Can't hear from all speakers at test

metabesk · May 11, 2006, 04:46 PM

I have SB0102 5.1. I use a streo music set with 2 speakers mounted to this set. So I need good stereo sound in games also. But when i run the speaker set.The speaker configuration is set at 5.1 surround speakers at Windows configuration, I can only get sound from center, right front and right rear when i set 2.1 copy at surrounder, when i set 5.1 copy at surrounder, i get sound from only right front . How can i do the settings and which socket do i need to plug the stereo jack behind the SB0102?

Thank you in advance.

Russ · May 11, 2006, 04:52 PM

You would probably want to connect the speakers to the jack for analog rear, and use the Toggle Swap Front and Rear mode option in kxmixer.

Additionally, if you want to hear the sounds from the rear channels, you would want to set Surrounder to the 2.0 Surround Mix preset.

metabesk · May 12, 2006, 08:48 AM

Thank you Russ,

But I only have 2.1,4.1 and 5.1 settings in Surrounder. I don't have 2.0.
Any suggestions?

Thanks in advance

Maddogg6 · May 12, 2006, 09:21 AM

Use the 2.1 - and turn off the 'Use Sub Woofer Output'

Russ · May 12, 2006, 11:40 AM

Quote:

Originally Posted by metabesk

Thank you Russ,

But I only have 2.1,4.1 and 5.1 settings in Surrounder. I don't have 2.0.
Any suggestions?

Thanks in advance

The presets are located at the bottom of Surrounder's window (next to the Reset and Mute buttons), and you should have one called 2.0 Surround Mix (but that could depend on which version of kX you are using). In any case, as Maddogg6 stated it is just 2.1, with Surround: ON (not copy), and Use Subwoofer output: Unchecked (BTW: I think it is the default setting).

metabesk · May 15, 2006, 04:37 PM

Thank you guys for your kind help

May 11, 2006, 04:46 PM	#1
metabesk DriverHeaven Newbie Join Date: May 2006 Posts: 8 Rep Power: 0	Can't hear from all speakers at test I have SB0102 5.1. I use a streo music set with 2 speakers mounted to this set. So I need good stereo sound in games also. But when i run the speaker set.The speaker configuration is set at 5.1 surround speakers at Windows configuration, I can only get sound from center, right front and right rear when i set 2.1 copy at surrounder, when i set 5.1 copy at surrounder, i get sound from only right front . How can i do the settings and which socket do i need to plug the stereo jack behind the SB0102? Thank you in advance. Last edited by metabesk; May 11, 2006 at 04:51 PM.

May 11, 2006, 04:52 PM	#2
Russ HardwareHeaven Extreme Member Join Date: Jan 2005 Posts: 5,563 Rep Power: 62	You would probably want to connect the speakers to the jack for analog rear, and use the Toggle Swap Front and Rear mode option in kxmixer. Additionally, if you want to hear the sounds from the rear channels, you would want to set Surrounder to the 2.0 Surround Mix preset.

May 12, 2006, 08:48 AM	Thread Starter #3
metabesk DriverHeaven Newbie Join Date: May 2006 Posts: 8 Rep Power: 0	Thank you Russ, But I only have 2.1,4.1 and 5.1 settings in Surrounder. I don't have 2.0. Any suggestions? Thanks in advance

May 12, 2006, 09:21 AM	#4
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 4,027 Rep Power: 0	Use the 2.1 - and turn off the 'Use Sub Woofer Output'

May 15, 2006, 04:37 PM	Thread Starter #6
metabesk DriverHeaven Newbie Join Date: May 2006 Posts: 8 Rep Power: 0	Thank you guys for your kind help