How to switch off monitoring?

Bluesbreaker · May 2, 2003, 04:20 PM

Hi everybody,

Please advice how to swicth off monitoring while recording from Line-In?
The matter is that when I record guitar and at the same time
listen to the accompaniment from my PC stereo speakers, the guitar
sound being recoded is played through the speakers as well, and I
almost cannot hear the rhythm I should play to... So far I neither found the way
to switch this monitoring off, nor at least to control its level to make it some quieter.
Thanks in advance!

kx driver version - 5.10. 00.3532
Audio card - SB Live!

kjellviz · May 31, 2003, 12:04 AM

Please help this guy !!! i need that answer too !!!

Gonzo · May 31, 2003, 12:46 AM

Take a look at some routing posibilities at:

http://www.internet.com.uy/rere/main/index.htm

In the general purpose recording setup (the 1st one), you can set the monitoring fader to zero (i.e. you will not hear the input signal) while you're still able to record your line in signal unmodified or with effects.
You should install the custom made mixer first though, but this is explained in the pack.
Route the signals going to the mixer inputs IN1 IN2 IN3 from whatever inputs you are currently using (excepting the MAINBUS wires which should be left where they are connected in the photo)
I hope it works for you, please be sure to read the txt files for some info about how to change the port number...etc...
Gonzo

May 2, 2003, 04:20 PM	#1
Bluesbreaker DriverHeaven Newbie Join Date: May 2003 Posts: 1 Rep Power: 0	How to switch off monitoring? Hi everybody, Please advice how to swicth off monitoring while recording from Line-In? The matter is that when I record guitar and at the same time listen to the accompaniment from my PC stereo speakers, the guitar sound being recoded is played through the speakers as well, and I almost cannot hear the rhythm I should play to... So far I neither found the way to switch this monitoring off, nor at least to control its level to make it some quieter. Thanks in advance! kx driver version - 5.10. 00.3532 Audio card - SB Live!

May 31, 2003, 12:46 AM	#3
Gonzo DriverHeaven Junior Member Join Date: Feb 2003 Location: Uruguay Posts: 57 Rep Power: 0	Take a look at some routing posibilities at: http://www.internet.com.uy/rere/main/index.htm In the general purpose recording setup (the 1st one), you can set the monitoring fader to zero (i.e. you will not hear the input signal) while you're still able to record your line in signal unmodified or with effects. You should install the custom made mixer first though, but this is explained in the pack. Route the signals going to the mixer inputs IN1 IN2 IN3 from whatever inputs you are currently using (excepting the MAINBUS wires which should be left where they are connected in the photo) I hope it works for you, please be sure to read the txt files for some info about how to change the port number...etc... Gonzo Last edited by Gonzo; May 31, 2003 at 01:00 AM.

May 31, 2003, 12:04 AM	#2
kjellviz DriverHeaven Newbie Join Date: Mar 2003 Posts: 1 Rep Power: 0	Please help this guy !!! i need that answer too !!!