Sidhu

but not like this!


hI,
im bak on these forums after quite a while (though my last query went unnoticed. hmm)

after enjoying the genius of the Kx drivers on a very lame p3500 machine (on which cund do much but managed to pull of an incredible ammount, i finally did fo in for a new machine around a fortnight bak.

specs:

AMD athlon 2500+ barton 333FSB
MSI nforse2 mobo
maxtor HDD 7200rpm
Kingston Value ram 512 333FSB
Gforse2 dual head (still need another monitor though. Duh!)

previous machine

P3 450
some odd 256 ram
intel chipset some odd mobo.



soundcard : Live!value


OS : dual boot

Win ME running Nuendo 1.5.3
win XP running SX


now,
pleaz take a minute and understand my problem i hope i explain it clear enough.


this is how my routing is done :

Prolog : AC97 L/R out go in Epilog ASIO 0/1
FX bus 0/1 out go in Routing Wave L/R

roputing out front speaker and rear speaker to their corresponding channel in the epilog.


Problem.

1. whatever i have i feeding the line in on the soundcard, plays directly through
the rear speaker output. This happens even when i clear the DSP (nothing
patched nowhere). however the mute line in the AC97 setup works


2. although the rear speakers out plays only when routed through the host
and being monitored so, im very sure that the latency in getting is way
more than the specified 5ms. This is while feeding in audio. I can hear the
delay in the note being played and reproduced over the rear speaker out.

this is not true for the front speakers. though i cant monitor their with FX.
direct feed is what i comprehend.

this is the case with both OS and hosts.

3. i am very sure this was not occuring with my previous machine (including the
latency which was then nonexistent to my ears.)

4. while playing vsti's i think the situation is better. But since im
triggering, i cant say for sure.

i think the latency is around 12-15ms when set to 5ms in the host. when i set the ltency to about 2ms it becomes better.. but deffinately not there.

also whe i first installed Win ME and Nuendo (to chek if i cud replicate the issue i was having with XP/SX) everything seemed to work fine the first time and i was relieved. But then while launchig Nuendo the second time i got the error 'cud not set samplerate, clok to external sync' and things were and again.

In SX i have been getting this error over 2 projects.

http://www.hardwareheaven.com/showthr...&threadid=30617


any help wud be greatly appreciated. thank you.

sidhu