DSP Layout suggestions?

Thijs · Feb 25, 2003, 05:30 PM

Some thoughts about the DSP.
I always would think of signal out=hot=red so signal in is blue.
This is not the case with Kx-Dsp and I am not saying it is wrong but for me

it is confusing.
It would also be nice if the window could be rezised to make it bigger.
If you connect "cables" then it would be much easier if you could just click

and disconnect only one side and drag the cable to the other desired in or

out.
Some numbers on the ins and outs would be handy because in the router I cant

say immediatly which is 8 or 9 or whatever.
Unfortunatly this cant be editted which can with the modules itself.
So I named FxBus just sblive because for me that is more how I can imagine

things better.

BiCho · Feb 26, 2003, 05:17 AM

What about doing the full DSP window really big? that way each I/O will have its own label, so you know exactly what gets connected into what. you could even make the plugs and the jacks bigger too! it will be much more easy to connect everything.

what do you think?

kokoon · Feb 26, 2003, 11:11 AM

i think you should just implement the same interface as reaktor has.

Eminos · Feb 26, 2003, 11:19 AM

Why is there a limit on how many effects and such you can have in the DSP??? .../Eminos

eyagos · Feb 26, 2003, 01:04 PM

Because the card memory is limited.

moudi · Feb 26, 2003, 04:05 PM

Quote:

Originally posted by kokoon
i think you should just implement the same interface as reaktor has.

that's the way!!
i agree 100%

moudi

Feb 25, 2003, 05:30 PM	#1
Thijs DriverHeaven Newbie Join Date: Feb 2003 Posts: 2 Rep Power: 0	DSP Layout suggestions? Some thoughts about the DSP. I always would think of signal out=hot=red so signal in is blue. This is not the case with Kx-Dsp and I am not saying it is wrong but for me it is confusing. It would also be nice if the window could be rezised to make it bigger. If you connect "cables" then it would be much easier if you could just click and disconnect only one side and drag the cable to the other desired in or out. Some numbers on the ins and outs would be handy because in the router I cant say immediatly which is 8 or 9 or whatever. Unfortunatly this cant be editted which can with the modules itself. So I named FxBus just sblive because for me that is more how I can imagine things better.

Feb 26, 2003, 11:11 AM	#3
kokoon DriverHeaven Addict Join Date: Feb 2003 Location: slovenia Posts: 269 Rep Power: 0	i think you should just implement the same interface as reaktor has. __________________ [kokoon]

Feb 26, 2003, 05:17 AM	#2
BiCho Audiotecna- Representante Join Date: Dec 2002 Location: Bogota, Colombia Posts: 173 Rep Power: 0	What about doing the full DSP window really big? that way each I/O will have its own label, so you know exactly what gets connected into what. you could even make the plugs and the jacks bigger too! it will be much more easy to connect everything. what do you think?

Feb 26, 2003, 11:19 AM	#4
Eminos DriverHeaven Lover Join Date: Dec 2002 Location: Sweden Posts: 133 Rep Power: 0	Why is there a limit on how many effects and such you can have in the DSP??? .../Eminos

Feb 26, 2003, 01:04 PM	#5
eyagos DriverHeaven Addict Join Date: Dec 2002 Posts: 259 Rep Power: 0	Because the card memory is limited.