How many inputs?

Rei Ayanami · May 24, 2006, 09:52 AM

Hi,
i am newbie and got a problem.
how many external inputs can i connect to my audigy?
I wanna record a drumset. In drumset there are 3,4,5 or 6 mics. I wanna record this mics in independent channels with adobe audition 2.0 or Sonar Producer 5. Is possible do it? and How is possible?
Thanks in advance and regards.

Sorry for my english...

Doug W · May 24, 2006, 02:27 PM

Rei,

The amount of possible inputs depends on your model of Audigy card. Most audigy cards have a possibility of 4 analog inputs. There are also some SPDIF inputs (older Audigy cards have more than the newer ones).

What is the model number of your card? Do you have an external LiveDrive?

Rei Ayanami · May 24, 2006, 03:11 PM

i don't now what is the model. i know the card got emu 10k2 and is Audigy 1.

I haven't got livedrive modul.
if i can got 4 analog inputs. how can i do?

Regards.

Doug W · May 24, 2006, 08:52 PM

The older Audigy 1 cards, like the SB0090 have more SPDIF inputs and outputs than the Audigy 2 cards. dj_stick started a thread about how to get the extra inputs from your Audigy:
http://www.hardwareheaven.com/general-discussion/50590-quick-guide-get-extra-inputs-your-card.html

You have 2 Mono inputs through your Line in, using a mixer you can pan a track hard left and another hard right to get 2 Mono inputs.

The other 2 mono inputs can be utilized by following dj_sticks method above to access the 2nd AC97 chip on the Audigy.

I have an unfinished website explaining how to make the input dj_stick talked about.
http://www.maxminn.com/emily40/Auxsc00.html

The last page is unfinished but you need the ProFx to access the 2nd AC97 chip.
http://members.home.nl/nahutec/ProFx/profx3x.htm

I use a DSP like this for recording 2 computers
http://www.maxminn.com/emily40/image...P-3-outs-2.jpg

Rei Ayanami · May 24, 2006, 09:46 PM

My card is a SB0231. I read the links and i think is complex but i will try. If i got a I/O adaptor made for hooking an onboard sound them
i not need soldering, it's ok? and other question how to setup kx dsp for i can use analog inputs with ASIO driver.
Thanks in advance.
Regards.

**dj_stick** · May 25, 2006, 12:42 AM

exactly, you don't need to solder, just re-arrange the pins in the connector to suit the AUD_EXT pinout
if you have onboard sound with SPDIF output, you can also use the line in if you connect it correctly (you'll need to know the pinout of the SPDIF header on the motherboard if there is one)

as for the dsp, simply draw a connection between the analogue (and digital if used) inputs on the prolog to the ASIO connections in the epilog

Rei Ayanami · May 25, 2006, 08:37 AM

Thanks for your answer but can you give me a kx dsp graphic of how to setup for ASIO. Kx dsp is other language for me, i was triying setup but result is ever foul.

Regards

**dj_stick** · May 25, 2006, 10:06 AM

read lemury's guide on the dsp, it's complex at first, but if you understand the idea of physical studio patching, it becomes easier

May 24, 2006, 09:52 AM	#1
Rei Ayanami DriverHeaven Newbie Join Date: May 2006 Posts: 4 Rep Power: 0	How many inputs? Hi, i am newbie and got a problem. how many external inputs can i connect to my audigy? I wanna record a drumset. In drumset there are 3,4,5 or 6 mics. I wanna record this mics in independent channels with adobe audition 2.0 or Sonar Producer 5. Is possible do it? and How is possible? Thanks in advance and regards. Sorry for my english...

May 24, 2006, 02:27 PM	#2
Doug W HardwareHeaven Senior Member Join Date: Mar 2003 Location: Montevideo, MN USA Posts: 973 Rep Power: 0	Rei, The amount of possible inputs depends on your model of Audigy card. Most audigy cards have a possibility of 4 analog inputs. There are also some SPDIF inputs (older Audigy cards have more than the newer ones). What is the model number of your card? Do you have an external LiveDrive?

May 24, 2006, 03:11 PM	Thread Starter #3
Rei Ayanami DriverHeaven Newbie Join Date: May 2006 Posts: 4 Rep Power: 0	i don't now what is the model. i know the card got emu 10k2 and is Audigy 1. I haven't got livedrive modul. if i can got 4 analog inputs. how can i do? Regards.

May 24, 2006, 08:52 PM	#4
Doug W HardwareHeaven Senior Member Join Date: Mar 2003 Location: Montevideo, MN USA Posts: 973 Rep Power: 0	The older Audigy 1 cards, like the SB0090 have more SPDIF inputs and outputs than the Audigy 2 cards. dj_stick started a thread about how to get the extra inputs from your Audigy: http://www.hardwareheaven.com/general-discussion/50590-quick-guide-get-extra-inputs-your-card.html You have 2 Mono inputs through your Line in, using a mixer you can pan a track hard left and another hard right to get 2 Mono inputs. The other 2 mono inputs can be utilized by following dj_sticks method above to access the 2nd AC97 chip on the Audigy. I have an unfinished website explaining how to make the input dj_stick talked about. http://www.maxminn.com/emily40/Auxsc00.html The last page is unfinished but you need the ProFx to access the 2nd AC97 chip. http://members.home.nl/nahutec/ProFx/profx3x.htm I use a DSP like this for recording 2 computers http://www.maxminn.com/emily40/image...P-3-outs-2.jpg

May 24, 2006, 09:46 PM	Thread Starter #5
Rei Ayanami DriverHeaven Newbie Join Date: May 2006 Posts: 4 Rep Power: 0	My card is a SB0231. I read the links and i think is complex but i will try. If i got a I/O adaptor made for hooking an onboard sound them i not need soldering, it's ok? and other question how to setup kx dsp for i can use analog inputs with ASIO driver. Thanks in advance. Regards.

May 25, 2006, 08:37 AM	Thread Starter #7
Rei Ayanami DriverHeaven Newbie Join Date: May 2006 Posts: 4 Rep Power: 0	Thanks for your answer but can you give me a kx dsp graphic of how to setup for ASIO. Kx dsp is other language for me, i was triying setup but result is ever foul. Regards