Can't connect audigy 2 spdif out to 1212m in

JGSF · Apr 6, 2006, 01:04 PM

Hey guys, could you help me?

I'm trying yo connect my audigy's front bay spdif out to my 1212m spdif in but I get no sound at all in the 1212 input...

- wich spdif in the epilog corresponds to the audigy 2 front bay?
- Can spdif be at 44khz?
- 1212m clock is set to internal (44khz, I need that exact samplerate)
- What settings should be in the kx mixer?

Many thanks!

**dj_stick** · Apr 6, 2006, 01:22 PM

1212 clock, if using the DSP, is 48khz, just like other 10kX cards

make sure you've set the output level correctly in the i/o window of the mixer, or set up your DSP correctly

JGSF · Apr 6, 2006, 01:34 PM

It is? Are you sure? But I can set Patchmix to 44Khz, I thought the E-DSP was a slightly different version to operate at 44Khz, at least that's what they claim...

If I set spdif to 48khz can I use ASIO at 44khz in 1212m anyway?

edit: and there's a 44Khz setting in the kx mixer, you mean it doesn't work?

JGSF · Apr 9, 2006, 12:28 PM

Err... help?

I can't make anything work, I've tried 44Khz, 48Khz but I get no sound at all... I tried to put the 1212m as slave.

I simply get no input in the 1212m from the Audigy output...

Am I doing anything wrong? Isn't spdif as simple as just plugging the cable, set samplerate, set master/slave and umute ins/outs?

**dj_stick** · Apr 9, 2006, 12:36 PM

make sure your DSP is set correctly - are you actually sending signal to the SPDIF output you are using?

JGSF · Apr 9, 2006, 12:38 PM

Just in case, I sent the signal to ALL the Spdif's in the prolog.

But I get no sound at all anyway...

Apr 6, 2006, 01:04 PM	#1
JGSF HardwareHeaven Senior Member Join Date: Jul 2004 Posts: 452 Rep Power: 0	Can't connect audigy 2 spdif out to 1212m in Hey guys, could you help me? I'm trying yo connect my audigy's front bay spdif out to my 1212m spdif in but I get no sound at all in the 1212 input... - wich spdif in the epilog corresponds to the audigy 2 front bay? - Can spdif be at 44khz? - 1212m clock is set to internal (44khz, I need that exact samplerate) - What settings should be in the kx mixer? Many thanks!

Apr 6, 2006, 01:34 PM	Thread Starter #3
JGSF HardwareHeaven Senior Member Join Date: Jul 2004 Posts: 452 Rep Power: 0	It is? Are you sure? But I can set Patchmix to 44Khz, I thought the E-DSP was a slightly different version to operate at 44Khz, at least that's what they claim... If I set spdif to 48khz can I use ASIO at 44khz in 1212m anyway? edit: and there's a 44Khz setting in the kx mixer, you mean it doesn't work?

Apr 9, 2006, 12:28 PM	Thread Starter #4
JGSF HardwareHeaven Senior Member Join Date: Jul 2004 Posts: 452 Rep Power: 0	Err... help? I can't make anything work, I've tried 44Khz, 48Khz but I get no sound at all... I tried to put the 1212m as slave. I simply get no input in the 1212m from the Audigy output... Am I doing anything wrong? Isn't spdif as simple as just plugging the cable, set samplerate, set master/slave and umute ins/outs?

Apr 9, 2006, 12:38 PM	Thread Starter #6
JGSF HardwareHeaven Senior Member Join Date: Jul 2004 Posts: 452 Rep Power: 0	Just in case, I sent the signal to ALL the Spdif's in the prolog. But I get no sound at all anyway...