel.. or play a videofile and jump forward or back or open another ... everytime the sounds have do start now i get sometimes no sound but only containious beep ....... from the speakers... The only think i can do is to Restart my Windows, then the Sound is back. Using a SoundBlaster Audigy1 with WindowsXP SP2. With Linux there are no Sound Problems. So its a Problem with the drivers. I was first thinkig its because of my SkyStar2 DVB-S Card.. but the same problem is if i dont c TV and just play Video Files... i open.. i open.. and anywhere anytime i open a other file.. peeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee........... ..... Restart... TERRIBLE! What can i do? ----------------------------- Hallo da, ich nutze DVB-S und manchmal (meistens) wenn ich den Kanal wechsel oder ein Videofile abspiele und vor und zurückspule oder ein anderes Öffne... jedesmal wenn der Sound also neu starten muss hab ich manchmal keinen Sound mehr sondern nur noch ein Pfeifen.. Pieeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.......... ... Das einzige was ich dann noch tun kann ist Windows neu zu starten, dann ist der Sound zurück. Ich nutze eine SoundBlaster Audigy1 mit Windows XP SP2. Mit Linux habe ich keine Soundproble,e. So muss es also ein Treiberproblem sein. Ich dachte erst es liegt an meiner SkyStar2 DVB-S Karte... aber dasselbe Problem habe ich wenn ich kein TV schaue sondern nur Videofiles abspiele.. ich öffne eins.. ein anderes.. und irgendwo irgendwann wieer PIIIIEEEEEEeeeeeeeeeeeeeeeeeeeeeeeeee....... Neustart... SCHRECKLICH! Was kann ich tun? Last edited by RyoBerlin; Feb 5, 2006 at 06:04 PM.

Feb 7, 2006, 11:23 AM	Thread Starter #11
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	about info? "kX Audio Driver, kX Mixer (Debug) Copyright © Eugene Gavrilov, 2001-2004. Alle Rechte vorbehalten Version: 5, 10, 00, 3537 - debug Kompiliert: Feb 17 2004 00:46:58" @ the moment installed. just use it a few hours. No beeb @ the moment. But after starting my system today and start my DVBViewerPro DVB-S (TV) Programm the sound starts and after 1 second it was gone.. no sound... restart... but no beep... and again... sound gone..... PCI latency ??? @ the next reboot i'll write it down. as i say i have a Sempron 2200+ with K7VT4A Pro KT400 MoBo and 768MB DDR-Ram. A Audigy1 a SkyStar2 and 2 Harddisk Drives 1 DVD-RW a CD-RW and a floppy. Graphis is a ATI Radeon 9600 @DualMonitor work with 1. TFT and 2. TV (VGa->Scart RGB) Edit: try now the Version: 5, 10, 00, 3536 - debug Kompiliert: Dec 4 2003 00:14:37 Last edited by RyoBerlin; Feb 7, 2006 at 01:26 PM.

Feb 5, 2006, 06:14 PM	#2
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	Is the DVB card sanding audio via a LINE INPUT on your sound card - or is it JUST a PCI card with an antenna input? If so - try changing the TV software and Media player (maybe is using windows defualt as set in the SOUND and AUDIO DEVICES applet in the windows control panel) For instance - if its using DirectSound - Try WAVE output - or vise-versa.

Feb 5, 2006, 06:27 PM	Thread Starter #3
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	No, the DVB-S Card has no Outputs Just PCI with Ant-In I've the same Problem WITHOUT Using The Card (not seeing TV just play Video with Media Player Classic (MPC)

Feb 6, 2006, 05:16 AM	#4
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	You may want to try KX version 3538J

Feb 6, 2006, 09:54 AM	Thread Starter #5
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	Hi Maddogg6 i'll try it and post if the problem comes again.

Feb 6, 2006, 05:53 PM	#6
ReWired HardwareHeaven Lover Join Date: Nov 2003 Posts: 100 Rep Power: 0	ot check this thread: http://www.hardwareheaven.com/bug-reports/26491-constant-beeping-noise-instead-audio-playback.html

Feb 7, 2006, 01:33 AM	Thread Starter #7
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	same problem with 3538J... @ReWired: i've seen this topic, but its too long and i dont understand everything there...

Feb 7, 2006, 02:26 AM	#8
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	Hmm - did you try changing the windows default audio device?. edit: Hmmm.... This isn't making sense - unless its a bug with your card model. - in which case - you should post the info found in the KX help/about screen. Another thing to look at is you mobos PCI latency. Set it as low as possible Which makes me wonder what your system specs are (Proccessor/mobo/ramvideo card)

Feb 7, 2006, 02:32 AM	Thread Starter #9
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	it has NOTHING to do with my TV Softwre, because i have the problem also without using TV!!! now i try the old 3537

Feb 7, 2006, 02:34 AM	#10
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	I edited my post when I realized you had said that.. sorry

Feb 7, 2006, 06:01 PM	#12
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	Also - have a look in the device manager to see if what devices are sharing the same interupt. Just to be clear: You have no problems until after running TV card? - is this correct? And - your getting exact same behaviour no matter what version of KX you try?

Feb 7, 2006, 09:11 PM	Thread Starter #13
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	i dont think that the DVB-S Card has anything to do with the problem So.. tryed also the old drivers.. same effect but witout beep... just no sound... so i'm back to the newest driver (J)

Feb 7, 2006, 09:23 PM	Thread Starter #15
RyoBerlin DriverHeaven Newbie Join Date: Feb 2006 Posts: 10 Rep Power: 0	sometimey i can use my system day 4 day and no problem... and then.. beeep :-/

Feb 23, 2006, 11:10 AM	#16
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	if you encounter such a problem, close all audio applications, open kx console, type 'rv' (reset voices) then playback any midi file -- watch your 'voice analyzer' window to be 100% sure all the voices were allocated this should fix the problem in 99% cases if this fails, unload kxmixer, go to device manager, disable your audio card, re-enable it, then execute 'kxmixer --startup' nature of this issue is unknown, no fix is planned E.