digital signal in with no resampling ct4830

Csabi.o · Aug 11, 2004, 01:49 PM

Hi!

is there any way i could get a *exact* copy
of a digital-in signal (coming from an usb
device) at 44k or 48k? i have a live value
ct4830, so i dont have a digital-in jack, but i can
use the s/pdif input but then the signal gets resampled
and altered. any ideas, please? could it be done with
some repatching/routing in the asio section?

thanks,

Csabi

TravelRec. · Aug 12, 2004, 06:56 AM

No,

unfortunately not for this card. 10k2 cards with I2S on AUD_EXT only have that ability. All other digital inputs are resampled on the card before passing the DSP - this is an hardware issue. The only way to record bit to bit is to use the DIRECT SPDIF RECORDING - mode in kx-mixer (if available for your card), which is currently only working with WinMM-recording applications (not ASIO).

Greetings!

TravelRec.

Aug 11, 2004, 01:49 PM	#1
Csabi.o DriverHeaven Newbie Join Date: Aug 2004 Posts: 1 Rep Power: 0	digital signal in with no resampling ct4830 Hi! is there any way i could get a exact copy of a digital-in signal (coming from an usb device) at 44k or 48k? i have a live value ct4830, so i dont have a digital-in jack, but i can use the s/pdif input but then the signal gets resampled and altered. any ideas, please? could it be done with some repatching/routing in the asio section? thanks, Csabi

Aug 12, 2004, 06:56 AM	#2
TravelRec. Alternative Audioproductions Join Date: Sep 2003 Location: Germany / Sachsen-Anhalt Posts: 1,710 Rep Power: 0	No, unfortunately not for this card. 10k2 cards with I2S on AUD_EXT only have that ability. All other digital inputs are resampled on the card before passing the DSP - this is an hardware issue. The only way to record bit to bit is to use the DIRECT SPDIF RECORDING - mode in kx-mixer (if available for your card), which is currently only working with WinMM-recording applications (not ASIO). Greetings! TravelRec. __________________ Always take a look behind.