Kx driver problems with cubase

hetfield_roam · Jul 24, 2005, 11:39 AM

haha! it almost like i think that u guys are getting paid for helping me, if u do have icq or msn u can send me screenshots there and i can see how u have connected, because unfourtnatley im a bit ..slow with all these inputs outputs and so on, and since i am a total beginner with cubase at all it is kinda hard to udnerstand the logic behind all those terms, but u can reach me on icq: 58707710 or msn: hetfield_roam@hotmail.com
i would appreciate this very much, thanks again

trevbushell · Jul 24, 2005, 11:50 AM

[color=red]http://homepage.ntlworld.com/jc.bushell/[/color]

go to my site and look at screen2 .bmp.
this is a very basic setup to start with which will send you on your way hopefully???

you need to then find in cubase where the ASIO input is going to (that depends where you connect in the dsp ASIO window).
once you found it then you can record it!
easy[color=red]

[/color]
trev

hetfield_roam · Jul 24, 2005, 11:53 AM

ok i will start with my own dsp now trying to copy from ur bmp, but i have loaded the src first, and changed from line in to mic ac97 because i will use a mic to record, thats a correct start right? then just fill up with the others stuff.

trevbushell · Jul 24, 2005, 11:56 AM

Quote:

Originally Posted by hetfield_roam

ok i will start with my own dsp now trying to copy from ur bmp, but i have loaded the src first, and changed from line in to mic ac97 because i will use a mic to record, thats a correct start right? then just fill up with the others stuff.

i dont know!
my line in (mic) is A3/A4 in. but i use an APS soundcard so yours may be different! just fiddle with the inputs in the src untill you get a level! use a 'peak meter' in dsp to monitor the level!

trevbushell · Jul 24, 2005, 12:05 PM

after you have done the dsp go into cubase.

have you set your vst ASIO inputs? this is found in cubase/devices/vst connections. you can add as many input busses as you need. i.e.- stereo, stereo1, stereo2 etc. connect them to
stereo- L- 1 kx out 00
R- 2 kxout 01

stereo 1- L- 3kx out02
R- 4kx out03

etc etc. do you get it?

hetfield_roam · Jul 24, 2005, 12:06 PM

ok i will load a peak meter and just sitting and tapping on the mic and it should soon find its signal right. wow...this is very funny. but confusing, u didnt have msn or icq?

trevbushell · Jul 24, 2005, 12:10 PM

i have skype! if you search on the net and load skype i can talk with you.

whats funny?

hetfield_roam · Jul 24, 2005, 12:14 PM

wow!! i got singal in the peak meterfrom the first src!! haha....my first true step to world-domination of home-recording! But one thing, in ur page u dram the connections from just one same src (left i think) but in lemurys pic it is from both, how do i know the difference?

so i have copied the dsp setup from this page since it was a lot easier than ur settings:
http://members.home.nl/nahutec/kxtutor/quickkx.htm

so when i setup the other src how do i know what to choose there? sorry if i am asking so many things but i still dnt really know what i am doing, im just pushing what u tell me to push,,but maybe with time i will start understanding what i actually do

hetfield_roam · Jul 24, 2005, 12:15 PM

well my english insnt very good but i can type in skype too right?

trevbushell · Jul 24, 2005, 12:18 PM

ok to make it easy... i have msn now (just downloaded it!!)

whats your msn address. ok....got you! lets talk

hetfield_roam · Jul 24, 2005, 02:49 PM

Trev and all u other guys!! thank u very much..after 10+ hours of fiddling with all these setups i got it working, still many other problem remains, but the main problem with the recording is solved. thanks

trevbushell · Jul 24, 2005, 03:36 PM

cool, glad we sorted it (after 2 hrs of msn chat!!!!)see you later on msn and well sort out the other problems for you!

Russ · Jul 25, 2005, 12:51 AM

I am glad you guys got it sorted out

Jul 24, 2005, 11:50 AM	#32
trevbushell DriverHeaven Addict Join Date: Feb 2005 Location: portsmouth, england Posts: 323 Rep Power: 0	[color=red]http://homepage.ntlworld.com/jc.bushell/[/color] go to my site and look at screen2 .bmp. this is a very basic setup to start with which will send you on your way hopefully??? you need to then find in cubase where the ASIO input is going to (that depends where you connect in the dsp ASIO window). once you found it then you can record it! easy[color=red][/color] trev __________________ [COLOR=black]http://www.myspace.com/trevbushell[/COLOR] Last edited by trevbushell; Jul 24, 2005 at 12:02 PM.

Jul 24, 2005, 12:05 PM	#35
trevbushell DriverHeaven Addict Join Date: Feb 2005 Location: portsmouth, england Posts: 323 Rep Power: 0	after you have done the dsp go into cubase. have you set your vst ASIO inputs? this is found in cubase/devices/vst connections. you can add as many input busses as you need. i.e.- stereo, stereo1, stereo2 etc. connect them to stereo- L- 1 kx out 00 R- 2 kxout 01 stereo 1- L- 3kx out02 R- 4kx out03 etc etc. do you get it? __________________ [COLOR=black]http://www.myspace.com/trevbushell[/COLOR]

Jul 24, 2005, 12:10 PM	#37
trevbushell DriverHeaven Addict Join Date: Feb 2005 Location: portsmouth, england Posts: 323 Rep Power: 0	i have skype! if you search on the net and load skype i can talk with you. whats funny? __________________ [COLOR=black]http://www.myspace.com/trevbushell[/COLOR]

Jul 24, 2005, 12:18 PM	#40
trevbushell DriverHeaven Addict Join Date: Feb 2005 Location: portsmouth, england Posts: 323 Rep Power: 0	ok to make it easy... i have msn now (just downloaded it!!) whats your msn address. ok....got you! lets talk __________________ [COLOR=black]http://www.myspace.com/trevbushell[/COLOR] Last edited by trevbushell; Jul 24, 2005 at 02:18 PM.

Jul 24, 2005, 03:36 PM	#42
trevbushell DriverHeaven Addict Join Date: Feb 2005 Location: portsmouth, england Posts: 323 Rep Power: 0	cool, glad we sorted it (after 2 hrs of msn chat!!!!)see you later on msn and well sort out the other problems for you! __________________ [COLOR=black]http://www.myspace.com/trevbushell[/COLOR]

Jul 24, 2005, 11:39 AM	Thread Starter #31
hetfield_roam DriverHeaven Junior Member Join Date: Jul 2005 Posts: 24 Rep Power: 0	haha! it almost like i think that u guys are getting paid for helping me, if u do have icq or msn u can send me screenshots there and i can see how u have connected, because unfourtnatley im a bit ..slow with all these inputs outputs and so on, and since i am a total beginner with cubase at all it is kinda hard to udnerstand the logic behind all those terms, but u can reach me on icq: 58707710 or msn: hetfield_roam@hotmail.com i would appreciate this very much, thanks again

Jul 24, 2005, 11:53 AM	Thread Starter #33
hetfield_roam DriverHeaven Junior Member Join Date: Jul 2005 Posts: 24 Rep Power: 0	ok i will start with my own dsp now trying to copy from ur bmp, but i have loaded the src first, and changed from line in to mic ac97 because i will use a mic to record, thats a correct start right? then just fill up with the others stuff.

Jul 24, 2005, 12:06 PM	Thread Starter #36
hetfield_roam DriverHeaven Junior Member Join Date: Jul 2005 Posts: 24 Rep Power: 0	ok i will load a peak meter and just sitting and tapping on the mic and it should soon find its signal right. wow...this is very funny. but confusing, u didnt have msn or icq?

Jul 24, 2005, 12:14 PM	Thread Starter #38
hetfield_roam DriverHeaven Junior Member Join Date: Jul 2005 Posts: 24 Rep Power: 0	wow!! i got singal in the peak meterfrom the first src!! haha....my first true step to world-domination of home-recording! But one thing, in ur page u dram the connections from just one same src (left i think) but in lemurys pic it is from both, how do i know the difference? so i have copied the dsp setup from this page since it was a lot easier than ur settings: http://members.home.nl/nahutec/kxtutor/quickkx.htm so when i setup the other src how do i know what to choose there? sorry if i am asking so many things but i still dnt really know what i am doing, im just pushing what u tell me to push,,but maybe with time i will start understanding what i actually do

Jul 24, 2005, 12:15 PM	Thread Starter #39
hetfield_roam DriverHeaven Junior Member Join Date: Jul 2005 Posts: 24 Rep Power: 0	well my english insnt very good but i can type in skype too right?

Jul 24, 2005, 02:49 PM	Thread Starter #41
hetfield_roam DriverHeaven Junior Member Join Date: Jul 2005 Posts: 24 Rep Power: 0	Trev and all u other guys!! thank u very much..after 10+ hours of fiddling with all these setups i got it working, still many other problem remains, but the main problem with the recording is solved. thanks

Jul 25, 2005, 12:51 AM	#43
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,563 Rep Power: 62	I am glad you guys got it sorted out