5.10.0.3531 There are awesome

Robert McClelland · Mar 28, 2003, 03:04 AM

It sound much better now which I don't have any trouble but much easyer chose which mode you want with these drivers. IS there going be plan add cross fade up and down to the sub woofer base like good old nforce drivers had? When I had them amd 2000+ ehe long time ago if you guys get that into your next version then should be offilce drivers of the year

Keep up great work you two. PS maybe you can snatch cross fade driver bass from nforce drivers since they do have one make sub really loud on the floor.

Max M. · Mar 28, 2003, 10:37 AM

"cross fade up and down" - mmm... i'm not sure i understand what this means... ?

Robert McClelland · Mar 28, 2003, 08:07 PM

It's called Cross fade Volume controll. Lets you enble make the base of the nosie goes up and down if you want your sub woofer quite, you turn the cross fade all way up to 400-500 what ever you called it. If you want your base to be loud you turn it down to 50 something like that. If you have nforce system or maybe one of your freinds do as them. Lates nforce drivers have them installed along with EQ bands.

Max M. · Mar 29, 2003, 01:34 AM

Again not clear... Do you mean Split/Cross Frequency of Bass Redirection? Or just Level of Subwoofer signal? (400-500 of WHAT? - Hz? dB? %? $? Mb? Girls? ;))
Here is some screenshots from some nVidia drivers - could you say how exactly this control is called? - http://nvidia.com/view.asp?IO=nf_audio_01
"LFE Crossover Frequency"?

Robert McClelland · Mar 29, 2003, 03:22 AM

Yes, LFE Crossover Frequency, Max thats what I mean

It makes the base on the sub woofer quite and loud I really need at home that way I can turn down my sub woofers at night time so the it quite during the night when I play games and such. You think you do it with next verison? I really do miss nforce sound card that had them

heheh I love Audigy better. My second question is on Sourround mode chosing at the bottom. What is Direct path rear=front and movie modes mean?

Max M. · Mar 29, 2003, 03:33 AM

kx->effects->surrounder.... (kx ver. 31 is recommended)

Robert McClelland · Mar 29, 2003, 03:38 AM

kx ver. 31 is recommended what you mean by that? and Split Freq is that for lowing the base on sub woofer 10hz lowest mean quite and 320hz mean loud or other way around?

Max M. · Mar 29, 2003, 04:25 AM

"Split Freq" is the same thing as "LFE Crossover Frequency"... It adjust the Frequency above which signal extracted from Front(/Rear) is filtered and then sent to Subwoofer... For Level control use "sub" fader on "ins'n'outs" page....
Everything is just like in nForce drivers - although in different pages....

Mar 28, 2003, 03:04 AM	#1
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	5.10.0.3531 There are awesome It sound much better now which I don't have any trouble but much easyer chose which mode you want with these drivers. IS there going be plan add cross fade up and down to the sub woofer base like good old nforce drivers had? When I had them amd 2000+ ehe long time ago if you guys get that into your next version then should be offilce drivers of the year Keep up great work you two. PS maybe you can snatch cross fade driver bass from nforce drivers since they do have one make sub really loud on the floor. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png Last edited by Robert McClelland; Mar 28, 2003 at 03:10 AM.

Mar 28, 2003, 10:37 AM	#2
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,639 Rep Power: 69	"cross fade up and down" - mmm... i'm not sure i understand what this means... ? __________________

Mar 28, 2003, 08:07 PM	Thread Starter #3
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	It's called Cross fade Volume controll. Lets you enble make the base of the nosie goes up and down if you want your sub woofer quite, you turn the cross fade all way up to 400-500 what ever you called it. If you want your base to be loud you turn it down to 50 something like that. If you have nforce system or maybe one of your freinds do as them. Lates nforce drivers have them installed along with EQ bands. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png

Mar 29, 2003, 01:34 AM	#4
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,639 Rep Power: 69	Again not clear... Do you mean Split/Cross Frequency of Bass Redirection? Or just Level of Subwoofer signal? (400-500 of WHAT? - Hz? dB? %? $? Mb? Girls? ;)) Here is some screenshots from some nVidia drivers - could you say how exactly this control is called? - http://nvidia.com/view.asp?IO=nf_audio_01 "LFE Crossover Frequency"? __________________ Last edited by Max M.; Mar 29, 2003 at 01:43 AM.

Mar 29, 2003, 03:22 AM	Thread Starter #5
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	Yes, LFE Crossover Frequency, Max thats what I mean It makes the base on the sub woofer quite and loud I really need at home that way I can turn down my sub woofers at night time so the it quite during the night when I play games and such. You think you do it with next verison? I really do miss nforce sound card that had them heheh I love Audigy better. My second question is on Sourround mode chosing at the bottom. What is Direct path rear=front and movie modes mean? __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png

Mar 29, 2003, 03:33 AM	#6
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,639 Rep Power: 69	kx->effects->surrounder.... (kx ver. 31 is recommended) __________________

Mar 29, 2003, 03:38 AM	Thread Starter #7
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,645 Rep Power: 196 System Specs	kx ver. 31 is recommended what you mean by that? and Split Freq is that for lowing the base on sub woofer 10hz lowest mean quite and 320hz mean loud or other way around? __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png

Mar 29, 2003, 04:25 AM	#8
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,639 Rep Power: 69	"Split Freq" is the same thing as "LFE Crossover Frequency"... It adjust the Frequency above which signal extracted from Front(/Rear) is filtered and then sent to Subwoofer... For Level control use "sub" fader on "ins'n'outs" page.... Everything is just like in nForce drivers - although in different pages.... __________________ Last edited by Max M.; Mar 29, 2003 at 04:35 AM.