HELP with nuendo 3 and audigy2 zs proplatinum

deadly_sinn · Mar 8, 2006, 06:02 PM

ok so i got the new drivers and all was good, then i took all my bits to the studio and lo and behold....NO imputs in my vst connections and so on...so i had to revert to the CAck creative drivers to record....what the hell did i do wrong????...please help..

Maddogg6 · Mar 8, 2006, 07:57 PM

I have a A2ZS as well and it (KX V3538J) installed no problem.
Did you follow the KX installation instructions?
Did you get any errors while installing KX?
Do you get errors opening the KX ASIO Control Panel?

**dj_stick** · Mar 8, 2006, 08:41 PM

set your sample rate to 48khz, you should see inputs then

deadly_sinn · Mar 9, 2006, 01:54 PM

i get all my inputs..when i check it out in the asio settings thingy..i see about 16 chanels...only thing is that the dont work properly..noone of them give me a signal...like, for exapample...chanel 17 is supposed to be micR i think...but that channel doesnt give my any input...i put my inputs in vst connections to show 24....and selected the right input channel..but no joy....im super confused.......and as for the other question..i had no issues on install..it went fine......but ja..im still not sure what is going on...n e help would help

...

**dj_stick** · Mar 9, 2006, 09:15 PM

you need to set up your DSP correctly

deadly_sinn · Mar 10, 2006, 09:24 AM

so erm...this may sund stupid, but how do i do that then...im not to super sure what i would be doing...can you help me set itt up...or explain what i need to do..or where i need to go to set it up

**dj_stick** · Mar 10, 2006, 11:49 AM

check the kx resource and docs announcement for a link to Lex's dsp guide, that should be a start

deadly_sinn · Mar 11, 2006, 05:23 PM

ok so i figured out how to get my inputs working properly..but now.....thie first time i set my vst connections in nuendo, it all worked...then i close nuendo, i open it up again and check the vst inputs in device setup and all of a sudden my vst inputs are gone...it shows all the outputs tho...so i reinstall kx drivers to see if that will help..and nothing...so im stumped...im gonna try reinstall my sooftware again and see if there is a change...but has anyone had this happen?...please im getting desperate

thomasabarnes · Mar 11, 2006, 06:18 PM

If Nuendo's User Interface is similar to that of Cubase SX, see this guide for setup help:
http://www.hardwareheaven.com/general-discussion/57078-newbie-guide-how-setup-cubase-sx-kx.html

deadly_sinn · Mar 11, 2006, 06:47 PM

the thing is...i went through the whole setup and set it all...and it worked untill i restarted nuendo....then it descided it didnt want to see my inputs...but it saw them before....
basicially i reinstalled nuendo, setup my inputs and all..left the dsp default...and everything worked when i sorted out my vst connections...later on i closed nuendo and then when i opened it up again, it wouldnt see my vst inputs....even after i reapplied my vst connections preset that i made...does this make any sense?

**dj_stick** · Mar 11, 2006, 11:16 PM

make sure you set the nuendo defaults correctly, make sure that it always defaults to 48khz

deadly_sinn · Mar 12, 2006, 07:22 AM

so here is a question...i had it working on 44.1 and then when i restarted nuendo it wouldnt work....now it only works with 48...so i guese i will have to make all my new stuff in 48..which is better..:P...i just didnt know anybetter a while back and then got lazy cuz i didnt want to convert anything:P.....oh well...thanks for the help tho...is there a reason on why it only works at 48 and not at 44.1?...

Maddogg6 · Mar 12, 2006, 07:52 AM

its 48Khz because its the native sample rate for 10KX DSP chip.

deadly_sinn · Mar 12, 2006, 07:59 AM

ok...interesting...thanks for the help and stuff guys

...

Mar 8, 2006, 06:02 PM	#1
deadly_sinn DriverHeaven Newbie Join Date: Jan 2006 Posts: 9 Rep Power: 0	HELP with nuendo 3 and audigy2 zs proplatinum ok so i got the new drivers and all was good, then i took all my bits to the studio and lo and behold....NO imputs in my vst connections and so on...so i had to revert to the CAck creative drivers to record....what the hell did i do wrong????...please help..

Mar 9, 2006, 01:54 PM	Thread Starter #4
deadly_sinn DriverHeaven Newbie Join Date: Jan 2006 Posts: 9 Rep Power: 0	i get all my inputs..when i check it out in the asio settings thingy..i see about 16 chanels...only thing is that the dont work properly..noone of them give me a signal...like, for exapample...chanel 17 is supposed to be micR i think...but that channel doesnt give my any input...i put my inputs in vst connections to show 24....and selected the right input channel..but no joy....im super confused.......and as for the other question..i had no issues on install..it went fine......but ja..im still not sure what is going on...n e help would help...

Mar 11, 2006, 06:18 PM	#9
thomasabarnes Long Time ***** Friend Join Date: Jan 2003 Location: USA Posts: 1,375 Rep Power: 0 System Specs	If Nuendo's User Interface is similar to that of Cubase SX, see this guide for setup help: http://www.hardwareheaven.com/general-discussion/57078-newbie-guide-how-setup-cubase-sx-kx.html __________________ May a song always touch you in a positive way. SONAR X1D Expanded, Windows 7 Pro 64Bit, MOTU UltraLite MK3, 150 GB HDD, 250 GB HDD, 1 TB x2 HDD 7200 rpm My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs

Mar 12, 2006, 07:59 AM	Thread Starter #14
deadly_sinn DriverHeaven Newbie Join Date: Jan 2006 Posts: 9 Rep Power: 0	ok...interesting...thanks for the help and stuff guys...

Mar 8, 2006, 07:57 PM	#2
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	I have a A2ZS as well and it (KX V3538J) installed no problem. Did you follow the KX installation instructions? Did you get any errors while installing KX? Do you get errors opening the KX ASIO Control Panel?

Mar 10, 2006, 09:24 AM	Thread Starter #6
deadly_sinn DriverHeaven Newbie Join Date: Jan 2006 Posts: 9 Rep Power: 0	so erm...this may sund stupid, but how do i do that then...im not to super sure what i would be doing...can you help me set itt up...or explain what i need to do..or where i need to go to set it up

Mar 11, 2006, 05:23 PM	Thread Starter #8
deadly_sinn DriverHeaven Newbie Join Date: Jan 2006 Posts: 9 Rep Power: 0	ok so i figured out how to get my inputs working properly..but now.....thie first time i set my vst connections in nuendo, it all worked...then i close nuendo, i open it up again and check the vst inputs in device setup and all of a sudden my vst inputs are gone...it shows all the outputs tho...so i reinstall kx drivers to see if that will help..and nothing...so im stumped...im gonna try reinstall my sooftware again and see if there is a change...but has anyone had this happen?...please im getting desperate

Mar 11, 2006, 06:47 PM	Thread Starter #10
deadly_sinn DriverHeaven Newbie Join Date: Jan 2006 Posts: 9 Rep Power: 0	the thing is...i went through the whole setup and set it all...and it worked untill i restarted nuendo....then it descided it didnt want to see my inputs...but it saw them before.... basicially i reinstalled nuendo, setup my inputs and all..left the dsp default...and everything worked when i sorted out my vst connections...later on i closed nuendo and then when i opened it up again, it wouldnt see my vst inputs....even after i reapplied my vst connections preset that i made...does this make any sense?

Mar 12, 2006, 07:22 AM	Thread Starter #12
deadly_sinn DriverHeaven Newbie Join Date: Jan 2006 Posts: 9 Rep Power: 0	so here is a question...i had it working on 44.1 and then when i restarted nuendo it wouldnt work....now it only works with 48...so i guese i will have to make all my new stuff in 48..which is better..:P...i just didnt know anybetter a while back and then got lazy cuz i didnt want to convert anything:P.....oh well...thanks for the help tho...is there a reason on why it only works at 48 and not at 44.1?...

Mar 12, 2006, 07:52 AM	#13
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	its 48Khz because its the native sample rate for 10KX DSP chip.