PAX_SBZ_CD_L13_1_01_10V1.00.7z

Discussion in 'PAX Download - Z/ZX/ZXR' started by Robert McClelland, Apr 10, 2017.

  1. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,289
    Likes Received:
    248
    Trophy Points:
    88
  2. P.a.N.i.C

    P.a.N.i.C New Member

    Joined:
    Feb 7, 2016
    Messages:
    7
    Likes Received:
    4
    Trophy Points:
    3
    Thank you Rob, I'll test today.
     
    Robert McClelland likes this.
  3. LoccOtHaN

    LoccOtHaN Ne01

    Joined:
    Dec 20, 2013
    Messages:
    137
    Likes Received:
    5
    Trophy Points:
    18
    These are based on New Creative 1.01.10 :D THX
     
    Robert McClelland likes this.
  4. EarlZ

    EarlZ New Member

    Joined:
    Jul 20, 2009
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    1
    First time user for PAX drivers SBZ, just uninstall the creative ones and just install this no special setup required?

    EDIT:

    While gaming I noticed slight distortions on the low mids to high bass its very slight but also very noticeable on my MDR1000X, I reverted back to the stock driver for now.
     
    Last edited: Apr 28, 2017
  5. P.a.N.i.C

    P.a.N.i.C New Member

    Joined:
    Feb 7, 2016
    Messages:
    7
    Likes Received:
    4
    Trophy Points:
    3
    No, you shouldn't install these after uninstalling the stock drivers. The stock drivers must be installed first, then use device manager to install these drivers using the method below:

    Via @mohal:
     
  6. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,289
    Likes Received:
    248
    Trophy Points:
    88
    Yep installed stock first then disable driver sign after
     
  7. >GSXR<mrbusa

    >GSXR<mrbusa MY BIKE vvv

    Joined:
    Feb 22, 2004
    Messages:
    2,113
    Likes Received:
    22
    Trophy Points:
    48
    Been awhile sinse I posted because Its not my thing anymore.

    I do like your drivers enough to give feedback so everything goes smooth like normal.

    I was installing the latest set on the Win10 x64 16.215 insider preview and when I updated drivers from device manager with driver signature disable I recieved a BSOD. The system booted and I tried again and was succesful. I double checked and both the controller and card have unsigned drivers now. Its the first release that has done that.

    Thx for all the effort you put into your release.
     
  8. Akaki

    Akaki New Member

    Joined:
    Aug 25, 2015
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    1
    hey guys what do I change to make speakers less loud on set volume? these drivers are too loud.
    and what do I do with so many ini files, for example how do I use Optimize.ini file?

    cheers
     
  9. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,289
    Likes Received:
    248
    Trophy Points:
    88
    where you see the % you can try lower the number :) like 75% go from there
     
  10. Akaki

    Akaki New Member

    Joined:
    Aug 25, 2015
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    1
    Hi Robert,

    That will be in all ini files in main installation folder and reinstall whole driver package or change all ini files inside windows\ system32 folder and reboot pc?

    Or is there a specific ini file that controls main volume?

    And which ini is usually loaded-used by the soundblaster control panel, why are there so many ini files? Do we need to rename them to something specific to be used by default ?

    For example rename optimize.ini to default ini file to be loaded by the driver. In this case what do we rename it to?

    I've been using your drivers since day you made them for many years now, and could never figure how to tweak them.
    Maybe i can finally tweak them :)

    Thank you!
     
  11. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,289
    Likes Received:
    248
    Trophy Points:
    88
    nope you have go threw each inf change volume % it might take while but find 100% then change all to 75% but go replace slow though
     
  12. Akaki

    Akaki New Member

    Joined:
    Aug 25, 2015
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    1
    Thanks for the reply Robert
    I will change all % in all ini files inside system32 folder and reboot, see if it works.
    That is what you meant i assume ?
    No reinstallation needed.
     
  13. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,289
    Likes Received:
    248
    Trophy Points:
    88
    No the just in the main driver not to system files that way you have copy to reinstalled them
     
  14. Akaki

    Akaki New Member

    Joined:
    Aug 25, 2015
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    1
    Hi Robert,

    is it this string ? SoundVolumeAmountLevel=90 ?
    also is there a way to remove all compression, normalization and frequency cutoff of the audio?
    so it does not play around with the audio quality and volume of the sound.

    could you please underline in the photo which file should we adjust:
    upload_2017-8-1_21-46-50.png

    Thank you!
     
  15. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,289
    Likes Received:
    248
    Trophy Points:
    88
    Yup sorry late response, After you change it and save the file and reinstall
     
  16. Kyle2k

    Kyle2k New Member

    Joined:
    Aug 26, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Hi, I'm new here. Need some help, folks. First of all, forgive this brazilian noob and my bad english

    If have a SB Z card installed and my speakers are an old Creative Inspire T7700 in a 5.1 surround configuration (there's no room to put the last two satellite speakers in a 7.1 config). I have two questions:

    1) please, can someone explain to me why the hell I have, in a random occurrence, some of the satellites showing odd sounds, like very low treble or volume in one, then other satellite speaker with a subwoofer sound (instead the normal and expected sound) or even distorted one in another satellite? Like I said, his issue occurs to me randomly, and every driver installation is a surprise. Sometimes, the sound runs just fine, but sometimes, for reasons unknown, I have this issue, even with PAX drivers.

    2) I read that installing the PAX drivers should be done in a complicated way (installing only from the INF files or something like that). Can I install these drivers just by removing the original Creative driver and clicking the "setup.exe" file inside the PAX folder or would that be wrong?

    Thanks in advance.
     
  17. Akaki

    Akaki New Member

    Joined:
    Aug 25, 2015
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    1
    found an app that changes strings in multiple files if it is allowed I will attach it here.

    changed numbers in all ini files in installation folder, reinstalled again and nothing happened.
    Robert how can I tell which INI is in use to modify ?

    could you please make a video on how to tweak and modify files, and which ones?
    that would be awesome!

    remove .zip off the file end extract(it is a free/shareware)
     

    Attached Files:

  18. LoccOtHaN

    LoccOtHaN Ne01

    Joined:
    Dec 20, 2013
    Messages:
    137
    Likes Received:
    5
    Trophy Points:
    18
    Hi ROB :D there are new drivers yet for Win CU ? (New fall Update)
     
  19. Sounds86

    Sounds86 New Member

    Joined:
    Wednesday
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Hello

    I have also installed the new Windows 10 CU update and had an issue with my sound drivers. What I done was totally uninstall my Creative Sound Blaster Control Panel then reinstalled it. I then had an error when installing Robs' YouPAX drivers in the usual fashion, it was solved by going through the driver signature enforcement disabling process as described in the install notes again and now the YouPAX driver installed no problem. All appears to be fine now but Windows Maintenance reports a driver needs to be installed so I just turned off the notification.

    Hope this solves the problems you folks may experience with the new Windows update.
     
  20. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,289
    Likes Received:
    248
    Trophy Points:
    88
    No issues after upgrading from mine today :)
     

Share This Page

visited