PAX_SBA5_PCDRV_L11_3_01_0044_2015V1.00

Discussion in 'PAX Download - Audigy Series' started by Robert McClelland, Sep 11, 2015.

  1. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,266
    Likes Received:
    247
    Trophy Points:
    88
  2. Twizted_Playa

    Twizted_Playa I Miss My AMIGA 4000t

    Joined:
    Mar 5, 2014
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    1
    is this supposed to be a win10 driver Robert?
     
  3. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,266
    Likes Received:
    247
    Trophy Points:
    88
  4. Twizted_Playa

    Twizted_Playa I Miss My AMIGA 4000t

    Joined:
    Mar 5, 2014
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    1
    sorry it took so long to get back, was in hospital..
    I finally got around to install win 10 and tried driver..it didn't work.. it seems I need one for a audigy2 zs pci. this driver comes up with no supported device found error
     
  5. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,266
    Likes Received:
    247
    Trophy Points:
    88
    You need other older audigy driver I have I make new one soon when I check the site
     
  6. muffe123

    muffe123 New Member

    Joined:
    Jan 16, 2016
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    So is this driver working ?
    Because now I have Kx project on win10 (in win7 compatibility mode) installed, because of changing front/rear output for best quality and don't have enough space to have in front of my case (too much mess with cables)
    Is this possible with this drivers ?
     
  7. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,266
    Likes Received:
    247
    Trophy Points:
    88
    There no way to tell I don't own all creative cards
     
  8. muffe123

    muffe123 New Member

    Joined:
    Jan 16, 2016
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Ok, I know. I have Audigy 2 ZS Gold. Do you know if I can change from front to rear jacks stereo (for headphones) like in kx project? Because on Creative modded one by Daniel K. (Support pack 6.1) it didn't work even with foobar2000 plugin 'move stereo to rear channels'. And if it don't work - I have really weak sound and really low volume in all rear channels (and I try all the configuration - on/off cmss3d, 2.0/headphones/5.1 configuration and turn off all features). And I can't output the sound to the front, because it has some strange connectors (I see that it can be connected through pin-to-pin mod, but I don't want to do it right know).
     
  9. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,266
    Likes Received:
    247
    Trophy Points:
    88
    Up grade to z series ;)
     
  10. muffe123

    muffe123 New Member

    Joined:
    Jan 16, 2016
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Briliant idea! Oh, I forgot, that I just bought this card.
    I can't believe that, I hear it from main moder of drivers.
    But I have solution - install KX Drivers, they work very good.
    Z series is for me rubbish - I prefer AIM cards, have just bought SC8000, and will see what it can do.
     

Share This Page