Emu Aps Input 3+4 "help!!!"

OLIVER · May 12, 2003, 10:38 AM

HI,

I have an Emu Aps with the breakeout box, within logic I can record inputs 1+2 (on the card) but inputs 3+4 cannot be recorded even though logic recognizes thet there is inputs 3+4. I know this is because I have not set up the dsp routing etc in the KX mixer.

IThe only problem is that I havent a clue ho to do this, it seems so complicated to me and im very technical minded!!

Is there anyone out there who can send me a mixer setting file?

THANK YOU,

OLIVER.

Gonzo · May 13, 2003, 02:37 AM

To the extent of my knowledge, there is just one place where the 3/4 inputs can be located in the KX DSP, they should be represented by a certain pair of connectors on the "prolog" unit.
Sadly I don't know exactly which pair...but it shouldn't be too dificult for you to discover, connect each line on prolog one at a time to the epilog 1/2 (speakers out) until you can hear what you're trying to record. (Beware with feedback though, if you're recording a live mic...)
Then connect this pair to ASIO 3/4 (or WDM) inputs in epilog and you should be done...
Or if you want...take a look at my setups page:

http://www.internet.com.uy/rere/main/index.htm

I didn't do them on an APS card (a simple SBLive OEM is what I own) but there shouldn't be a great difference in the connections.

Good Luck

Gonzo

**Eugene Gavrilov** · May 13, 2003, 09:49 AM

try all the 16 kx inputs one-by-one
note that a3/a4 aren't located on 'kx in 3' & 'kx in 4', but, probably, on 'in 8' and 'in 9'

/Eugene

May 12, 2003, 10:38 AM	#1
OLIVER DriverHeaven Newbie Join Date: May 2003 Location: SOUTH WALES, UK Posts: 2 Rep Power: 0	Emu Aps Input 3+4 "help!!!" HI, I have an Emu Aps with the breakeout box, within logic I can record inputs 1+2 (on the card) but inputs 3+4 cannot be recorded even though logic recognizes thet there is inputs 3+4. I know this is because I have not set up the dsp routing etc in the KX mixer. IThe only problem is that I havent a clue ho to do this, it seems so complicated to me and im very technical minded!! Is there anyone out there who can send me a mixer setting file? THANK YOU, OLIVER.

May 13, 2003, 02:37 AM	#2
Gonzo DriverHeaven Junior Member Join Date: Feb 2003 Location: Uruguay Posts: 57 Rep Power: 0	To the extent of my knowledge, there is just one place where the 3/4 inputs can be located in the KX DSP, they should be represented by a certain pair of connectors on the "prolog" unit. Sadly I don't know exactly which pair...but it shouldn't be too dificult for you to discover, connect each line on prolog one at a time to the epilog 1/2 (speakers out) until you can hear what you're trying to record. (Beware with feedback though, if you're recording a live mic...) Then connect this pair to ASIO 3/4 (or WDM) inputs in epilog and you should be done... Or if you want...take a look at my setups page: http://www.internet.com.uy/rere/main/index.htm I didn't do them on an APS card (a simple SBLive OEM is what I own) but there shouldn't be a great difference in the connections. Good Luck Gonzo

May 13, 2003, 09:49 AM	#3
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,119 Rep Power: 75	try all the 16 kx inputs one-by-one note that a3/a4 aren't located on 'kx in 3' & 'kx in 4', but, probably, on 'in 8' and 'in 9' /Eugene