AMD CPU Guide

Discussion in 'Hardware Discussion & Support' started by BWX, Dec 15, 2003.

  1. BWX

    BWX unplugged

    PR rating -|- Cash,L2,KB -|- Mult -|- FSB -|- MHz -|- Palomino -|- Tbred~A -|- Tbred~B -|- Barton
    ________ ___________ ______ ______ _____ _________ __________ _________ _______

    -3200+ ______ 512 ____ 11.0* _ 200 _ 2200 __________________________________x___

    -3000+ ______ 512 ____ 10.5* _ 200 _ 2100 __________________________________x___

    -3000+ ______ 512 ____ 13.0* _ 166 _ 2167 __________________________________x___

    -2800+ ______ 512 ____ 12.5* _ 166 _ 2083 __________________________________x___

    -2800+ ______ 256 ____ 13.5* _ 166 _ 2250 __________________________x___________

    -2700+ ______ 256 ____ 13.0* _ 166 _ 2167 __________________________x___________

    -2600+ ______ 512 ____ 11.5* _ 166 _ 1917 __________________________________x___

    -2600+ ______ 256 ____ 12.5* _ 166 _ 2083 __________________________x___________

    -2600+ ______ 256 ____ 16.0* _ 133 _ 2133 __________________________x___________

    -2500+ ______ 512 ____ 11.0* _ 166 _ 1833 __________________________________x___

    -2400+ ______ 256 ____ 15.0* _ 133 _ 2000 __________________________x___________

    -2200+ ______ 256 ____ 13.5* _ 133 _ 1800 ________________x_________x___________

    -2100+ ______ 256 ____ 13.0* _ 133 _ 1733 ______x_________x_________x___________

    -2000+ ______ 256 ____ 12.5* _ 133 _ 1667 ______x_________x_________x___________

    -1900+ ______ 256 ____ 12.0* _ 133 _ 1600 ______x_________x_________x___________

    -1800+ ______ 256 ____ 11.5* _ 133 _ 1533 ______x_________x_________x___________

    -1700+ ______ 256 ____ 11.0* _ 133 _ 1466 ______x_________x_________x___________

    -1600+ ______ 256 ____ 10.5* _ 133 _ 1400 ______x_______________________________

    -1500+ ______ 256 ____ 10.0* _ 133 _ 1333 ______x_______________________________


    I saw something to this affect over at guru3d, but the site was not English, so I just took the info from the news page and made a little guild that would work in the forum. I'm going to do something with the colors, etc..... to make it easier to read. Tell me if there any mistakes.

    It took longer than you might think.
  2. FluffyChicken

    FluffyChicken New Member

    If you use notepad to move things around and put it in a {code}{/code} you'll keep all the formatting including tabs
  3. BWX

    BWX unplugged

    I have it laid out in notepad too- But of course it never lines up, even with the correct tabs and everything. In notepad I used "-" instead of "_" , and for some reason the spaces between the charachters never stays same. Not just the tabs. Where are you talking about putting in the {code}{/code}? in the forum or the .txt?

    Plus you can't use more than one space here in the forums, if you have 2 or more spaces in the .txt it doesn't translate.
  4. Bane the ECF

    Bane the ECF New Member

  5. BWX

    BWX unplugged

    I like mine better.:)
  6. toddsmack2k

    toddsmack2k It Never.....

    How about a sticky for a little while! : )
  7. BWX

    BWX unplugged

    Cool!:D

Share This Page